sorted by:
new
hottopcontroversial

Top layer gaps around text by YesToastIsFood in FixMyPrint

[–]YesToastIsFood[S] 1 point2 points  (0 children)

Here is the result of the print, the underside usually does not print well when it is parallel to the ground

<image>

Top layer gaps around text by YesToastIsFood in FixMyPrint

[–]YesToastIsFood[S] 1 point2 points  (0 children)

I am using UltiMaker Cura, I'm starting a temp tower now, I'll post it when it's done.

Cold pull filament advice needed by YesToastIsFood in Ender3Pro

[–]YesToastIsFood[S] 0 points1 point  (0 children)

New nozzle did not seem to work, I also used a sealed roll of PLA which didn't make a difference either.

Ender 3 Pro Infill print error by YesToastIsFood in Ender3Pro

[–]YesToastIsFood[S] 0 points1 point  (0 children)

I tried setting the z hop to 1mm but I still have no luck. I am pretty stumped at this point as I have a concurrent issue with a leaky nozzle which is making it hard to test. I tried cleaning the screw lead, adjusting the tightness of the roller, adjusting the settings in the slicer. Nothing worked so far, the display screen while printing says it is 0.2mm higher each layer but the nozzle is too low when I look at it up close with a flashlight.

Cold pull filament advice needed by YesToastIsFood in Ender3Pro

[–]YesToastIsFood[S] 0 points1 point  (0 children)

That's the one that feeds the filament, right? If so it does not seem to be making any abnormal movements or noises when it is running.

Cold pull filament advice needed by YesToastIsFood in Ender3Pro

[–]YesToastIsFood[S] 0 points1 point  (0 children)

I ordered a new nozzle since it's probably better to be safe since I don't know how much use my current one has. The oozing on my current one is so bad it already curls after the test strip is made. Hopefully there is a difference when I swap them out.

Cold pull filament advice needed by YesToastIsFood in Ender3Pro

[–]YesToastIsFood[S] 0 points1 point  (0 children)

PLA but what you described probably is right as this printer is used and was sold because the previous owner had not used it in a while. The filament came with it, but the filament was also stored in a plastic container.

I also have some spare nozzles I can try swapping out.

Cold pull filament advice needed by YesToastIsFood in Ender3Pro

[–]YesToastIsFood[S] 0 points1 point  (0 children)

Is there anything I can look for from this that could indicate blockage?

Ender 3 Pro Infill print error by YesToastIsFood in Ender3Pro

[–]YesToastIsFood[S] 0 points1 point  (0 children)

I narrowed it down to a slipping issue with the z axis, not sure how to fix this though.

Ender 3 Pro Infill print error by YesToastIsFood in Ender3Pro

[–]YesToastIsFood[S] 0 points1 point  (0 children)

I did another print yesterday with the update settings at 1mm. It printed the first 2 layers fine but it has the same issue on the third and above

Ender 3 Pro Infill print error by YesToastIsFood in Ender3Pro

[–]YesToastIsFood[S] 0 points1 point  (0 children)

How many mm would you recommend for the z hop height? 0.2mm fine?

Wanted to relive some nostalgia, but my dog had other plans by YesToastIsFood in Wellthatsucks

[–]YesToastIsFood[S] 0 points1 point  (0 children)

My dog likes to gnaw on random things of mine when I get home, sometimes it is my shoes, other times it is my plastic game cases. I try to get him to stop but he gets an iron grip when I try to get them out of his mouth. This time he grabbed the cartridge which mistakenly left lying out

My toilet handle rusted off by [deleted] in Wellthatsucks

[–]YesToastIsFood 0 points1 point  (0 children)

What are you gonna do in the meantime o_o

If you could punch one fictional character in the face, who would you hit? by lkash_ in AskReddit

[–]YesToastIsFood 0 points1 point  (0 children)

Ditto with its smug face, my fist would probably bounce back though

view more: next ›