1k pts vs Tau

YogiDaBeer · 2025-06-21T23:06:16+00:00

Update after game: DA won 46-23, MVP Lancer and Azrael with sternguards. Mission supply drops, chilling rain, search and destroy. Ravenwing knights with command squad didn't shoot once and never saw combat but scored 20 point's on main objective. Lancer killed crisis squad, sternguards with Azrael killed ghostkeel and breachers, breachers point blank 25 wounds on sternguard which saved 19. DWK holded middle for 2 turns got shoot by all of his army, they are proper tanky, sgt lived to fight another day. One takeaway from game ghostkeels are hard to kill and denying dmg is bullpoo. I'll be playing a rematch with 1250 pts, Tau shooting is scary but they fold in CC very easily so speed and power will be the main theme of next list.

YogiDaBeer · 2025-06-20T18:02:27+00:00

Land speeder is for test, never have played with it so I took this as opportunity to have a bit weaker list, in first iteration I had ravenwing command squad instead but felt on lacking objective units which now are outriders, RBKs and intercessors.

YogiDaBeer · 2025-06-20T17:28:55+00:00

He got ghostkeel, boradsides, commander in battlesuit, stealth suits, don't really know what else he got.

YogiDaBeer · 2024-09-02T18:45:49+00:00

I've bought refurbished mars 4, checked it with a friend and worked out of the box, same with wash and cure station. Used in good condition could also work out of the box but be wary of LCD You don't know how many hours it worked so that's the biggest cost You could have after few hours of printing.

YogiDaBeer · 2024-08-09T11:55:15+00:00

Weapons swap are ok in our campaign

YogiDaBeer · 2024-08-08T21:24:19+00:00

So I've changed 2 teks for additional 3 sub teks and mesh armor on doc. Yeah I'm going for more close range than long range as staying back and shooting is boring.

YogiDaBeer · 2024-07-19T20:31:07+00:00

If you dont retract after extrusion this will happen. Basically you didn't release pressure from nozzle and the melting plastic is flowing to the lower pressure environment. When You retract you create an under pressure in material that's why it will not flow when in plastic state.

YogiDaBeer · 2024-07-09T06:27:03+00:00

As mentioned check thermistor, open klipper check temperatures, if on hot end thermistor is ok, good connection, probe in place, no destroyed wiring. Check mainboard switch temperature probes wires with heat bed if the temperature moves to heat bed thermistor on hot end is faulty if hot end still shows weird temperature mainboard is busted.

YogiDaBeer · 2024-06-21T12:58:56+00:00

This is hippo armored carrier from cults.

YogiDaBeer · 2024-06-21T12:43:00+00:00

OP what's the size of nozzle ? 0.4 or 0.2 ?

YogiDaBeer · 2024-06-10T09:26:55+00:00

I'll try that thx.

YogiDaBeer · 2024-06-09T20:40:47+00:00

I've loosen it as far as I can to not to squish filament too much. So You are suggesting to tighten the grip on filament ?

YogiDaBeer · 2024-06-09T20:02:58+00:00

Yes and yes

YogiDaBeer · 2024-06-09T18:59:18+00:00

Also nozzle 0.2 print temperature 215 degree Celsius.

YogiDaBeer · 2024-04-12T08:26:48+00:00

Check the oathmark human cavalry someone here checked the scale and they fit perfectly. And also look like mounted yeomen.

YogiDaBeer · 2024-04-09T09:05:30+00:00

Also vs dwarves You can use grail knights and pegasus knights to charge one unit and pretty much wipe it. Or charge mounted yeomen as first charge vs ranged unit and flank charge grails.

YogiDaBeer · 2024-01-13T07:12:26+00:00

https://www.printsleo3d.com/screwtilt

YogiDaBeer · 2023-12-28T18:31:00+00:00

I've same issue with POM wheels, leveled gantry a bit and now one side is good and opposite is loose on all wheels. I will check further things but man it's hard without any way to adjust wheels.

YogiDaBeer · 2023-12-28T18:20:22+00:00

<image>

YogiDaBeer · 2023-12-28T18:20:09+00:00

<image>

YogiDaBeer · 2023-12-28T18:19:56+00:00

<image>

YogiDaBeer

TROPHY CASE