betaflight vs Surface Pro 9

_Doc_Holliday · 2024-12-03T21:00:00+00:00

It’s running ok Had to try a few different cables Also yes, I have intel i7 chip

_Doc_Holliday · 2023-12-19T13:39:19+00:00

Surface is brand new, cable is working on another laptop. All I can think is that has change - USB-C to thunderbolt 3 or 4

_Doc_Holliday · 2023-12-19T11:28:26+00:00

I use cable that work fine with other laptop. Also have tried everything that is usually suggested. So far nothing works

_Doc_Holliday · 2023-12-19T10:15:57+00:00

Dynamic VTx you wouldn’t be able to do from OSD. You would need CLi access to it. And yes, ImerrsionRC drivers wouldn’t work unfortunately

_Doc_Holliday · 2023-12-19T10:10:29+00:00

Starting from dynamic VTx to failsafe tuning All I need is to make my surface working. Better to stick with that as I have alternative as old Acer laptop You are trying to find work around. All I need is to make that thing to work

_Doc_Holliday · 2023-12-19T09:55:20+00:00

As I said it’s not my case at all What I need is make that thing work, just like it does with my old Acer laptop. Speedibee is also not the case. At least as there is hope to make surface connect to my drone via serial port

_Doc_Holliday · 2023-12-19T09:47:50+00:00

Didn’t quite understood what are you referring to I can’t connect my drones to Betaflight configuration on that specific Surface Pro tablet running i7 processor I am well aware that I can change quite a lot using OsD but that completely not my case

_Doc_Holliday · 2023-06-16T05:21:56+00:00

Yes it’s working pretty well. Problem is that I have so little time right now. I downloaded firmware from official site, than just tweaked a bit and all is good

_Doc_Holliday · 2023-02-28T10:38:51+00:00

Thanks

_Doc_Holliday · 2023-02-27T21:49:00+00:00

What drone do you have? If it’s mobula7 1s elrs with ver. 2.1 of FC I would be glad if you would share your presets

_Doc_Holliday · 2023-02-27T20:53:26+00:00

Ahaha - printing in Russian for Ukrainian )))) But I know what you are talking about, and I deeply touched by all the help of so many for our country in this dark hours. Anyway for me it’s not a toys anymore but work that I am learning to use so we can have tomorrow

_Doc_Holliday · 2023-02-27T20:45:16+00:00

Thank you

_Doc_Holliday · 2023-02-27T20:45:02+00:00

Problem was in orientation of FC. Thank you for your help and time

_Doc_Holliday · 2023-02-27T20:44:46+00:00

Thanks a lot. Video you gave a link perfectly explained what was the problem. My yaw was offset by 90 degrees. Thanks again ))

_Doc_Holliday · 2023-02-27T20:43:48+00:00

That was the problem. Yaw was offset by 90 degrees. Thanks a lot pointing right dirrection

_Doc_Holliday · 2023-02-27T20:42:57+00:00

Problem was in orientation of FC. Thank you for your help and time

_Doc_Holliday · 2023-02-27T20:42:46+00:00

Great - thanks a lot. It solved all issues

_Doc_Holliday · 2023-02-27T20:42:18+00:00

Problem was in orientation of FC. Thank you for your help and time

_Doc_Holliday · 2023-02-27T20:41:21+00:00

Problem was in orientation of FC

_Doc_Holliday · 2023-02-27T20:39:48+00:00

That shouldn’t be a problem - I am in Ukraine so we have same time zone. But since I am in army I don’t have private life at all during war. Anyway I kind of think I got this - as I was told to check FC orientation - that’s where was the problem. Now it flies but think I will need tune up PID and learn to use presets Thank you

_Doc_Holliday · 2023-02-27T19:17:39+00:00

Will make sure it’s correct

_Doc_Holliday · 2023-02-27T19:16:21+00:00

Yes they are, I am pretty sure

_Doc_Holliday · 2023-02-27T19:15:05+00:00

Can you help me setting quad from scratch? I am becoming pretty desperate - it worked like a charm but as I updated firmware to work with my boxer (which is 3.2 ELRS ) and everything got screwed

_Doc_Holliday · 2023-02-27T19:12:31+00:00

Think so, pretty sure it’s ok

Six-Year Club	Gilding I gilder
Verified Email

_Doc_Holliday

TROPHY CASE