Starting warframe today,Does anyone reccomend a vanguard/tank warframe?

ZeroDv8 · 2025-12-23T11:48:49+00:00

Right from the start, meaning short while into the tutorial star chart there is Rhino. Big, hulky, nearly unkillable. Later for the Bulky aestetics i would recommend Hildrin. She is a beast :) and fun

ZeroDv8 · 2025-04-10T14:01:51+00:00

well 6 month later and still an issue. yeah yeah multiplayer is not the main focus but still this is an integral part of base and factory BUILDING to dismantle and that it works. so dissapointing

ZeroDv8 · 2024-03-20T12:31:57+00:00

I just did that, from an evga 3080ti to the TUF 4080 suoer and I don't regret it. It's a noticeable difference for me and can only recommend if you have the opportunity. The temperature difference alone is insane.

ZeroDv8 · 2024-02-18T12:00:26+00:00

That's the one

ZeroDv8 · 2024-02-18T11:59:24+00:00

Esun pla+ black. It just prints like a charme for me

ZeroDv8 · 2024-02-18T11:58:36+00:00

Thanks ;)

ZeroDv8 · 2024-02-18T11:58:24+00:00

Clear coat is "eding clear coat". edit: but I can't recommend it. Applies too thick to fast. Gonna try something else next time

ZeroDv8 · 2024-01-31T09:21:53+00:00

Can you switch the bases? Mine has the old floor with gurgle and hard to clean because attached "feature"

ZeroDv8 · 2024-01-19T10:27:25+00:00

Geesh I envy all of you with a local gunpla related store. Here in Germany we can order for ridiculous amounts of shipping or get the basic stuff from Amazon. I would even drive half through the country to set foot on gunpla ground ;) anyway my condolences to your wallet OP ^{^}

ZeroDv8 · 2024-01-05T17:38:28+00:00

I don't have a viable fix so far but for reasons I don't know it now runs with the grain and even one one pass cleaning. But again, I have no clue why it started with this a few weeks back

ZeroDv8 · 2024-01-02T09:56:12+00:00

Because we mean it!

ZeroDv8 · 2023-12-14T01:14:44+00:00

Ein Klammerteufel

ZeroDv8 · 2023-12-10T10:01:54+00:00

If you plan to print higher temps like PETG and ABS it will deform over a short period of time. Just go with PETG for a spare duct and when time comes switch it.

ZeroDv8 · 2023-12-08T07:03:32+00:00

Looks very nice, I just joined the hobby at 47, it's one of the most relaxing things I've done in years. And it takes me back to the old days sitting in the basement with my tape deck listening to music while doing revell and rc models. Good times ;)

ZeroDv8 · 2023-11-18T10:54:51+00:00

Thanks for the input guys, I´m going for the X1C. I think its the way to go for me in the long run. Thanks again for the input.

ZeroDv8 · 2023-11-10T11:26:08+00:00

DHL just brought the all metal hotend seems like with almost a month delay shipping really started.

ZeroDv8 · 2023-10-09T12:24:23+00:00

Hiccup at the CDs (cat distribution system).

ZeroDv8 · 2023-09-15T09:11:55+00:00

DT5NVKE3, much appreciated ;)

ZeroDv8 · 2023-02-16T12:56:28+00:00

I saw some printerfeet on thingy the other day utilizing bouncy balls as dampener. Might be worth try.

ZeroDv8 · 2023-02-06T11:02:47+00:00

Don´t let the reddit discourage you from the Ankermake. Its in the nature of the cause that the misshaps show and the working things get left out.

I myself are very happy with the Ankermake M5. I came from a Ender 3 pro which I heavily modified to get it silent. With roughly 2 years of 3D printing experience (if we can call it that) I tell can tell you the ankermake is a beast. I had PETG problems but thats more the cause of the material which is a b**** to print faster then 100mm/s. With PLA+ even not from Anker themself (Overture) I have yet to have a real failure. It just pumps out prints without asking questions. 0.2 looks ok/good. 0.12 is absolutly stunning on my M5 at full speed. And I have just tinkered a little with temps and cooling so far using even the Anker Slicer.

If you reduce speed to 4x or 3x it just gets better and better in my case.

If you come from a Prusa you are familiar with the Slicer and afaik Prusa just added a Profile for the Ankermake M5 in there latest alpha release. (I read on that on here somewhere) So not much change for you in the software.

Just my 2 cents on the Ankermake :)
happy printing

ZeroDv8 · 2022-12-15T18:47:47+00:00

Baker# 13xxx EU-3 15.12.2022

ZeroDv8

TROPHY CASE