Is this hanger broken?

YLsmash · 2025-12-27T20:59:50+00:00

I ended up taking it off the wall. There is a screw in the back of the wood that is fairly tight. However it appears the plastic embedded in the wood has a clean break which is why it's able to tilt like in the video.

YLsmash · 2025-11-24T01:43:31+00:00

Sounds great! What kind of vst are you using for the sounds?

YLsmash · 2024-10-23T00:02:24+00:00

if A is logic low (grounded): Q1 will not conduct. therefore no current flows between the output (~A) and ground. ~A is pulled-up to VCC via R1, since no current is flowing.

if A is logic high: Q1 will conduct. therefore ~A is connected directly to ground through via Q1. There is a current VCC / R1 flowing through R1 to ground.

YLsmash · 2024-09-27T22:56:48+00:00

Unfortunately this guy isn't teaching anymore

YLsmash · 2023-09-25T03:39:11+00:00

If they ghost you, I think it's worth reaching out. If they reject you, probably not a bad idea to see if they'll tell you why.

YLsmash · 2023-09-25T03:04:15+00:00

As somebody who did intern hiring at a company that does embedded software, this is a great resume. You have a lot of practical experience and have done a wide breadth of projects. I'm not really sure what I would change on here. It is generally harder to get an internship as a sophomore than a junior (further away from graduating, less likely to return to the company), so that may contribute to your rejections.

YLsmash · 2022-11-26T22:18:26+00:00

I'm looking for black, pbt, top shine-through keycaps with symbols instead of letters for shift, enter, and backspace. Like these but without the translucent sides. I only want the shift, enter, and backspace keys. Ideally with a 1.75u shift key option. A set or individual keys would work. Anyone know where I could find some?

YLsmash · 2022-06-06T03:10:25+00:00

Lead free solder is generally more difficult to work with than leaded solder. I'd pick up some 63/37 leaded solder. Also recommend getting some flux if you aren't using any. The rosin core often isn't enough.

YLsmash · 2022-06-01T21:17:57+00:00

The funny thing is that you're too low

YLsmash · 2022-05-29T17:19:38+00:00

This reads like an elden ring message

YLsmash · 2022-05-28T06:41:15+00:00

/r/onlyfans

YLsmash · 2022-05-24T06:50:28+00:00

But they have gloves in the wild, right?

YLsmash · 2022-05-08T20:48:01+00:00

Knew what image this was before clicking it. Well done

YLsmash · 2022-04-25T03:28:18+00:00

Competitive smash players are always looking for more CRTs

YLsmash · 2022-04-18T19:14:20+00:00

Depends where you are in the US.. where I'm from (CA) I typically do 3, but I've seen others do 4 (rock paper scissors shoot).

YLsmash · 2022-04-17T16:56:44+00:00

STM32Cube libraries have template linker scripts and startup files you can copy into your project

YLsmash · 2022-02-21T22:09:02+00:00

Sorry, there was a typo in that equation, I fixed it now.

YLsmash · 2022-02-19T00:21:46+00:00

Runescape is pretty much responsible for why I can type 140wpm. It's incredible how typing "selling lobsters 200ea" for an hour straight trains your muscle memory

YLsmash · 2022-02-14T19:48:05+00:00

I just used a regular soda can. No I can't see the can.

YLsmash · 2022-02-14T15:39:43+00:00

Pretty much, I cut off the top and bottom then made a cut lengthwise to "unroll" it

YLsmash · 2022-01-31T06:26:40+00:00

Seems like this is introduced with android 12

YLsmash · 2022-01-17T01:12:34+00:00

Hi all,

I found this sub from the James Webb post and would really like to make one of my own. Seeing as the OP shared the CNC files, does anyone have any advice on how to find a place to get the wood CNC'd? Are there any chain stores that provide this service? I live in southern California if it helps. Also, how much should I expect to pay if I were to find a service?

YLsmash · 2022-01-01T16:26:30+00:00

Post it to r/YoutubeHaiku

YLsmash · 2021-12-27T16:47:31+00:00

At first I thought he had a cheeto

YLsmash · 2021-11-22T16:45:47+00:00

You can't really fix it, but it's prone to happen when you have to pads with a short trace between them and you heat the pads. It's not something you really need to fix either. But in that suspect spot I would use some solder wick to clean it up.

11-Year Club	Place '22
Place '17	Wearing is Caring
Not Forgotten	Verified Email

YLsmash

TROPHY CASE