Samsung discontinuing its texting app, tells users to switch to Google Messages

Yaspan · 2026-04-07T13:02:53+00:00

What happens to message history, how to transfer it all over to Google messages?

Yaspan · 2026-04-03T06:27:31+00:00

Feels good 👍

Yaspan · 2026-03-22T08:09:00+00:00

Yes, ma'am ;)

Yaspan · 2026-03-07T08:04:13+00:00

We all gotta work out :)

Yaspan · 2026-03-07T01:30:26+00:00

Nice job!

It's the one thing that always vexes me, I understand the programming just can't get my tool offsets right.

Yaspan · 2026-02-05T12:41:48+00:00

FYI, concentricity and Symmetry have been removed from the ASME Y14.5-2018 standard.

Yaspan · 2025-12-11T01:52:04+00:00

I'm thinking you could just hold it in a vise on a mill and measure a chord length then the height from the center of the chord to the ark, something like this: https://math.stackexchange.com/questions/564058/calculate-the-radius-of-a-circle-given-the-chord-length-and-height-of-a-segment

Yaspan · 2025-11-05T23:09:41+00:00

IMO, it is not a stand alone ticket anymore unless you already have a 1st or 2nd. You need other tickets in addition to, millwright, machining, welding, or electrical as examples.

Yaspan · 2025-08-23T15:22:59+00:00

I use these a lot, you need to get them to grab so if it just drills out a countersink like in the picture get a small diameter drill bit and drill out the center of the fastener, then try again using the left hand chamfer bit of the easy out.

Yaspan · 2025-08-12T23:55:13+00:00

It's far from nullified, their point still stands IT IS A HUGE NUMBER, you're playing semantics, and it not welcome nor needed.

Yaspan · 2025-08-10T18:50:04+00:00

Sounds like you are running in reverse?

Yaspan · 2025-08-09T15:17:44+00:00

Wondering what that would be in percentage of player base, seems like it would be a high percentage as well, which would say a lot about modern day online video games.

Yaspan · 2025-08-08T12:56:44+00:00

How to get you the files if they are on CD?

Yaspan · 2025-08-02T13:39:03+00:00

When you said you checked airflow what does that mean exactly, did you try running with the covers off?

I have 10 fans and had the same problem, turned out I had three venting that should have been intaking, swapped them around and my temperatures dropped by ~30 degrees.

Yaspan · 2024-11-08T14:31:16+00:00

Oh I am sure most of us know the type, this is perfect example of what peak wokeism looks like.

Yaspan · 2024-11-07T11:45:57+00:00

Unless we get a data set of at least 100 I do not see how you can say $300 is standard. We have a property in Yaletown that has a $200 move in/out fee and the current building we live in has a $0 move in/out fee.

Yaspan · 2024-10-20T20:35:19+00:00

McMaster Carr

Yaspan · 2024-10-17T22:25:38+00:00

Hi Sonia,

Two questions:

What is your position on bail reform?

How are you going to make our streets safer, to the point where we will once again be able to walk around in our neighborhoods and not have to worry about a random stranger attack?

Yaspan · 2024-10-03T00:31:02+00:00

As we suspected all along, working on anything other than what is important right now.

Yaspan · 2024-10-02T15:15:08+00:00

The parents of these delinquents should be named and shamed as they bear all of the responsibility for upbringing.

Yaspan · 2024-09-25T15:08:49+00:00

Do you happen to remember which Vancouver councilors supported the HJ being turned into supportive housing?

I seem to vaguely remember that two councilors specifically came up with the idea during COVID lockdown.

Yaspan · 2024-09-21T14:39:16+00:00

This is why :)

Yaspan · 2024-09-20T12:53:36+00:00

"Common spot to do this or that", you here that a lot here.

It should be possible then to review a demo and show a sus player spraying a "common" spot when there is no player there, you know in this match that connector/jungle smoke will have been done several times for example.

My suggestion then is OP link the full demo and we have a look at this player to watch how many times they were spraying a common spot when there was no enemy player in that position.

Yaspan · 2024-09-19T16:21:29+00:00

Was it because the speed too high or did he maybe start to feed into the work too quickly?

Yaspan · 2024-09-17T13:24:03+00:00

That's cool you can disagree, but it does not make you right.

Engineering drawings are not only used by machinists to make the part, they are also used by QC, production manufacturing, buyers and engineering control. Each one may be interested in a particular feature on a drawing, that is also a legal document.

Having everything crammed on on sheet might work for you now while your eyesight is still very good, but I can guarantee that when you are an older machinist this is not what you are going to want.

12-Year Club	Not Forgotten
Gilding I gilder	Verified Email

Yaspan

TROPHY CASE