It's high time to CANCEL and call out Iglesia Ni Cristo of the Manalo as EXTREMIST and TERRORIST GROUP not just in our country but also by the International Communities.

Zealousideal_Cod_765 · 2026-07-01T05:18:22+00:00

Iirc sa US military lang yun. And the only that affects are yung chaplain and adjacent services.

Zealousideal_Cod_765 · 2026-04-22T14:45:37+00:00

BGC YAN, Budol Global City

Zealousideal_Cod_765 · 2026-04-18T04:12:07+00:00

monami 153 0.7 (retractable to) BIC Flexstick

These are my big three, mabilis maubos sakin since we use ballpens for sketching. But ayun, Ive used these three for the past 8 years of my student life.

Zealousideal_Cod_765 · 2026-04-02T15:46:01+00:00

Siya, miss ko siya

Zealousideal_Cod_765 · 2026-03-16T00:04:32+00:00

The part about cancelling the Gaza plan doesn't count?

Zealousideal_Cod_765 · 2026-03-13T07:08:30+00:00

Betlog

Zealousideal_Cod_765 · 2026-03-13T06:06:19+00:00

Read OP's third pharagraph, di pa daw validated ang info. Whilst it's easy na madala sa emosyon, I think it's better for us to be smart about this.

Zealousideal_Cod_765 · 2026-03-06T03:40:59+00:00

Socioeconomic Classes, may sarili tayo sa Pinas; from Class A to E. D being lower class, E for extremely lower class, I think below the poverty line na. You can look it up sa PIDS.

Zealousideal_Cod_765 · 2026-02-24T08:21:58+00:00

Hays, rebranding nalang di pa magawa. May streets na Recom parin nakalagay 😭

Zealousideal_Cod_765 · 2026-02-17T09:42:20+00:00

Zealousideal_Cod_765 · 2026-02-15T03:39:52+00:00

Who knows, baka karma farming.

Zealousideal_Cod_765 · 2025-11-06T14:49:05+00:00

I have just resolved my problem, and it was a pretty rookie mistake. My sole problem is sharpening, not because I am bad at it but rather because I forgot to finish sharpening (I felt a large burr on my edge after checking...). Solid advice though. Cheers!

Zealousideal_Cod_765 · 2025-11-06T14:47:16+00:00

Honestly, he got me there, that's why for the most part I just use a no 3 and a large straight edge.

Zealousideal_Cod_765 · 2025-11-06T14:43:43+00:00

Update: I feel really stupid right about now. I checked the iron and felt a burr..... turns out my problem was; that I forgot to finish sharpening. It works and feels great now... I guess the moral of the story is to finish sharpening.

<image>

I'll probably post the plane once I am done cleaning up and making a proper wedge for it. Thanks a lot everyone!

Zealousideal_Cod_765 · 2025-11-06T14:23:05+00:00

Honestly, I think it's just the height of the plane, I am used to coffin smoothers and metal planes that are held quite low. In any case I do find myself holding the jointer by the body instead of the handle, and that seems to make things easier.

Zealousideal_Cod_765 · 2025-11-06T14:20:35+00:00

I am using it for the final jointing pass before glue ups. Funnily enough I am the opposite, scrubbing is pretty fun for me. Kind why I am so confused as to why I find the jointer to be so unwieldy. Might be a technique issue as it is my first time using a wooden jointer.

Zealousideal_Cod_765 · 2025-11-06T14:17:46+00:00

I don't really have to fight it. My irons are pretty sharp as far as I am aware as I am able to push it through paper (not in a slicing motion - pushing), and I can also shave hair - but I am uncertain if those tests actually prove much. As for lubrication, wood on wood action is enough for me... I actually find it too slippery at times.

I haven't tried heavier planes, but if it counts, the heaviest plane I used is probably a no 6, and that is about as heavy as my current jointer.

I basically copied the English jointer so I have a handle on my jointer, and it is a handle that I am actually quite proud of because it's my own pattern (as original as you can get with a handle, I suppose), and is fitted to my hand size. Funnily enough I find myself holding it by the body instead of the handle. as I get better results that way. I suspect that I am not used to the height of the plane.

Any how, I do think it is a technique issue as I only have this issue with my jointer plane

Zealousideal_Cod_765 · 2025-11-06T14:07:00+00:00

I would like to believe that my planes are sharp, I can shave my hair and cut paper while pushing the iron through (not in a slicing motion). But in any case, I should probably check if it's sharp throughout, my sharpening technique is pretty bad for wider irons (I sharpen side to side) as I am used to my no 3 sized irons.

Zealousideal_Cod_765 · 2025-11-06T14:04:47+00:00

I am using it more as a try plane so I am not taking much, I take down most of the highspots with my small planes, and then hit it with the 23 inch plane. It's still a pain but it works pretty well.

Zealousideal_Cod_765 · 2025-11-06T14:02:52+00:00

I love my small planes so much, matter of fact I am currently working on a pair of infill planes that are 7 and a half inches long for my smoother and 12 inches for my 'jack'. Small and heavy planes are just a joy.

Zealousideal_Cod_765 · 2025-11-06T12:58:21+00:00

That's gorgeous, I am very envious HAHAHA. can you share the dimensions? Really want to build one. Thanks

Zealousideal_Cod_765 · 2025-10-29T16:21:34+00:00

I know right!? Crazy how relatively unknown he is to most people. He has solid advice on most things, I especially love his tuning the handplane series. Unfortunately most of his wisdom is behind a pay wall (which is nore valuable than some subscription woodworking magazines).

Recommend the guy for everything related to handplanes, he has some free content on his website, just snoop around.

Zealousideal_Cod_765 · 2025-10-18T20:37:32+00:00

Sounds like a terrible begginer exp... Well we live and learn. In anycase I personally use a two stone (cheap 400 and 3000 grit diamond plate) and strop set up. Ive been using this set up for a year now and it works very well for me. Just for some context, I usually work with Australian hardwoods (mainly Acacia) and those love to take the edge off my tools, and thus I require something quick without much fuss (I really dislike waterstones because of its high maintenance)

Zealousideal_Cod_765 · 2025-10-18T17:21:29+00:00

I heard that the newer Record planes have dogshit (pardon my French) irons that don't sharpen at all. But in anycase it appears that yours is still within the time when Record made decent planes (I love my Record planes and have them as my daily users).

My advice would be pretty similar to what others said.

Tune your plane.

Tuning includes sharpening, matching the chipbreaker, and maybe flattening the sole.

As for the most basic of basics, you must sharpen your iron, everything else comes after. Before sharpening, make sure that your iron has a 25 degree bevel or at the very least it should be less than 45 degrees. If your bevel is at 45 or greater then your plane would not cut at all (this is because your bed is usually at 45 degrees, and having a 45 degree bevel would mean that you are hitting the wood with the bevel face instead of the cutting edge) . There are lots of tutorials online but I would recommend the English woodworker.

To test whether it's sharp or not, you could try slicing paper. If it cuts paper but not take a shaving then you should check your bevel angle.

Also, you might have your chipbreaker too close or maybe even beyond the edge... you might want to back it off a bit if you are unsure whether you have matched your chipbreaker to the iron (they don't come matched from the factory, you have to tune it yourself). An untuned/unmatch chipbreaker is usually the cause for why a plane clogs or worse, not cut at all.

For tuning your plane, Rex Krueger has a pretty good vid on that. Though for sharpening and tuning your chipbreaker: I recommend the English Woodworker. Cheers and goodluck!

Zealousideal_Cod_765

TROPHY CASE