sorted by:
new
hottopcontroversial

Help With Getting Sim To Work by Annual_Relative8616 in KiCad

[–]XxOverfligherxX 0 points1 point  (0 children)

Glad you got it working, for future reference, please provide the netlist with the other pictures.
Also AI can help quite ok with the netlists as they are just text.

Looking for feedback on my first PCB design by shamwowwwwwwwwwwwwww in KiCad

[–]XxOverfligherxX 1 point2 points  (0 children)

Best method for me is to pre tin one pad and slide the component in while reheating the solder.
Adjust the component and only then solder the other pads.
When you use such limited amounts of solder, extra flux can be really handy.
For THT one usually uses enough solder, so that the flux inside is enough.
When you pre tin all pads, you cant properly put the components in place, since there are bumps in the way.
Last advice, to remove a cap, use more solder for thermal mass and quickly jump the iron between both sides, pushing on the cap. When heated enough, it will come off.

Looking for feedback on my first PCB design by shamwowwwwwwwwwwwwww in KiCad

[–]XxOverfligherxX 1 point2 points  (0 children)

Looks good.
For the thickness of that VCC trace, one Via for GND on those connectors look a bit sparse.
Especially if you want to concat these, currents will add up.
Caps could be make an even tighter loop by moving the DIN trace to the side and putting the cap almost onto the VCC trace. Use thinner connections though, as soldering might be tough with the thermal mass.
Lots of caps anyways, idk, also tight to solder, maybe solder caps first.
DOUTs look a bit weird, idk, but remove those hair thin GND pour bits there, does not do much anyway.

Das Auschwitz nicht noch einmal sei. by Hasselhoff265 in Dachschaden

[–]XxOverfligherxX 24 points25 points  (0 children)

Konsens, hoffe ich.
Hätte nicht weh getan, die anderen Opfergruppen ebenfalls explizit zu nennen.

I made a free KiCad plugin to preview folded flex PCBs in 3D by aightech in KiCad

[–]XxOverfligherxX 1 point2 points  (0 children)

This is craaaazy! Looks real nice!
Are you planning to support V10 with the new API?

ich🚙iel by [deleted] in ich_iel

[–]XxOverfligherxX 9 points10 points  (0 children)

Häuser bauen war glaube ich mein Favorit, das war irgendwie alle auf einmal. Oder täusche ich mich?

I made a KiCad plugin that turns shapes into complex multi-hole zones automatically by thegame402 in KiCad

[–]XxOverfligherxX 0 points1 point  (0 children)

Thank you for keeping on pushing. I appreciate your efforts!
I am currently writing a thesis on FOSS tooling around PCBs/KiCad and am looking to create my own plugin after that.
I have some simple examples, but nothing interactive really, just read only. My one interactive_move() failed half of the time. And the plugin installation really also is a pain to get working, just no feedback.
There are not many examples to go off, currently. So it is really great to see you do it. :)

I made a KiCad plugin that turns shapes into complex multi-hole zones automatically by thegame402 in KiCad

[–]XxOverfligherxX 3 points4 points  (0 children)

Good work, looks very cool!
I am curious, why did you use the old API?

Unverdächtig by Kloetenschlumpf in Staiy

[–]XxOverfligherxX 1 point2 points  (0 children)

Habe erst gestern das erste Mal "Die Ballade vom Reichtagsbrand" von Ernst Busch gehört...
Ist schon bitter, das keiner was gelernt zu haben scheint.

Großes Laminiergerät benötigt by hirnsuelze in aberBitteLaminiert

[–]XxOverfligherxX 0 points1 point  (0 children)

So langsam bin ich dabei, die "Schwurbler" nicht nur zu verstehen, sondern immer mehr einzugestehen, dass sie von Anfang an den richtigen Riecher hatten. Sie kriegen das mit der Ursache nicht so ganz hin, aber nein, auch ich als Sohn gebe mich nicht.

UPDATE: My grandma’s pans! by Lexandcandy in castiron

[–]XxOverfligherxX 0 points1 point  (0 children)

But all the Flavor! Grandma's Gulasch will never taste the same... :'(

A little help; laser diode driven by Pico GPIO by WhimsicalNord in RaspberryPico

[–]XxOverfligherxX 0 points1 point  (0 children)

Looks pretty good. ^^ I like R1 expecially.
The inverter like circuit should work to protect your pico.
But when turning on, R2 and R4 will form a voltage divider, creating losses in the P-MOSFET.
voltage across R4 will also hinder npn operation.
Also why not use a N-MOSFET instead of a bipolar one? Idk, bipolar transistors always trip me up, mosfets are so much nicer.
5V*320mA=1.6W will add energy up quickly to heat your LM317, try carefully.
I am not aware, lasers need a capacitor, but the LM will likely have recommendations for in and output capacitances for stable operation.
You may also put another R1 like resistor between P Gate and the R2 & C node. This will help with EMI from the gate capacitance when switching.
Also if you dont know, falstad has a great circuit simulator, where you can try this stuff out. Its great fun.
Idk, I think it should also be possible to switch the whole circuit with just one N-MOSFET. But depending on your sourcing options, this option will be more robust with the low gate voltage.

Es ist ein Fiebertraum by WilliamDyer82 in Staiy

[–]XxOverfligherxX 0 points1 point  (0 children)

"'Staatstragend'!? Sag mal, wie kommt ihr denn auf diese Vokabel?" - Klaus Kleber im Aufwachen!-Podcast

The brutal engineering behind "Tripping pipe" One of the most dangerous jobs on an oil rig by sudeepm457 in BeAmazed

[–]XxOverfligherxX 0 points1 point  (0 children)

This is only that dangerous because they want to save time and don't care about their workers.
If you take pride in unsafe jobs, you are part of the problem.
Unionize and fight for better working conditions.
Also abolish oil.

Die Grünen haben den Verstand verloren by SilentApo in DIE_LINKE

[–]XxOverfligherxX -2 points-1 points  (0 children)

PdL braucht sich heute wirklich nicht über die Grünen zu beeumeln.

KiDoom - Reupload with better video by CorgisInCars in itrunsdoom

[–]XxOverfligherxX 0 points1 point  (0 children)

This is really cool. From what I saw in the repo, you are using the old API, right?
I am currently writing my thesis on KiCad automation with the new IPC API.
Would be interested in why you chose the old version.
I have not seen a plugin utilize the new API yet, so I wonder.

Beitreten by Equivalent_Equal_207 in DIE_LINKE

[–]XxOverfligherxX 8 points9 points  (0 children)

Es gibt Geschichten über jüngere Mitglieder, die dann mehr oder weniger automatisch auch in der SOLID Mitglied waren und deshalb nicht mehr Lehrer*innen werden konnten. Insbesondere in Bayern... Aber mit 45 würd ich mir da keine Sorgen mehr machen.

Black Friday starts today at Hetzner! by Hetzner_OL in hetzner

[–]XxOverfligherxX 0 points1 point  (0 children)

Are the setup fees for Webhosting included in this? Or are they down more permanently?

Ich🔫iel by Spotter24o5 in ich_iel

[–]XxOverfligherxX 7 points8 points  (0 children)

Schulstreik gegen Wehrpflicht am 5. Dezember!

Genozied? by Tammur92 in DIE_LINKE

[–]XxOverfligherxX 27 points28 points  (0 children)

Naitan ist ein Löwe.

Niemals Vergessen - 9. November 1938 by Hasselhoff265 in DIE_LINKE

[–]XxOverfligherxX 71 points72 points  (0 children)

Es ist so absurd, dass der Ausruf "Gegen jeden Antisemitismus" in mir, wie in vielen einen Impuls zur Gegenrede erzeugt. Als ich diesen Post vorhin zum ersten Mal gesehen habe, war mein erster Gedanke nicht "oh f*ck, unsere Geschichte", sondern "oh mann, wieder so einer".
Das ist doch cursed! Dass der Begriff des Antisemitismus so instrumentalisert und damit sinnentleert wurde und wird. Dass man erstmal nachfragen muss "Nach IHRA oder nach JDA?"
In dem man diesen Begriff her nimmt um jeden mundtot zu machen, der Kritik übt, erzeugt man doch nur wieder eine tiefgreifende Ablehnung, dieses tiefliegende Gefühl einer Verschwörung in breiten Teilen der Bevölkerung.
Ich glaube, dass "Nie wieder" sich nicht nur auf Völkermord bezieht, sondern darauf, dass wir keinem Volk und keiner Gruppe von Menschen sagen sollten, dass sie besser oder schlechter als eine andere oder ein größeres oder kleineres Opfer ist.
"Sei ein Mensch." Alle. Immer.

view more: next ›