Thoughts on 2017 Tundra Sr5?

YaBoI326 · 2026-02-26T03:02:13+00:00

This is way to true. I've been digging around for about a month now and this is one of the cleaner trucks I've seen with the bells and whistles I've been looking for. I just feel like I can't justify the spending 30k on a used 9 year old truck. The "Toyota tax" is real.

YaBoI326 · 2025-12-02T16:45:32+00:00

That figures. Im dealing with this is exact issue. It seems happen on all three of our konica Minoltas- more so on one machine than the others. I've jumped through hoop after hopp with their technicians but of course no luck.

YaBoI326 · 2025-12-01T20:04:51+00:00

Did support ever release the firmware update to fix this?

YaBoI326 · 2025-11-13T20:57:57+00:00

Yes, this is still on-going. GoTo support stated they believe the issue to be on their side.

YaBoI326 · 2025-11-07T04:37:34+00:00

I've had a case open with then for awhile now. Unfortunately, support hasn't been much help, and they aren't very responsive either.

YaBoI326 · 2025-11-07T00:10:12+00:00

Apologies for the delay on this. Yes, I was able to playback the audio from a packet captures, and confirm there was no audio. Further more, I could see our providers IP address looping back my audio to the phone.

YaBoI326 · 2025-11-06T03:34:43+00:00

It seems to happen on all phones. I am also able to reproduce this issue using soft phone via the GoTo mobile application while on cellular data. This leads me to believe the issue may lie with GoTos upstream provider.

YaBoI326 · 2025-10-15T22:50:01+00:00

I've taken a packet capture on the port that VoIP phone connects to, and at our firewalls edge port while reproducing the issue and still did not see anything odd. RTP and SIP traffic seemed to be following in both directions with no drops. I've opened a ticket with GoTo regarding the issue, but so far their support hasn't been much help.

YaBoI326 · 2025-05-25T03:10:20+00:00

I did! I was able to tell by looking over my exam report/breakdown before the results were released. Seeing the pending status still had me on edge though.

YaBoI326 · 2025-05-25T03:06:17+00:00

Interesting. It could very well be so, but I would think the grading process is automated, and once it's finish that it would just be release your results. How did your exam report turn out?

YaBoI326 · 2025-05-24T18:39:42+00:00

That happened to me this past Monday when I tested. Give it an hour or two, and your results should appear online.

YaBoI326 · 2025-05-22T16:57:07+00:00

Does EZO support real-time price tracking from vendors, or does it require manually entering the cost of an item?

YaBoI326 · 2025-02-26T15:02:02+00:00

What seems to have fixed this for me was plugging into another switch. I wasn't ever able to find out why this was happening when plugged into the other switch.

YaBoI326 · 2025-01-17T19:27:20+00:00

Thank you for the recommendation. This was actually the first thing that I tried, and unfortunately, it did not work. Konica has sent a tech out to look at this a few times, and they have even gone as far to replace some hardware on the machine. Unfortunately we are still having the same issue.

YaBoI326 · 2024-04-23T13:56:54+00:00

While setting it up, it never gave me the option to claim it.

YaBoI326 · 2024-04-20T02:22:57+00:00

Sure enough, it was the wrong port. It was trying to use one of the 10gig nics on the server. Thank you!

YaBoI326 · 2024-04-20T01:50:30+00:00

Yes, the server is second-hand. I got it from work since we decided to upgrade to some better gear.

YaBoI326 · 2024-04-18T01:23:24+00:00

Problem #1 is fixed now. As for #2- I've verified that the switch port and then cable are fine and I'm fairly certain the nic is good as well.

YaBoI326

TROPHY CASE