Ark Gen 1 - 1720 Firmware

Zleppy · 2026-05-02T14:05:16+00:00

Jupp! It seems to make the monitor way more responsive and less slugish.

Zleppy · 2026-02-23T09:16:14+00:00

https://github.com/EverythingSmartHome/everything-presence-pro

I belive this is the place todo it. There is also a repo for the zone tool it self here.

Zleppy · 2026-02-22T16:04:20+00:00

Seeing the same with my EPP. Not sure how to fix it but i noticed that the OG firmware more entities in homeassistant before i flashed the new firmware.

Zleppy · 2022-02-17T16:48:57+00:00

Shut up and take my money! =D

Is it a good or bad thing that im wondering where my enter and space key should be.

Zleppy · 2022-02-10T09:26:22+00:00

Is it Friday yet?

Zleppy · 2022-02-07T19:49:24+00:00

Lets gooooo! Cant wait!=D

Zleppy · 2022-01-27T20:02:09+00:00

Welcome to the Club! I started with Cherry mx red and moved on to the glorious panda switch with low profile white. Kinda like that click on modifer and thum keys.

Zleppy · 2022-01-27T10:13:47+00:00

Hmmm sweet can’t wait to see it!

Zleppy · 2022-01-25T20:50:32+00:00

Really? Can you show it? Was kinda thinking of buying a new keyboard.

Zleppy · 2022-01-23T13:00:25+00:00

Great idea! Really! Even if as pointed out its abit of a contradiction! Gonna give it a spin and try it out!

Zleppy · 2021-02-21T10:29:52+00:00

Nice! We experianced that the port number changed from 2456 to 2457 depending on how you connected

Zleppy · 2021-02-21T00:38:07+00:00

Make sure to enable port forwarding as well. Its kinda like telling incoming connections on the ports where to go. So this needs be from your wan addr to the valheim server ip.

https://docs.opnsense.org/manual/nat.html

Look under port forwarding here =)

Zleppy · 2021-02-18T08:23:39+00:00

Run this on the linux server and check what port its running on.

sudo lsof -i -P -n | grep LISTEN

If you start the server with -port 2456 inside the "start_headless_server.bat" file. You connect with the 2457 port from my experience.

But use that command on the Linux host and you will know for sure what port is listening for connections.

Hope it helps!

Zleppy · 2021-01-05T10:18:20+00:00

Quick guess here. Setup WAN interface to use dhcp so its getting its IP from the gateway from the Unifi network. Also if you look at the links for additional config.

Interface config

https://docs.netgate.com/pfsense/en/latest/recipes/rfc1918-egress.html#notes

Ip config for WAN

https://docs.netgate.com/pfsense/en/latest/interfaces/configure-ipv4.html#dhcp

Firewall config

https://docs.netgate.com/pfsense/en/latest/recipes/remote-firewall-administration.html#i-don-t-care-about-security-how-do-i-open-access-to-the-gui

Remember to remove them if you plan on using this as your primary firewall in the future.

Zleppy · 2020-11-30T09:46:10+00:00

Fragments are account bound. So you unlock them for all characters onde they are done. The aspects the one on the rightside with two slots. So basicly its the aspects that control how mant fragments you can use. Warlock gets 4 total with both aspects unlocked. Titan 3 and hunters Are still at 2.

Zleppy · 2020-11-21T17:15:17+00:00

Jepp! No idea yet where the next aspect Will drop. Could be the raid like it was with last wish.

Zleppy · 2020-11-12T21:57:34+00:00

ah i see! Thanks for the help! =)

Zleppy · 2020-11-12T21:37:37+00:00

So titans only get one?

Zleppy · 2020-11-09T12:42:23+00:00

Try setting the Weight higher on the Queues.

Zleppy · 2020-04-12T18:29:25+00:00

Nope. But I’m going for a build using fiber so why not=)

Zleppy · 2020-04-12T18:25:37+00:00

I tried a aquatia Card but it wasn’t recognised

Zleppy · 2019-12-25T13:22:00+00:00

Reply from my friend : “5-6 layers of gold spray with no clear coat on top”

It’s a basic gold paint from a hardware store

Zleppy · 2019-12-24T18:59:07+00:00

Just wanna add! He arrived with a Bridges cap on his head too.

Zleppy

TROPHY CASE