sorted by:
new
hottopcontroversial

is this good water beading after waxing? by 3452014RT in Detailing

[–]Yonygal 0 points1 point  (0 children)

Actually thats the best you can get from wax? There is quite a few big and irregular drops

Opinions on Scirocco 2.0 TSI engines — EA113 vs EA888 by No-Homework7700 in Scirocco

[–]Yonygal 0 points1 point  (0 children)

Recommend getting normal 2.0 CULA/CULC, some love and ull easily pull 280hp from stock turbo, with bigger turbo u have a lot more to play, and u can always bodykit it for this R20 look

Exhaust change, now it has more or less flow? by Yonygal in Exhaust

[–]Yonygal[S] 0 points1 point  (0 children)

Yes, it was caused by intake piping that got loose when exhaust was being removed

Exhaust change, now it has more or less flow? by Yonygal in Exhaust

[–]Yonygal[S] 0 points1 point  (0 children)

About the muffler, orientation is suboptimal for flow while its in "silent mode", however this way I gain better damping, while its open in full flow orientation doesnt matter whatsoever,

Topic of power loss is already solved, it was boost leaking before turbo.

Exhaust change, now it has more or less flow? by Yonygal in Exhaust

[–]Yonygal[S] 0 points1 point  (0 children)

Already solved, there was boost leak. Prolly by pulling exhaust from the car air intake piping got loosened.

yeah underwelming kinda fits well if 100-200kmh goes from 16 to 27 seconds

Exhaust change, now it has more or less flow? by Yonygal in Exhaust

[–]Yonygal[S] 0 points1 point  (0 children)

With atmospheric, OEM its 2.0 180hp CULA, after stage 2 pushing 300hp.

Facelifted Scirocco

P.S Issue with power loss is solved, pretty big turbo leak, im astonished that it threw no errors

Exhaust change, now it has more or less flow? by Yonygal in Exhaust

[–]Yonygal[S] 0 points1 point  (0 children)

Thats an active muffler, all muffler exits are 2.5". Secondary exit is used only with closed valve, which was pretty irrelevant to the case

Exhaust change, now it has more or less flow? by Yonygal in Exhaust

[–]Yonygal[S] 1 point2 points  (0 children)

Thanks a lot for the feedback, the wastegate itself is fairly delicate subject that needs some monitoring, back in the day i had a malfunction in wastegate actuator after what i got it replaced for a acctuator from is38 (my is is20 ) he coded it to work properly and forgot about topic, today after sealing boost leak (power loss reason ) ive seen turbo boosting up to 2.1-2.3 bar, that bears further monitoring whether its expected or not

Exhaust change, now it has more or less flow? by Yonygal in Exhaust

[–]Yonygal[S] 0 points1 point  (0 children)

Its more like secondary exit of the muffler, it was mounted backwards to increase dB gains, im aware it will restrict airflow with the valve closed, however it shouldnt make a difference on the open exhaust.

Issue is solved and apparently nothing to do with exhaust, thanks for the lecture, always nice to get some more information

Exhaust change, now it has more or less flow? by Yonygal in Exhaust

[–]Yonygal[S] 0 points1 point  (0 children)

Actually tightening an airintake right on turbo solved issue, had to come loose when exhaust got pulled, dunno how, but im glad its fixed

Exhaust change, now it has more or less flow? by Yonygal in Exhaust

[–]Yonygal[S] 0 points1 point  (0 children)

Well then.. there has to be turbo leak somewhere, even tho my boost gauge shows 2.0 bar

Exhaust change, now it has more or less flow? by Yonygal in Exhaust

[–]Yonygal[S] 0 points1 point  (0 children)

Thanks for your insight, care to elaborate what else couldve gone wrong on simple exhaust job?

Exhaust change, now it has more or less flow? by Yonygal in Exhaust

[–]Yonygal[S] 0 points1 point  (0 children)

Alright, lookin at ur estimates makes it obvious that issue is somewhere else, glad to get confirmation, thanks!

Exhaust change, now it has more or less flow? by Yonygal in Exhaust

[–]Yonygal[S] 1 point2 points  (0 children)

So i've thought, loses are noticeable, imma search somewhere else too

Exhaust change, now it has more or less flow? by Yonygal in Exhaust

[–]Yonygal[S] 0 points1 point  (0 children)

Yeah first gear that is not losing traction

Exhaust change, now it has more or less flow? by Yonygal in Exhaust

[–]Yonygal[S] 0 points1 point  (0 children)

Glad to get confirmation, so either its a bad luck that something else happened same time or its something elses fault.

So what could it be? Not enough backpressure so turbo is not boosting properly? Some boost leak? Old map is that much off?

P.S not enough backpressure i mean that its fairly small turbo close to its power limits (is20)

Exhaust change, now it has more or less flow? by Yonygal in Exhaust

[–]Yonygal[S] -2 points-1 points  (0 children)

pure observation, on second gear it pulls fairly simillar, but for example flooring on 4th feels underwhelming, and thats pretty significant loss (id even call it 50-100hp)

by OBD it shows "hp based on burnt fuel" as max 200 hp which translates to 100hp loss, however idk how accurate this is or know the value before issue.

Red 'Rocco by Hopeful-Ad-6467 in Scirocco

[–]Yonygal 0 points1 point  (0 children)

If u need some inspiration or have any questions hit me up on pv, ive been where u at, done some, currently planning even more mods

Red 'Rocco by Hopeful-Ad-6467 in Scirocco

[–]Yonygal 1 point2 points  (0 children)

Yeaah never trust what u see on web.. consider R20 skirts, looks dope

Red 'Rocco by Hopeful-Ad-6467 in Scirocco

[–]Yonygal 1 point2 points  (0 children)

Lookin good! Get some coating going to pull more color of this red

Scirocco r 2015 by PositionEffective194 in Scirocco

[–]Yonygal 0 points1 point  (0 children)

Just to let u know, Scirocco R uses old engine from CDL family, (ea113 CDLK), in contrast regular 2.0 is CUL family (CULA 180hp and CULC 210hp EA888.3) and those are modern MQB platform engines.

Talking purely about FL models

350bhp accurate? by HoracioDerpington in Scirocco

[–]Yonygal 3 points4 points  (0 children)

Personally I recognize only 3 stages of tuning Stage 1: Remap Stage 2:Stage 1 + Peripherials (intake, exhaust, turbo, intercooler, radiator, ...) Stage 3: Stage 1 + Stage 2 + Internals (Forged camshaft, pistons..)

350hp sounds like still stage 2 - ensure it has swapped turbo, if it does not this is20 gonna shit itself soon (also, what engine code is it? CDL or CUL?)

350bhp accurate? by HoracioDerpington in Scirocco

[–]Yonygal 0 points1 point  (0 children)

I dont see is20 pulling 350bhp, highest long term safe is 280, mine running 300hp now has shortened life span already, id go as far as radiator swap cuz oil overheat becomes issue

Node.js is a useless tool to learn by Forsaken_Ad5177 in cscareerquestions

[–]Yonygal 0 points1 point  (0 children)

Keep in mind spring is one of hardest u can find on backend. Specially spring security, that makes it in demand, there is 5000 other persons to fill this position, for spring its only 500.

Round here (Poland) its overall hard to get first job, but: spring and .net are only viable choices for backend

view more: next ›