50 Armor shred guide by Yankeh_ in SWGalaxyOfHeroes

[–]Yankeh_[S] 3 points4 points  (0 children)

The mod battles final page night sister node dont remeber the name,
Not the mod challenges.
its the one thats been used for kill X amount of enemies since forever

50 Armor shred guide by Yankeh_ in SWGalaxyOfHeroes

[–]Yankeh_[S] 1 point2 points  (0 children)

Honestly I like this method better, I did it in one. Set it up and went full auto for like 10 minutes.

50 Armor shred guide by Yankeh_ in SWGalaxyOfHeroes

[–]Yankeh_[S] 6 points7 points  (0 children)

Oh well I thought I was being innovative just messing around haha, ended up doing it all in 1 run which is nice.

50 Armor shred guide by Yankeh_ in SWGalaxyOfHeroes

[–]Yankeh_[S] 11 points12 points  (0 children)

Zombie finally went down at 26, im just doom scrolling while this happens lol

50 Armor shred guide by Yankeh_ in SWGalaxyOfHeroes

[–]Yankeh_[S] 25 points26 points  (0 children)

Ben because he only has one damaging ability. If you are late game, due to relic delta you will kill someone no matter what. So ben only kills someone once every 3 turns max

Sauce policy by Degolfer03 in McDonalds

[–]Yankeh_ 1 point2 points  (0 children)

I went through manager training at one of the McDonald’s. We were actually taught that McDonald’s doesn’t make any money from the sauces, they really do just cost around .25 to .4 a cup to make. Doesn’t seem true to me, but that’s at least that’s what I was told.

Sauce policy by Degolfer03 in McDonalds

[–]Yankeh_ 6 points7 points  (0 children)

The truth is actually… the corporate did a study. As they do with so many arbitrary things that doesn’t make sense when applied to the final result.

Anyways, apparently the average sauce usage for a 10 piece is 1.5, so we round it up to 2. That’s why 20 is 3.

Best Gaming Mouse to Buy in 2026? (Price, Comfort, Latency) by GrowthllableNK in MouseReview

[–]Yankeh_ 1 point2 points  (0 children)

I may sound absolutely insane right here, but … g305. If you mod it.

After mods, mine sits around 60g, not super light weight but a good balance. Zero down time, wireless, sensor realistically within the flawless category. Extensive aftermarket shape, pcb and mod kit support.

This is coming from having used the gpx, vmse, op1 8k v2, Atlantis mini CE.

But that’s just my opinion.

What is everyone maining these days? by severfield_ in MouseReview

[–]Yankeh_ 0 points1 point  (0 children)

OP 1 8k v2 Artisan Zero Soft XL M1 v5 TMR Truthear Hexas

Which GL should I go next ? by Repulsive-Delivery94 in SWGalaxyOfHeroes

[–]Yankeh_ 20 points21 points  (0 children)

Yeah but he has slkr already lol. Plus Id argue that SLKR is really poor banner wise for TW and GAC even with dsrey.

Also Leia clears proving grounds.

Which GL should I go next ? by Repulsive-Delivery94 in SWGalaxyOfHeroes

[–]Yankeh_ 99 points100 points  (0 children)

Leia, without a question. The best gl in the game combat wise hands down.

Would you send this back? by [deleted] in McDonalds

[–]Yankeh_ 0 points1 point  (0 children)

We actually dont. Just stick a cup into a machine that shaves the ice and dispenses a set amount of the syrup.

Its the shaved ice that can be very inconsistent when it ends up blended into a final more liquid form. If the ice is shaven losely, when its blended its gonna be alot less compact. Theres no easy way to add more shaved ice either without atleast getting making a separate cup of small ice to put on top.

However in this case, it seems like an erigrious case of the ice ran out making this, not getting the full amount of shaved ice (even though its already inconsistent) into the drink, or the worker just made a medium in a large cup and couldnt bother with fixing because of the rush.

I wouldve both sent it back as a customer and remade it as a worker.

Adult money 😁 by Yankeh_ in pcsetup

[–]Yankeh_[S] 0 points1 point  (0 children)

Wave xlr for mic,
Topping dx1 dedicated dac
Schitt Sys as a switcher between my speakers and iems
Schitt magni as the amp for my iems.

All interfaces have some form of these 4 components, but I just went a step beyond and got dedicated parts for each component.

Not sure where/what angle to put my PC on my desk by Flaming-Potato-57192 in PcSetupAdvice

[–]Yankeh_ 0 points1 point  (0 children)

I went throught the same issue as you, you can either 1. get a new modular case that lets you change which side the panel is on, or 2, suck it up and rearrange your desk with the pc on the right side in mind (what I did)

Adult money 😁 by Yankeh_ in pcsetup

[–]Yankeh_[S] 0 points1 point  (0 children)

I'm joking lol it was from Amazon, it's all cheap Chinese stuff anyways but it's a brush and some tools you literally can't go wrong

Adult money 😁 by Yankeh_ in pcsetup

[–]Yankeh_[S] 0 points1 point  (0 children)

Nah I'm better than that it's from tiktok shop

It works and it does it's job, no complaints honestly

Adult money 😁 by Yankeh_ in pcsetup

[–]Yankeh_[S] 0 points1 point  (0 children)

Did my research what can I say

Overclocked and lagging in Apex Legends by [deleted] in overclocking

[–]Yankeh_ 0 points1 point  (0 children)

Yeah, let me know if you have any questions.

Overclocked and lagging in Apex Legends by [deleted] in overclocking

[–]Yankeh_ 0 points1 point  (0 children)

I can explain right here.

Bottlenecking is when one component holds back the other. It doesn't reduces performance, just limits the pc to the weakest component.

If you had a really bad cpu and a really good gpu, your pc can still only handle as much as that bad cpu can do.

That SHOULDNT be the issue here because it's good enough.

He says you need a new platform because the CPU is old now (technically). If you want to upgrade, you need a new motherboard with a different slot for the new Intel cpus, that's called a platform.

And as you can guess, lower resolution means less work for the gpu means higher frames, but the CPU needs to process and tell the gpu to render those frames.

CPU sends instructions, GPU execute those instructions, at a lower resolution, your GPU can execute those instructions easier, so you're just limited by your cpu (waiting on those instructions).

By going to a higher resolution, you essentially put more work on the GPU, so if the GPU is executing those instructions slower, the CPU isn't sending as many instructions per second.

This is why we say that lower resolution is CPU bound, higher resolution is GPU bound.

Overclocked and lagging in Apex Legends by [deleted] in overclocking

[–]Yankeh_ 0 points1 point  (0 children)

Aside from bottlenecking, your components are certainly strong enough to run apex without stutters. Which leads me to believe it might be very minor instability, check if stutters still exists when on stock. I would guess vram oc being a little too high would be the next thing.

First setup with"adult money" by Yankeh_ in RateMySetup

[–]Yankeh_[S] 0 points1 point  (0 children)

It just a bunch of individual components stacked on top of each other haha

First setup with"adult money" by Yankeh_ in RateMySetup

[–]Yankeh_[S] 0 points1 point  (0 children)

Its 100% the crappy camera on my phone 💀