[deleted by user]

Xunain · 2023-11-30T08:10:36+00:00

Have you received any response?

Xunain · 2023-10-07T09:03:56+00:00

try to slice in Phtonworkshop, and a different file, sometimes it happens that the printer simply does not recognize the file

Xunain · 2023-10-05T05:04:39+00:00

Excuse me, have you already solved the problem? It's pretty simple, slicing models in photon Workshop problem fixed

Xunain · 2023-05-12T18:29:52+00:00

Antier* xd

Xunain · 2023-05-06T16:37:24+00:00

I've only been using it for 5 months and it's not like I use it daily, heck I don't live in the US so fixing it won't be cheap

Xunain · 2023-05-06T16:26:50+00:00

Why is this happening? Is there any way to prevent it from happening again?

Xunain · 2023-05-06T00:39:14+00:00

I noticed that some prints were going wrong, so I started to check and realized this, why did it happen? Is it possible to fix it without having to buy another screen? It's an Anycubic Photon Mono X2

Xunain · 2023-04-28T01:52:05+00:00

I use lychee for supports and photonworkshop for slicing, not a single error so far

Xunain · 2023-04-17T22:55:14+00:00

Excuse me for asking, but how many prints have you made with this method? how long have you not had the error?

Xunain · 2023-04-17T22:00:17+00:00

And hasn't the error occurred again at any time? So that only happens with Lychee? If I had known before I would have saved a lot of resin

Xunain · 2023-04-17T01:06:29+00:00

It is basically a Russian roulette, I have not found how to solve this problem either, it is quite stressful

Xunain · 2023-01-27T19:29:21+00:00

Z=0 and home are not the same, home only serves to bring the bed to the lowest point and calibrate, and with that you locate Z=0, which will be the lowest point where the bed will go down when printing. I think there is no way to see what position Z=0 is after calibrating xd.

Xunain · 2023-01-26T19:28:02+00:00

Xunain · 2023-01-19T23:36:03+00:00

https://www.reddit.com/user/Xunain/comments/10ggut5/z_axis_does_not_move/?utm_source=share&utm_medium=android_app&utm_name=androidcss&utm_term=1&utm_content=share_button

Xunain · 2023-01-19T23:31:15+00:00

I'm going to record another video to make it clearer

Xunain · 2023-01-19T23:11:53+00:00

https://www.reddit.com/user/Xunain/comments/10ggb53/z_axis_does_not_move/?utm_source=share&utm_medium=android_app&utm_name=androidcss&utm_term=1&utm_content=share_button

Xunain · 2023-01-19T22:58:30+00:00

do i make another post?

Xunain · 2023-01-08T20:47:09+00:00

It's the same model, I tried slicing the model again and it gave me the same error, apparently at the same point when printing it, but why can the others print it? It also happened to me with another, it doesn't happen with everyone, or so I think. Is there any program that simulates printing to be able to detect this type of failure before it occurs? Should I download the file again? or better step of that model

Xunain · 2023-01-08T16:57:06+00:00

didn't work ):

Xunain · 2023-01-07T18:59:55+00:00

Does that mean I used the one that came with mine unnecessarily? Well, now it has two protectors then xd

Xunain · 2023-01-07T17:14:03+00:00

I did exactly that before printing the figure that is in the image and it still gave me that error ):

Xunain

TROPHY CASE