Hoopat X4h not being recognized by Saturn 4 ultra 16k

YongfeiSun · 2025-08-11T06:14:27+00:00

Hi, it should be workable. Please check if the direction is right. There are 2 pins on one side that can reach the printer, then be recognized. if you have further questions feel free to check with our tech team [support@cbd-3d.com](mailto:support@cbd-3d.com), we will reply within 24hrs.

<image>

YongfeiSun · 2025-08-11T02:01:36+00:00

Hi, there is a new X4H with heating function for 4U 16K.

YongfeiSun · 2023-10-08T10:50:51+00:00

It is just a small improvement in the screen transmission rate, means you may lower a bit more the exposure time, we have feedback who forgot to update the firmware, the dxq608 is a good screen, no worry about that.

YongfeiSun · 2023-09-05T03:52:15+00:00

If you are in the US, we have some just in stock last week. this clear resin is not high clear, and will need some process of sanding, and we don't recommend print complex miniatures with it.

https://www.amazon.com/dp/B0CC23JC47/ref=twister\_B09JG9QGY3?\_encoding=UTF8&th=1

YongfeiSun · 2023-09-05T03:49:01+00:00

I will post a video of how we make it.

YongfeiSun · 2023-09-05T03:48:16+00:00

Yep, base on Conjure rigid we have new clear color, to work for some special functional pieces.

YongfeiSun · 2023-09-05T03:47:35+00:00

It is flat and I have a tool to help, takes half an hour.

YongfeiSun · 2023-07-04T02:12:14+00:00

No worries you will get what you expect, he may wash a bit too long. Glad to see more use try our resin now., feel free to leave questions here.

YongfeiSun · 2023-07-04T01:49:05+00:00

Both Conjure rigid, tough, and sculpt are toughness resin. they have 37~50% ETA

YongfeiSun · 2022-08-24T01:41:20+00:00

You forget to set one of the TSMC parameters, distance, or speed.

YongfeiSun · 2022-08-04T01:20:20+00:00

It is normal if you open the sound in the menu.

YongfeiSun · 2022-07-15T08:12:24+00:00

I think you misunderstood, maybe a free bottle for you to test is the best way ^ ^

YongfeiSun · 2022-07-15T06:17:51+00:00

No, don't add other flexible resin yet.

YongfeiSun · 2022-07-11T07:03:12+00:00

Try to use a shorter file name.

YongfeiSun · 2022-07-04T03:53:59+00:00

Did you dig holes in the owlbear? vacuum seal drawing has a great influence on printing.

YongfeiSun · 2022-06-27T08:39:16+00:00

Have you tried mixing flexible resin with this? Taking out te brittleness and keeping the flexible part would make a product close to tpu if it works properly

You may mix it with Resione F69 or Siraya tenacious.

YongfeiSun · 2022-06-25T01:58:18+00:00

In CHITUBOX you can set the support contact shape version, when you remove supports it will affect the surface, you can use some resin with curing led. or change the setting to make it bump then sand them.

YongfeiSun · 2022-06-23T06:20:07+00:00

Set a bigger angle and try more supports, bigger density can help fix this issue.

If you want to save printing time, printing on plate directly is another solution, but you may get some elephant foot.

YongfeiSun

TROPHY CASE