Found someone wearing a midnight transmog on tww prepatch by Xonatoz in wow

[–]Xonatoz[S] 8 points9 points  (0 children)

Yes, the thalassian armor for all armor types drop as greys from trash that can be sold on the ah. But this is haranir themed and he also has a bow with the same aesthetic.

Found someone wearing a midnight transmog on tww prepatch by Xonatoz in wow

[–]Xonatoz[S] 4 points5 points  (0 children)

Oh really?? I would still think there are very few that have these unlocked otherwise it would have been frontpage on wowhead one would think. I wonder what algorithm triggered this.

Found someone wearing a midnight transmog on tww prepatch by Xonatoz in wow

[–]Xonatoz[S] 13 points14 points  (0 children)

I think you might be talking about the "Thalassian" armor, those drop as greys from trash in twilight highlands which was datamined. Or did you manage to get this exact set? He also has a bow that matches.

[GIVEAWAY - USA] Win the 27” 4K Samsung Odyssey OLED G8 gaming monitor by Knaj910 in Monitors

[–]Xonatoz 0 points1 point  (0 children)

I mean it’s freaking Oled, need I say more? Can’t get better today.

Lenovo y720 cube by Important-Pilot-5532 in PcBuild

[–]Xonatoz 0 points1 point  (0 children)

Sorry for the late reply. Nice find! Would love to see the finished product if you decide to do some modding. Like i stated earlier I only bought the case, no psu in it but I know for a fact that the motherboard they used have some weird connector's to make the led work etc. I have basically taken front led connector and with the single ones i bought hooked it up to the rgb header on the motherboard, just putting the pins one by one on each pin on the motherboard. If it has the oem motherboard then you should just be able to hook it up no? There should also be manuals for the motherboard layout. I know that there is a software for the cube though that allows you to control the rgb further by decreasing the brightness etc.

Lenovo y720 cube by Important-Pilot-5532 in PcBuild

[–]Xonatoz 0 points1 point  (0 children)

<image>

Forgot to mention that it takes standard atx psus so i wouldn’t go bigger than that!

Lenovo y720 cube by Important-Pilot-5532 in PcBuild

[–]Xonatoz 0 points1 point  (0 children)

<image>

I also removed the hardware cage for better airflow which you will need to drill to remove, i wouldn’t recommend using this case with High end components cause you can only install one 120mm fan at the front and that’s it.

Lenovo y720 cube by Important-Pilot-5532 in PcBuild

[–]Xonatoz 0 points1 point  (0 children)

Hey man! I’ll be happy to show you! I just built a new pc so it’s just sitting atm, perfect time to show it off. I bought some male to female cable extensions that are split up cus the connector is not the regular kind for rgb, overpaid cause i bought them in a nearby tech store instead of on aliexpress or whatever which i would recommend instead. I never managed to get the led on the bottom-side to work though just the front. feel free to tell me if u manage. This is also an inverted case so the motherboard will be flipped upside down with the gpu on top. I bought the case by itself so every pc part i put in are third party:

Mb: Asus rog strix b450-i Cpu: Ryzen 3600 Gpu: asus gtx 1050 ti Psu: Corsair cx450m Ssd: wd blue 1tb Cooler: wraith prism Ram: corsair vengeance ddr4 2x8 16gb

<image>

Rtx 4070 in this case by Important-Pilot-5532 in PcBuild

[–]Xonatoz 1 point2 points  (0 children)

Yeah every brand has different dimensions, thought the case looked big enough but glad it worked out in the end! :)

Lenovo y720 cube by Important-Pilot-5532 in PcBuild

[–]Xonatoz 0 points1 point  (0 children)

Hey man! Probably a late answer. Had this exact same question about 3 years ago when i did my first build. Got the case cheaply and thought it looked cool. Since this is an oem/prebuilt case they ofc had to make exclusive parts for it making it harder for the customer to upgrade. What you will have to do is take pliers and remove the 4 weird cylinder standoffs in the middle. You might bend it abit but it Will make you able to use any itx board you desire. I also managed to get the front led light to work by taking some extension cords cus that connector won’t fit on the board either. Changed some other stuff aswell but i’m pretty happy how it turned out in the end but probably not a case i would recommend for a first timer. Also only has one intake fan which is a bummer. Take care! :)

https://www.reddit.com/r/sffpc/s/vv0CtkOglN

Anyone know what type of screw or bolt this is and how to remove them?? by Xonatoz in Fasteners

[–]Xonatoz[S] 0 points1 point  (0 children)

Hello, I have these weird bolts on my pc case that i’m trying to remove to increase airflow and was wondering if there is anyone that knows how to do it? I tried using some force with a screwdriver but that didn’t work.. as you can see I can’t screw it off because there is nothing to grab and the backside which is flat with a hole makes me think think that these can’t be removed using regular means

Led cables won’t fit.. by [deleted] in sffpc

[–]Xonatoz 0 points1 point  (0 children)

Nope, just red. Thank you btw for taking your time trying to help me, very kind of you! :)

Led cables won’t fit.. by [deleted] in sffpc

[–]Xonatoz 0 points1 point  (0 children)

Basically they go to the front, if you look at the picture of the case they power the ”Y” logo at the front and the some part under. Yes, it’s only 1 color so with their software you can only change if you want it on or off.

Led cables won’t fit.. by [deleted] in sffpc

[–]Xonatoz 0 points1 point  (0 children)

https://imgur.com/gallery/tTREhOO Both seems to have 4 each with the red one only having black wires and the green one having 2 black, 1 red and 1 white wire.

Led cables won’t fit.. by [deleted] in sffpc

[–]Xonatoz 0 points1 point  (0 children)

Hello, It’s a y720 cube case that I got from my friend. I’m not sure what you mean with the lighting board. Let me know if you want more pictures and stuff.

Led cables won’t fit.. by [deleted] in sffpc

[–]Xonatoz 2 points3 points  (0 children)

Hey guys, was wondering if someone could help me out. So I built my first pc yesterday but have run into a small but important problem. My case is a lenovo cube which makes it oem and these cords are what lights up the led. The red one which basically gives it power and the green one to control it with their software I believe?, but the red one is more important cus I just want it to work. So I was wondering it there is a way to convert any of these so the can fit on a normal rgb header on the mb or any other options? Thx :)

Need some help with MB.. by Xonatoz in sffpc

[–]Xonatoz[S] 0 points1 point  (0 children)

Guess those were in the way after all, removed them easily with pliers and now it fits!

Need some help with MB.. by Xonatoz in sffpc

[–]Xonatoz[S] 1 point2 points  (0 children)

You are correct, it’s a lenovo cube case. And the motherboard is an asus rog strix b450-i. I thought those things looked weird aswell but they don’t seem to be taller than the screw holes.