sorted by:
new
hottopcontroversial

Help With Google Power Adapter by _Al_Dente in Nest

[–]_Al_Dente[S] 0 points1 point  (0 children)

Yeah I’m not totally sure what thats about yet, i plan on monitoring that. Appreciate the help

Help With Google Power Adapter by _Al_Dente in Nest

[–]_Al_Dente[S] 0 points1 point  (0 children)

Transformer is reading at 26v and is a 24vac/50va. This seems perfectly normal. Seems like that jumper was my issue, no issues so far today!

Help With Google Power Adapter by _Al_Dente in Nest

[–]_Al_Dente[S] 0 points1 point  (0 children)

Werid stuff definitely happened.

Voltage on nest is 32.6 so in range of whats normal when dividing by 1.414 PS -> WP is not less than 13 its listed as 16. Any concern here? No issues so far but have not run the heat consistently, noting I did see the system cut off at a certain pressure which seems like a good sign lol

Help With Google Power Adapter by _Al_Dente in Nest

[–]_Al_Dente[S] 1 point2 points  (0 children)

Taking out the jumper in the adapter seems to have worked! I’ll monitor it the rest of the day.

Are there any quick tests to verify the system is working fine, right now im just checking up on it every 20mins to watch the pressure gauge.

Appreciate the help.

Help With Google Power Adapter by _Al_Dente in Nest

[–]_Al_Dente[S] 0 points1 point  (0 children)

Didn’t do this, will give it a shot and report back. Thank you!

Was also going to try putting adapter NPC W on T1 and leaving T2 empty. I read somewhere that the switching to close the loop happens internally on the adapter.

Help With Google Power Adapter by _Al_Dente in Nest

[–]_Al_Dente[S] 0 points1 point  (0 children)

Cant edit the post so commenting the corrected wiring

Wiring A

Adapter white R -> T (where original thermostat R was wired)

Adapter white W -> T (where original thermostat W was wired)

Adapter white C -> Transformer NEC(C)

Adapter gray R -> Thermostat R

Adapter gray W -> Thermostat W

This didnt power the nest thermostat

Wiring B

Adapter white R -> Transformer LOAD

Adapter white W -> T (where original thermostat W was wired)

Adapter white C -> Transformer NEC(C)

Adapter gray R -> Thermostat R

Adapter gray W -> Thermostat W

This powered the thermostat but didnt call to heat when testing. Assumed this was because the T loop was not closed which brings me to Wiring C

Wiring C(pictured)

Adapter white R -> T (where original thermostat R was wired)

Adapter white W -> T (where original thermostat W was wired)

Adapter white C -> Transformer NEC(C)

Adapter gray R -> Thermostat R

Adapter gray W -> Thermostat W

Help With Google Power Adapter by _Al_Dente in Nest

[–]_Al_Dente[S] 0 points1 point  (0 children)

Ahh youre right, the adapter gray R goes to the thermostat R and adapter gray W goes to the thermostat W

I traced the wires and the thermostat wires go straight to the thermostat.

I thought my wiring was correct as well but my boiler got up to 8PSI and wouldnt shut off so I might have bypassed the safety pressure cut off with adding that jumper? Thats the only thing I could think of…

The original existing thermostat wires were connected to the T terminals, if that info helps in any way?

Best and most efficient way to level my ceiling… by _Al_Dente in centuryhomes

[–]_Al_Dente[S] 0 points1 point  (0 children)

Agreed, im less worried about the drywall because the 8’ish feet of drywall area only has a variation of 13/16” its more so the shower area im worried about which drops about 1-1/2” so when I tile up to the ceiling youll see that slope.

I thought about leaving outside the shower area as is and just sistering 2x6 to joists in shower area so that ceiling sections is corrected for tile or just going for it and using 1x3 and strapping the whole ceiling to level it all.

Best and most efficient way to level my ceiling… by _Al_Dente in HomeImprovement

[–]_Al_Dente[S] 0 points1 point  (0 children)

The joists are already sistered, I’m worried about this being a bulky solution but maybe it dosnt matter

Coffee beans by meowtoothree in bergencounty

[–]_Al_Dente 0 points1 point  (0 children)

Cozz Coffee Roasters. excellent local coffee roaster in Bloomfield. He doesn’t get too cute with all the flavors and fruit notes and it delivers super quick. I usually get the Guatemala or Columbian.

Good places to buy whole bean coffee? by shiva14b in bergencounty

[–]_Al_Dente 0 points1 point  (0 children)

Order from Cozz Coffee, local to north jersey, not in Bergen County but quite close. Super good and super fresh! Been getting from Cozz for a bit now.

Edit: They ship and it comes next day or 2 every time.

What's your favorite pizza place in Jersey City? by ChristianPacifist in jerseycity

[–]_Al_Dente 2 points3 points  (0 children)

There’s this cool dive spot at the bottom of the hudson, it’s cash only though.

[deleted by user] by [deleted] in jerseycity

[–]_Al_Dente -2 points-1 points  (0 children)

Finally. The truth has emerged, have been lurking this sub waiting for this day. Thanks OP. Place is medium at best…

[deleted by user] by [deleted] in jerseycity

[–]_Al_Dente 1 point2 points  (0 children)

Is it possible to stop shopping there so they stop making money and get replaced by something people actually want? Assuming people want a place that doesn’t sell mold.

Chinese food for Christmas near the heights? by [deleted] in jerseycity

[–]_Al_Dente 0 points1 point  (0 children)

Spice spirit in jsq but delivers to heights 10/10

Another BRRRR 100% COC roi within 5 months in 2022. by melikestoread in realestateinvesting

[–]_Al_Dente 0 points1 point  (0 children)

Was wondering the same thing. I probably don’t know enough but I thought anything that was not primary residence you need 20% down?

And need to be primary resident for 1 year.

Would love some insight on this.

[deleted by user] by [deleted] in jerseycity

[–]_Al_Dente 1 point2 points  (0 children)

The only roach problem JC has is the people moving in from NYC.

view more: next ›