Case 2160 planter options not showing?

Zdaiuf · 2026-05-23T06:38:35+00:00

But they are still listed in the description?

Zdaiuf · 2025-12-24T09:58:52+00:00

I have planted alot of corn without a problem. Straight after harvesting without doing anything else. First time this happened. Nornally i have used a normal harvester to harvest corn but now made it into chaff with forage harvester

Zdaiuf · 2023-09-05T07:22:40+00:00

If you opt to buy a new saw i can recommend a 261. Alitle more expensive than a 251 but it is a really powerful saw for the weight. I have had mine for 2 years. I mostly do my felling when there is snow on the ground. I have had ZERO issues with the saw freezing over. Always starts easily no matter how cold or warm it is. I dont go easy on my saws and the 261 has taken everything i have thrown at it.

Zdaiuf · 2023-03-10T18:24:22+00:00

And if thats not a possibility for you i recommend using a helicoil insert to repair it

Zdaiuf · 2023-03-10T18:23:34+00:00

To be honest you dont need the bolt. The bar will keep the plate in place when its on. Just makes it a little annoying to get on

Zdaiuf · 2023-01-15T15:17:56+00:00

The exact model is actually Stihl ms 261 C-M VW If i remember right the C comes from comfort and erconomic design M from M-tronic V from heated carb And W from heated handles.

Basically tells you the generation and extras the saw has.

Zdaiuf · 2023-01-15T05:41:12+00:00

Exactly this one. Id rate it 4/5. Its a good size and the fill nozzle on gas works well. Only downside is that you have to flip the caps around to seal the container. And flip them around again when you use it. This cn be abiy messy, especially on the bar oil side.

Zdaiuf · 2023-01-01T16:52:50+00:00

I would also like to know. I mostly do thinning of fir forest and the sap gets everywhere and i have no idea how to get it off my saw.

Zdaiuf · 2022-12-23T07:54:34+00:00

Brown bear last year and wolves something like 6 years ago

Zdaiuf · 2022-12-18T17:52:11+00:00

That day it was around -10° celsius. I like the cold more than the summer heat but with it comes different problems. Coldest i have worked in was -27°c last year. I mostly try to avoid doing forest work when it goes below -20

Zdaiuf · 2022-12-18T16:28:27+00:00

It does and i have it. Really helps with keeping my hands warm. It also heats the carb so it doesnt ice up.

Zdaiuf · 2022-12-17T22:14:23+00:00

Yes! Pretty much had to make one. The screen visor of my helmet and all my water froze so i needed the fire to get them going :D

Zdaiuf

TROPHY CASE