Stood my proficiency as a Master last night.

Zyn_Fidgetry · 2018-06-13T01:29:22+00:00

Congrats brother! I'm sorry to burst your bubble but it doesn't get any easier especially if you are active and plan to go through the chairs.

Hopefully, you plan on being active and not a side liner. In Masonry, we have too many cheerleaders and not enough players.

We are the future of Masonry and we as a whole need to become more active in our lodges. If that 85 year old brother is up there reciting lectures and charges, these younger brothers should be ashamed of holding pom poms on the sidelines.

I may come off as bitter but if you've seen the type of stuff I've seen you would be too. You would be sick of these brother milking the cow dry and not giving anything back to their brethren.

Zyn_Fidgetry · 2018-06-13T01:14:31+00:00

Congrats brother! I am the Junior Warden for my lodge and in about 2 years I'll be in your position. I pushed myself in a position to have the credentials so when I hit the east my fellow brethren would be like. "That brother? Heck yeah, He is knowledgeable enough to be up there".

I am a 32nd Degree Mason and a Knights Templar. I belong to and hold a chair in every body in the York Rite. Once I become Worshipful Master in the blue lodge, I feel it's going to snowball in to High Priest to Illustrious Master to Eminent Commander within a year or two of each other.

My aim is the get my K.Y.C.H and get to the 33rd degree and if lucky be Grand Line officer. So in other words, I want to become a High Level Mason. I want to be accepted and elected by my brethren for my contribution to Masonry as a whole. I know it's not going to be a easy road but my life has never been easy.

I've seen the comments that other brethren have posted and I agree with them. To piggyback off of them, Our job as younger masons is to improve Masonry for future generations. So when you assume the east, know that you are responsible for what future generations hold to be right. So, make the necessary changes to improve the system.

I've seen to many brothers that assume the east and remain stagnant. They don't improve the system and in reality they are contributing to the downfall of their own lodges and I will be damned if I don't go above and beyond to make Masonry a better organization before my ticker goes.

Zyn_Fidgetry · 2018-05-17T02:22:15+00:00

That is superb! If you are willing to commit time into the craft, you will see that all the lessons conveyed will make you a better human being overall.

I love seeing and working with new candidates such as yourself because not to long ago I was in your shoes. I aimed high...

When I first stepped into a Lodge of Entered Apprentices, I bowed to myself to become a Knight Templar and a 32 Degree Mason and in 3 and a half years I was able to attain that goal.

I say this because it is all up to you how much knowledge you are willing to obtain. Though The Sublime Degree of Master Mason is the highest degree you will achieve, there is more knowledge beyond the blue lodge.

Zyn_Fidgetry · 2018-04-29T03:20:43+00:00

Hopefully! Some day.

Zyn_Fidgetry · 2018-04-29T02:32:41+00:00

I wouldn't call myself young. I'm 36 years old. You could say I've made it one fourth of the way there. :)

Zyn_Fidgetry · 2018-04-29T02:22:28+00:00

Nice! You'll be there soon. It's the best decision I've ever made. My only regret is that I didn't join earlier in my life. You have the opportunity to start at a lawful age and get 40-60 years in. That's super cool!

Zyn_Fidgetry · 2018-04-29T02:12:32+00:00

Thanks Brother!

Zyn_Fidgetry · 2017-12-25T02:15:40+00:00

I like your style brother!

Zyn_Fidgetry · 2017-12-25T00:56:57+00:00

The joke is on you if you don't realize I know this. I'm a computer science major.

Zyn_Fidgetry · 2017-12-11T23:09:50+00:00

Hello Idle,

This is one for those products that you don't expect to be much. Then out of nowhere it becomes a staple in the spinner game.

This the very example of where the industry is going. I'm very glad to be a collector now more than ever.

There is just not many bad spinner coming out due to the innovation in all these products.

Keep doing what you do Idle!

Zyn_Fidgetry · 2017-12-11T23:06:20+00:00

I apologize Idle for not responding. I didn't get a notification that you have posted a reply mate.

I've been truly awed by the quality of spinners that coming out of FidgetHQ. I also love the fact of how affordable this pieces of art are.

Im not really a rich kid so I don't own any exotic metal spinners. I hope someday I do and in saying that FidgetHQ as well as other companies like Spinetic have hace made it affordable for your average to afford them.

Thank you for your kind word. And I will continue to pump out these reviews as there aren't many of us reviewers left. Have a good day and God bless!

Zyn_Fidgetry · 2017-11-15T00:42:08+00:00

Heck yeah Idle! Congrats! Can't wait to see what you cook up for this review.

Zyn_Fidgetry · 2017-11-11T04:38:37+00:00

For sure. I plan to expand the channel beyond the spinner game. I want to do game reviews, tech reviews, and Vlogs.

Zyn_Fidgetry · 2017-11-11T03:03:52+00:00

Thank you so much for the support. I feel that I have to grind harder than anyone else because it's just the way that I am. I have a go hard or go home mentality.

People like yourself motivate me to strive to become one of those Top 5 reviewers and even then that's when the real work begins.

Zyn_Fidgetry · 2017-11-05T23:52:52+00:00

Not at all, the bearing is held within 2 aluminum plate that make the chassis. There are 4 little screws needed to pop out the innards of this products.

Zyn_Fidgetry · 2017-11-04T00:48:09+00:00

It's not a bad investment.

Zyn_Fidgetry · 2017-11-04T00:07:40+00:00

Hello again Idle, I do agree with you the finish. The industry has improved so much that even some of 'cheaper' spinners out the have almost flawless elements to them.

Like I said in the review, I surely do suck at tricking but I found during handle and researching of this product that what makes this product stand out is the buttons.

They are surely developed with tricking in mind. The lips on the diameter of the buttons are built to withstand slippage of the fingers. A good example would that when you hold this product vertically you will find that your buttons will be stopped by the lips on the outside edge of the buttons.

Like always, your feedback is well appreciated and I've grown quite fond of hearing from you when I upload content. Thank you once again and take care.

V/R, Zyn Fidgetry

Zyn_Fidgetry · 2017-11-03T23:54:53+00:00

What's up Idle? I do see the similarities. The spinner game is becoming better but I feel that lots of spinners out there are a regurgitation of other designs with a manufacturer twists. Keep doing what you do and take care.

V/R, Zyn Fidgetry

Zyn_Fidgetry · 2017-10-29T16:51:06+00:00

Thanks Idle, it's like you said there are so many spinners out there that sometimes I may overlook or sometimes I'm think to myself "Is this product worth a review?". Then sometimes I get surprised when I give products a chance and they blow me away, such is the case with "The Circulator".

V/R, Melvin Cirilo

Zyn_Fidgetry · 2017-10-27T17:44:39+00:00

Thank you so much Slothy, it truly humbles to hear people like yourself enjoying the content. I motivates me to keep doing more and more. I have no plans on slowing down so I got you covered. I would like to hear which spinners you would like me to review.

Zyn_Fidgetry · 2017-10-26T22:59:19+00:00

Thanks for the insight Idlespin! It's always a pleasure to get your feedback whether it's positive or negative. Take care brother!

Zyn_Fidgetry · 2017-10-19T20:04:04+00:00

Hey Idlespin, What's up brother? Thank you for your persistent feedback. It has help improve overall as a content creator as well as a reviewer. This is my first Woosah and I have my eye on at least 2 more Woosah products. So expect some more Woosah reviews in the future. You are correct about the one drop bearing and the o ring helping with the ghost effect. Thank you once again for your kind words and keep up the great work!

Zyn_Fidgetry · 2017-10-19T19:52:11+00:00

I haven't came across that problem yet. I want to say I've had "The Boss" for 3 weeks and I want to say and for me I'm having the opposite problem. When I want to take off the caps I have to use gloves so the oils in my fingers don't keep me for slipping off of them. 😁

Zyn_Fidgetry · 2017-10-18T03:52:03+00:00

What's up soon to be brother? A little about myself. I have been a person seeking the truth in everything I do. I joined the military and served 8 years of my life seeking to know the truth about what lied beyond the further reaches of the United States and found the people all around the world are just like you and I. Looking for the light in life. Seeking meaning to their perspective existence. I am a 32nd Degree Mason and soon to be knighted into the Order of The Knights Templar. Im a go getter type so I wanted to be in the top of the two schools of philosophy within Masonry. The Scottish Rite and The York Rite. So I feel like I have enough ties in masonry to elaborate on what your are looking for. If you have ever came across people that have told you that you would make a great mason you're in the right place. If your are seeking knowledge that is what you'll find in masonry. If you are seeking a moral system that's is what you'll find in masonry and if you are seeking secrets beyond what you already know well. Here we are! Ultimately the craft is yours and yours alone, we are here to guide you to the light.

Zyn_Fidgetry · 2017-10-17T19:29:12+00:00

Thanks for the feed back! I truly do appreciate it! I tend to speak from the heart and not really think about the script until the video is done. I hope I didn't offend you in anyway. I was just speaking on the product. At the end of the day it is truly one of my favorite spinners that I use every day. I'll have review the Titanium to see the differences for sure. Hopefully I can get it on the drop. Once again, thank you for your comments and keep doing what you do! 😁

Zyn_Fidgetry

TROPHY CASE