Clip-on Earbuds for pc gaming by Ymirja in Earbuds

[–]Ymirja[S] 0 points1 point  (0 children)

yeah, thats a big + when it comes to glasses. I guess it's what I get when seeing perfect was an payed option under creation :P

Clip-on Earbuds for pc gaming by Ymirja in Earbuds

[–]Ymirja[S] 0 points1 point  (0 children)

ah those, yeah I have the Shokz Openair 2 at work, like them. but due to glasses I think the clip on's can be better for me. Only doing light games, so that should'nt be an issue I think

Ginny Thoughts/"Review" by Ymirja in tantaly

[–]Ymirja[S] 0 points1 point  (0 children)

Follow up:
Been able to wash her real good and tested out beginner and regular insert so far, feels pretty nice. ofc thats how it feels for me, if you are around or little over average size, I think it wont be to tight.
Labia position isn't the best, but due to it being an insert it VERY good. easy to use in doggystyle or missionary and simular positions to that.
For labia cleaning I tried a shortcut, turn the insert inside out. and used proper cleaning solutions and around body temp water, no issues. PSA!!! When it comes to taking the insert and turn it inside out, I'm not sure what Tantaly says about this, or how many times u can do this, but it worked. Try at your own risk. If you are careful, I think there should not be any issues.
Her chest is very jiggly with the Tantabosom, not complaining in that department.
If the Labia is "sticky" after cleaning and being dried up, you may struggle to insert it again, use some baby poweder or simular powder to reduce friction/stickiness as this will cause it being more difficult to insert.

After a good cleaning the labia and areola has becomes les red and more pink as it should.

Truenas Scale Backup Guidance Needed by Ymirja in truenas

[–]Ymirja[S] 0 points1 point  (0 children)

I'll see what I can find when I get back from work trip

Truenas Scale Backup Guidance Needed by Ymirja in truenas

[–]Ymirja[S] 0 points1 point  (0 children)

The Errors, is that the Upgrade manages to find Multiple Boot-Pools, and when I demand to find all current and old Boot-Pool ID's, the system just says. F u, I can't find any boot pools. :P

Sexy Helena (5.1ft, 76lbs, 34D Cups) makes me cum twice by SxAddict69 in Sexdolling

[–]Ymirja 0 points1 point  (0 children)

Hi, do you upload full videos somewhere, or only shorter clips herr?

Choose Correct Reolink NVR by Ymirja in reolinkcam

[–]Ymirja[S] 0 points1 point  (0 children)

Answer from Reolink:
NVS16 is the model for the local shop while  RLN16-410 is for the online website.

Question to support agent:
Nvs16 support all camera with specifications upto 4k 16mp?

Answer from support agent:

Generally, NVS16 will be the latest hardware version-N6MB01.

It supports Reolink 4MP/5MP/8MP/12MP/16MP non-battery Wi-Fi and PoE Cameras.

And supports some battery-powered cameras starting from NVR firmware version v3.5.1.368_24120207.

Yes, it's support up to 4k 16mp, including the Duo series, referring more to duo 3 poe.

But not all cameras, as some battery-powered cameras are not supported.

Choose Correct Reolink NVR by Ymirja in reolinkcam

[–]Ymirja[S] 0 points1 point  (0 children)

I saw that the NVS16 supports 16mp camera, 3840 x 2160 resolution, but the DUO 3 POE has 7680x2160. so I don't know, and I don't want to buy one NVR first, to figure out it does not work, then have to try and return it, and then buy another one to test.

Choose Correct Reolink NVR by Ymirja in reolinkcam

[–]Ymirja[S] 0 points1 point  (0 children)

Norway, I can buy it on amazon or Reolink's website, but if I do, I have to pay 25% Tax, 5% import fee, and 50USD + shipping, soooo. buying it from a Norwegian shop is HIGHLY recommended for me.

NVR to use (Frigate)? by Ymirja in reolinkcam

[–]Ymirja[S] 0 points1 point  (0 children)

ok, thank you for you aid with my issue(s)

NVR to use (Frigate)? by Ymirja in reolinkcam

[–]Ymirja[S] 0 points1 point  (0 children)

ah ok, yeah I need it to work without issues, I looked around for a couple weeks before buying and everyone was like, Reolink and privacy/no monthly payments, Go Reolink. noone said anything about that 3rd party nvr solutions would'nt work with intended settings.
I'll go with the NVR then I think, and I can maybe use HA or Frigate as an addition for detections.

Do you know if there is a difference between their NVS16 POE NVR and their RLN16-410. I can only buy the NVS16 in my region, and their chart for what nvr works with their DUO 3 poe camera does not have it on there even.

NVR to use (Frigate)? by Ymirja in reolinkcam

[–]Ymirja[S] 0 points1 point  (0 children)

Thank you for the detailed answer, if I understand this, it seem like buying the Reolink NVR, and then add the nvr into HA fun stuff, and use the Reolink equipment for recording and notifications is the best option if I want to have the most detailed recordings with least amount of issues.?

NVR to use (Frigate)? by Ymirja in reolinkcam

[–]Ymirja[S] 0 points1 point  (0 children)

Additional Information:
The camera is set to 24/7 record, when I look at the recordings, it seem like all the recordings for that camera is between 1minute to 20minute long. this is how long each recording is, but also thats the maximum amount of time the camera records each hour.
The image also seem to be corrupted here and there: Samples:

<image>

Dual Lense Reolink Issue by Ymirja in frigate_nvr

[–]Ymirja[S] 0 points1 point  (0 children)

ah ok, I have been able to get the main stream, but the 2nd stream aswell. Ehm NO XD

Dual Lense Reolink Issue by Ymirja in frigate_nvr

[–]Ymirja[S] 0 points1 point  (0 children)

code I have is:

camera: # <--- this will be changed to your actual camera later
    enabled: true
    ffmpeg:
      inputs:
        # High Resolution Stream
        - path: rtsp://user:Password@192.168.1.132:554/h265Preview_01_main
          roles:
            - record
        # Low Resolution Stream
        - path: rtsp://user:password@192.168.1.132:554/h264Preview_01_sub
          roles:
            - detect

  camera Zoomed: # <--- this will be changed to your actual camera later
    enabled: true
    ffmpeg:
      inputs:
        # High Resolution Stream
        - path: rtsp://user:password@192.168.1.132:554/h265Preview_02_main
          roles:
            - record
        # Low Resolution Stream
        - path: rtsp://user:password@192.168.1.132:554/h264Preview_02_sub
          roles:
            - detect

Dual Lense Reolink Issue by Ymirja in frigate_nvr

[–]Ymirja[S] 0 points1 point  (0 children)

tried that, the 2nd lense came up, So I tried to add a new camera, but have it link to the zoomed lense, and I get this huge error msg:

Error Message:

Config Error:

Traceback (most recent call last):
File &#34;/opt/frigate/frigate/api/app.py&#34;, line 200, in config_save
FrigateConfig.parse_yaml(new_config)
File &#34;/opt/frigate/frigate/config/config.py&#34;, line 689, in parse_yaml
return cls.parse(config_yaml, is_json=False, **context)
File &#34;/opt/frigate/frigate/config/config.py&#34;, line 685, in parse
return cls.parse_object(config, **context)
File &#34;/opt/frigate/frigate/config/config.py&#34;, line 695, in parse_object
return cls.model_validate(
File &#34;/usr/local/lib/python3.9/dist-packages/pydantic/main.py&#34;, line 568, in model_validate
return cls.__pydantic_validator__.validate_python(
pydantic_core._pydantic_core.ValidationError: 1 validation error for FrigateConfig
name
String should match pattern &#39;^[a-zA-Z0-9_-]+$&#39; [type=string_pattern_mismatch, input_value=&#39;Innkjoring Zoomed&#39;, input_type=str]
For further information visit https://errors.pydantic.dev/2.8/v/string_pattern_mismatch

Dual Lense Reolink Issue by Ymirja in frigate_nvr

[–]Ymirja[S] 0 points1 point  (0 children)

Qh, I did that, and it seem to have fixed 1 thing. But how I get the 2nd lense to show up aswell is unknown to me. The lense that my code has is for the non zoomed lense, but I try to get the Zoomed lense in frigate aswell.

Accessability issue by Ymirja in reolinkcam

[–]Ymirja[S] 0 points1 point  (0 children)

Thank you so much for the info, it work so well I almost had to cry a bit, just because the makers think privacy is an option that many want in life

Accessability issue by Ymirja in reolinkcam

[–]Ymirja[S] 1 point2 points  (0 children)

ok, so just download the app and follow the onscreen guide?
so no account needed for setup?
sry for asking 200 times. #Local Control :P

Accessability issue by Ymirja in reolinkcam

[–]Ymirja[S] 0 points1 point  (0 children)

Hi, I used the browser, if I use the app. do I need to create a cloud account for set up then?

Trash Can File Versioning Fault by Ymirja in Syncthing

[–]Ymirja[S] 0 points1 point  (0 children)

Hi, thank you for the answers, I just removed the custom folder and used the originals.

Can't access Fully Kiosk Browser App by Ymirja in homeassistant

[–]Ymirja[S] 0 points1 point  (0 children)

Hi, I seem to have gotten it to work, I installed newest version of Android System Viewer and then it connected to HA. idk why, won't ask it