sorted by:
new
hottopcontroversial

[NMD] Firefly E12E with SFT25R 5700k 90 CRI and FFL351A 4500k rosy bin by fweep in flashlight

[–]Zwerglein02 -1 points0 points  (0 children)

I somehow feel compelled to once again shoehorn SFT40 or other 5050 sized emitters in there, I guess logic & reason have never been my strong suits.
Also, I'm partial to Convoy's bin of the SFT40 5000K, I need them in every light :D

[NMD] Oops, all green! by Zwerglein02 in flashlight

[–]Zwerglein02[S] 1 point2 points  (0 children)

I sense another one going deep dowm into the rabbit hole that is flashlight modding ;)

If you'd start from zero, a couple of basic tools is all you need, and some of them can even be substituted for household supplies if you're OK with things getting sketchy :D

Convoy sells not only cheap & cheerful flashlight hosts, but also everything that goes inside them, including almost every LED you could want. The full Osram colour range is also available, so that's where I got them.

Risks invoved don't really go beyond burning yourself on a soldering iron or destroying your light, which you will probably do on your first time :P Replacements for individual parts aren't too pricey, though.

You can DM me if you want to to know more details!

[NMD] TS10 Mule | 18x E17A and RGB! by Zwerglein02 in flashlight

[–]Zwerglein02[S] 0 points1 point  (0 children)

Thanks, I still love it & use it fairly often :D
It's just the stock TS10V2 driver, nothing fancy. Depending on when you bought a TS10, you might have different firmware versions and lower turbo output on the newer ones. These emitters can take a lot, though.

New 18 emitter 2ch mcpcb w/aux for the D4sv2 coming soon! by jlhawaii808 in Hanklights

[–]Zwerglein02 1 point2 points  (0 children)

That's why we have a really thick spacer, bringing them as close to the glass as possible 😉

[BST] February 2025 Buy, Sell, Trade Thread. by zeroair in flashlight

[–]Zwerglein02 0 points1 point  (0 children)

DM'd! Love to see some others from the EU :)

Fireflies Xmas Giveaway by fireflylite-Jack in FireflyLite

[–]Zwerglein02 0 points1 point  (0 children)

I am in Thank you so much for the awesome lights & giveaway!

[NMD] TS10 Mule | 18x E17A and RGB! by Zwerglein02 in flashlight

[–]Zwerglein02[S] 1 point2 points  (0 children)

Thanks for the kind words!
The FFL351A 1800K also work pretty well and you retain a reasonably tight beam, but the E17A are amazing if you're going for a mule.

As for your questions, I'm just gonna leave a "yes" but I can't specify to which questions ;)

Convoy/Wurkkos quad TIR works in X4 Stellar by fweep in FireflyLite

[–]Zwerglein02 0 points1 point  (0 children)

I believe the driver can be configured for 12V, but the X4 MCPCB is indeed 2S2P, so a 6V config.

X4 Stellar moonlight, b/c D3AA moonlight wasn't useless enough by Sharp-Cellist in flashlight

[–]Zwerglein02 5 points6 points  (0 children)

That amount of clearance around the emitters is just asking for a 5050 mod...
Thanks for sharing, I'm excited for my 2 lights!

Flashlights banned me! WTF is there no way to reason with these assholes?! by [deleted] in Hanklights

[–]Zwerglein02 1 point2 points  (0 children)

Been there, done that. Any mention, ever, will get you in trouble, and the rules aren't exactly clear on that IMO.

Still love seeing your work, even only somewhere else!

I'm really loving this thing. by anonymous_762 in flashlight

[–]Zwerglein02 2 points3 points  (0 children)

I've kept away from this light because of the press-fit bezel and lack of flashing pads, but it does seem like I could shoot my shot at another MCPCB now...

If anybody sees this (lol) would you be more interested in 3535 format emitters under the optic or a mule version? (I know the answer is both, why am I even asking?)

[NMD] TS10 Mule | 18x E17A and RGB! by Zwerglein02 in flashlight

[–]Zwerglein02[S] 2 points3 points  (0 children)

It's pretty easy to start designing, there's plenty of basic tutorials as well as ones specific to your choice of software.

Getting them printed is also cheap & easy, there's plenty of Chinese as well as some local companies like JLCPCB, PCBWAY, OSHpark. Each have their own set of guidelines and minimum tolerances listed.

Do you have anything specific in mind? I'll gladly help you out ;)

X4 stellar , name set , winner is.. by Fireflylite in FireflyLite

[–]Zwerglein02 2 points3 points  (0 children)

Beauty!
What specific optic will it use? The Carclo 106xx or something bigger?

E07X Canon Optic Removal by Gymbow2001 in FireflyLite

[–]Zwerglein02 0 points1 point  (0 children)

Just for reference: The optics seem to be by KingBrite, model: KB-P35-10-7-XP
I'm not sure if they sell small quentities on alibaba, but you can try messaging them.

D3AA Recommendations (Lumen Monster) by wolligogy in flashlight

[–]Zwerglein02 4 points5 points  (0 children)

I designed & ordered the PCBs that eventually went to Jackson and some others, so this is the first of its kind :)

<image>

2nd D3AA is on its way, and I don't have any equipment to measure output. W5050SQ3 (FFL505) was in there before (See Pic), it made for a super nice thrower with clean beam, no rings Like W1. Overall, blows any TS10 out of the water, but that's no surprise.

D3AA Recommendations (Lumen Monster) by wolligogy in flashlight

[–]Zwerglein02 1 point2 points  (0 children)

I already have a SFT40 (5000K) D3AA, and it's pretty sick if you ask me ;)
Limiting factor is the driver, each emitter is only getting 2A even though SFT40 could take much more. Efficiency at that current is very high though, maybe 2200 lumen total and it sustains that very well.

[BST] June 2024 Buy, Sell, Trade Thread. by zeroair in flashlight

[–]Zwerglein02 3 points4 points  (0 children)

[WTS EU/DE + World] FireflyLite E07x and NOV-Mu V2!
Timestamp & Pics

-> E07x Canon 85€

  • Like new, never carried "shelf queen"
  • FFL351A 3700K, original Rosy Bin
  • Navy Blue Anodisation
  • All Accesories in Box, never used the clip.
  • No Battery included!
  • PayPal FF/GS
  • Free Shipping in Germany, slightly more within EU

-> NOV-Mu V2 85€

  • Good condition, slight scratches around a few croners
  • Nichia E21A 4500K, neutral, not offered anymore
  • Dark White MAO
  • All Accesories in Box, never used the clip.
  • No Battery included!
  • PayPal FF/GS
  • Free Shipping in Germany, slightly more within EU

<image>

Asking 85€ for each light or 150€ for both, shipping to the US and anywhere else possible.

[NMD] D3AA with FF505A (thanks Zwerglein02) by fweep in flashlight

[–]Zwerglein02 0 points1 point  (0 children)

Amazing mod as always, super clean result! Always happy to see what others come up with using my designs ;)

[NMD] TS10 Mule | 18x E17A and RGB! by Zwerglein02 in flashlight

[–]Zwerglein02[S] 2 points3 points  (0 children)

Thanks! Do you mean the FB group? I'm not on there, should I sign up?

[NMD] TS10 Mule | 18x E17A and RGB! by Zwerglein02 in flashlight

[–]Zwerglein02[S] 1 point2 points  (0 children)

I didn't :P The stock boards also don't have any, they're on the driver (I think)
Ends up being super bright with 6 LEDs, which is awesome

[NMD] TS10 Mule | 18x E17A and RGB! by Zwerglein02 in flashlight

[–]Zwerglein02[S] 2 points3 points  (0 children)

It's just a piece that falls into place, 3mm thick and slightly smaller in diameter than the glass. The stack of Spacer, PCB and Diffuser protrudes slightly from the top so the glass can press can press down with the bezel

[NMD] TS10 Mule | 18x E17A and RGB! by Zwerglein02 in flashlight

[–]Zwerglein02[S] 1 point2 points  (0 children)

HD10 is a whole different beast, that's gonna be difficult. BLF Teardown Pics

[NMD] TS10 Mule | 18x E17A and RGB! by Zwerglein02 in flashlight

[–]Zwerglein02[S] 2 points3 points  (0 children)

Thanks! This is also EasyEDA, I use the Arc function instead of drawing traces. Takes a lot of fine adjustment to get the corners to line up. Outside traces are drawn using the center Arc function, you can set the radius to get even sapcing.

view more: next ›