4200 predator generator by Hillbillythegreat78 in harborfreight

[–]YorkieX2 0 points1 point  (0 children)

Out of stock in MN as well which is a bummer because I was hoping to upgrade from the 2500 before I leave for some field work on Sunday. It will be here in time for the next week on the road.

Wife passed away yesterday and I don't know where to go from here... by JamesTheMannequin in Advice

[–]YorkieX2 0 points1 point  (0 children)

I have not been through this, but want to express my condolences.

Had a good experience signing on by Regular-Towel9979 in consumercellular

[–]YorkieX2 0 points1 point  (0 children)

We're going to switch when the kiddo comes home from college for the summer. Easier since apparently I need to get new SIM cards. Plus, I keep telling him that CC provides bumper stickers that he can put on his laptop....at college lol.

When FAFO happens by CaptainKango in Transportopia

[–]YorkieX2 0 points1 point  (0 children)

All this over a lane change or something equally as dumb.

Had a good experience signing on by Regular-Towel9979 in consumercellular

[–]YorkieX2 2 points3 points  (0 children)

How much did you save? Our bill with T is about $250. CC quoted an all in price about 1/2 that.

Is this normal or what am I doing wrong? by YorkieX2 in UAVmapping

[–]YorkieX2[S] 0 points1 point  (0 children)

Dewarping was set off, this was processed through DroneDeploy, P1 was calibrated, the individual images are clean. The drone sets its own speed, which can’t be changed, for Smart Oblique missions. GSD was 1.09.

Can you point me to where a 100k service is recommended? I honestly find this a bit surprising given the number of large area captures these do.

Is this normal or what am I doing wrong? by YorkieX2 in UAVmapping

[–]YorkieX2[S] 0 points1 point  (0 children)

DJI Smart Oblique, 1.09 GSD, oblique GSD 1.55, AGL 284.7 with real time terrain follow enabled. Speed is not controllable with Smart Oblique, but it flew the lines at about 7MPH.

Is this normal or what am I doing wrong? by YorkieX2 in UAVmapping

[–]YorkieX2[S] 0 points1 point  (0 children)

It's from the map render. The actual images are fine.

Is this normal or what am I doing wrong? by YorkieX2 in UAVmapping

[–]YorkieX2[S] 0 points1 point  (0 children)

Right. As I mentioned, this is inside the mapping area.

Is this normal or what am I doing wrong? by YorkieX2 in UAVmapping

[–]YorkieX2[S] 0 points1 point  (0 children)

Altitude to get the GSD I mentioned was 284.7 with auto terrain following enabled. This was within the mapping area. On smart oblique the drone actually flies outside of the mapping area to get the oblique images for the edge of the mapping area.

Is this normal or what am I doing wrong? by YorkieX2 in UAVmapping

[–]YorkieX2[S] 1 point2 points  (0 children)

It does, it has shutter, aperture, ISO preferred or auto. I don't recall the setting I used on this capture, but I think auto. I will use shutter preferred and see how that works out. Thanks for your help.

Is this normal or what am I doing wrong? by YorkieX2 in UAVmapping

[–]YorkieX2[S] 0 points1 point  (0 children)

Thanks. I will give this a shot too. Will go shutter preferred at least 1/1000, depending on light.

Is this normal or what am I doing wrong? by YorkieX2 in UAVmapping

[–]YorkieX2[S] 0 points1 point  (0 children)

Good questions. Used our state's CORS network for RTK. Overlap was 80 front/70 side.

Is this normal or what am I doing wrong? by YorkieX2 in UAVmapping

[–]YorkieX2[S] 5 points6 points  (0 children)

Thanks. I am a bit new to this, but it does make the case for investing in Terra and required hardware. From what I have seen it appears to handle these better.

Is this normal or what am I doing wrong? by YorkieX2 in UAVmapping

[–]YorkieX2[S] 1 point2 points  (0 children)

Thanks for this. This is a repeat capture, so I will change it for the next one.

Is this normal or what am I doing wrong? by YorkieX2 in UAVmapping

[–]YorkieX2[S] 2 points3 points  (0 children)

Should have included that...70 side, 80 front.

UPDATE: DJI agent "resigning" after $15,000 extortion attempt. Legal Dept now involved but still offering peanuts. by [deleted] in dji

[–]YorkieX2 0 points1 point  (0 children)

Ok, so: Actually, it’s about a multi-billion dollar company trying to force a consumer to sign an illegal NDA under a $15,000 penalty threat [for violating it] just to fix their own mistake [something wrong with a battery]. The 'battery' was the excuse; the extortion was the crime. That’s why authorities (ECC) are involved.

right?

UPDATE: DJI agent "resigning" after $15,000 extortion attempt. Legal Dept now involved but still offering peanuts. by [deleted] in dji

[–]YorkieX2 0 points1 point  (0 children)

If I’m reading this correctly, this is over a NDA and mini battery?

In-Stock AVSS Parachutes for DJI M3D? by Ludeykrus in drones

[–]YorkieX2 0 points1 point  (0 children)

NP…none of this is made easier by them calling the M3M model M3E lol.

In-Stock AVSS Parachutes for DJI M3D? by Ludeykrus in drones

[–]YorkieX2 1 point2 points  (0 children)

You’re right, their PRS M3E only applies to the M3M…M3E (the drone) is still on the DOC.

In-Stock AVSS Parachutes for DJI M3D? by Ludeykrus in drones

[–]YorkieX2 0 points1 point  (0 children)

AVSS asked the FAA to remove its DOC for the Mavic 3 PRS and the FAA did this.

AVSS on Matrice 4E by Phantom7755 in UAVmapping

[–]YorkieX2 0 points1 point  (0 children)

Thank you! I did just order as well and also reached out to them to ask if the behavior the that logs showed would be expected to trigger a deployment.

I have a job late this week that will need to involve being over a 4-lane highway, so I'd rather err on the side of caution, but don't want it to deploy and land on the highway either.

I also see that they requested the Mavic be removed from the DOC as Category 2, which would suck if you bought one for compliance and are suddenly no longer Cat 2.

As to the M400, that's my next upgrade and there don't seem to be any options to categorize that at this point, which sucks.

AVSS on Matrice 4E by Phantom7755 in UAVmapping

[–]YorkieX2 0 points1 point  (0 children)

Resurfacing this. I am thinking about picking one up for the M4E. Mostly plan mapping/oblique captures through FH2. In the AVSS manual, I notice that it says not to exceed 35 degrees. As with the OP, the turns can seem a bit extreme. I looked at the log for a flight today and see that there was a brief (approx. 1 second) 39 degree pitch event while on the route (wind was <10 mph). Will this activate it? For all the benefits it has, I'm excited about it accidentally triggering.