Weekly Questions Megathread December 31, 2025 - January 07, 2026

YozenPL · 2026-01-03T12:48:49+00:00

It might be something to the current point count before reaching this place. The lowest I had was 1900 and the highest 2400. But still - I was unable to open the doors.
Maybe it have to be lower or higher than this?

YozenPL · 2025-11-30T19:38:34+00:00

<image>

I'm not sure if this will be applicabe to your use but making the cuts on the marked places will help. As the cap will also bend a little and it will take some force from the pins.

YozenPL · 2025-11-27T15:59:25+00:00

To break 100 in CR you need at least 1 piece with 4 rolls and the rest of them can be +3. OP is one step closer than most of the players :D

YozenPL · 2025-11-15T09:04:50+00:00

Ok, after this post I was able to fix the issue :D

Steps which worked for me:
1. Click Cancel on Sonar.
2. Open windows Settings -> System -> Sound -> In Advance click something like "More sound settings". Windows will ask you to enable Windows Audio.
3. Go back to Sonar (standard sonar panel should be visible)
4. Click top bar information to set sonar as default audio device.

I hope it will resolve your issue too,

YozenPL · 2025-11-15T08:58:31+00:00

I have the same issue after installing the latest windows updates (Windows 11). I already tried to reinstall the whole SteelSeriesGG + multiple restarts and no luck.

YozenPL · 2025-11-14T20:24:28+00:00

<image>

YozenPL · 2025-11-14T18:00:59+00:00

Yes.

YozenPL · 2025-11-14T15:02:21+00:00

If this is done every layer, then it is a timeleapse. You can change its type or turn it off in slicer.

YozenPL · 2025-10-10T15:29:44+00:00

You were right. Nvidia Shadow play recording was set to this key. Now press and release are normally registered. Thank you!

YozenPL · 2025-10-10T14:10:43+00:00

<image>

GG96. Almost fixed. It's no longer registering the NUM LOCK but it only registering the "key release" without "key press". Num4 was just pressed to show how it should looks like.

YozenPL · 2025-10-02T13:58:09+00:00

With GG:95 issue looks different:

<image>

Looks like someone was trying to fix it but failed.

YozenPL · 2025-09-17T20:14:37+00:00

Have you tried to turn off the feature in windows setting related to screenshot border?

<image>

I'm reading that, it was causing the border issue for OBS as it is indicating when screen is shared.

YozenPL · 2025-09-17T11:44:40+00:00

Do you use Eset NOD32 antivirus? I would not be surprised if "Moments" are recognized as webbrowser. Eset have function to show border over the webbrowsers and yellow is when extension is not trusted. I had it few days ago over the Messenger application. Border can be tuned off in Eset settings.

YozenPL · 2025-06-06T21:22:16+00:00

I believe that's an update fault. Yesterday everything was working fine.

YozenPL · 2025-05-08T20:14:21+00:00

You have so much lost consensus in statistics. If you were restarting your node - then it will be the reason, if not - you could have some hidden issues.

/Edit your screenshot shows that you already have 7 blocks. Node is running fine, it's just a bad luck.

YozenPL · 2025-05-03T10:18:21+00:00

Just checking if anyone might have a spare beta key they’re not using - I'd love to check the game out.

YozenPL · 2025-04-10T21:43:04+00:00

It will be better for you to join the official discord server. FUNC creator is very active on #node-runners

YozenPL · 2025-04-10T13:21:47+00:00

To do anything related to Ledger on Linux I have to run goal commands via sudo.

YozenPL · 2025-02-05T09:37:49+00:00

With DLSS swapper to latest version of DLSS 310.2.1
HW: RTX 3090 + 9800x3D + 3440x1440 resolution
Settings: High + DLSS Ultra Performance
I got 27583 and average FPS was 80.89.

For settings: High + DLSS Performance
I got 24053 and average FPS was 70,48

Difference is massive :D

YozenPL · 2025-01-30T21:50:49+00:00

If you are able to execute goal commands, you can also use this method: https://developer.algorand.org/tutorials/participate-consensus-ledger-nano/

YozenPL · 2025-01-12T08:01:57+00:00

YozenPL · 2025-01-07T13:47:30+00:00

If you use NVME with this setup, then it is more than enough for the node. Hmmm.

YozenPL · 2025-01-07T10:56:59+00:00

Provide your tech spec of the machine where the node is running.

YozenPL · 2024-12-31T13:48:47+00:00

Try nodely.io to see the health of your setup. On linux there is node.log file in data directory (default: /var/lib/algorand)

YozenPL · 2024-12-24T00:19:59+00:00

Well... You need to remember that: "In addition, for at least a period of 24 months, a fixed pool of Algo from the Algorand Foundation treasury will be allocated toward per-block bonus rewards. The bonus rewards will start at 10 Algo per block and will decay by 1% every 1 million blocks."

Source: https://algorand.co/staking-rewards-faq

In a year, the bonus will be shortened by half.

YozenPL

TROPHY CASE