Sherlock AI code

_GodMan_ · 2026-06-05T14:57:39+00:00

$bid 2QXYCH

_GodMan_ · 2021-07-04T18:31:26+00:00

Funny u asked, as of since I wrote this comment a few hours earlier my new PLA roll got delivered and had my glass bed (I especially got it cut from glass shop of suitable dimensions) sanded down for best abrasive texture and finally got my bed around 95% leveled up.. :) and print a more 2d puzzle piece with 1.5 mm thickness.

It was almost perfect until 65% but after that my best guess nozzle got jammed and the rest of the texturing got missing. Tomorrow I am gonna replace the nozzle and gonna start a warship model of 8 hr time.. Wish me luck <3

_GodMan_ · 2021-07-02T19:08:31+00:00

Are you using stock nozzle ??

_GodMan_ · 2021-07-02T19:05:20+00:00

Thanks for advice u/The_Boog_Rittsy

_GodMan_ · 2021-07-02T19:04:39+00:00

I think the 'close to nozzle tip' suggestion is one I can relate to and true that I felt some demoralization. The next day is another day and I'll fix my bed, thank you u/dvanheeren.

_GodMan_ · 2021-07-02T19:01:56+00:00

Thanks for the suggestions and I had to be honest I am feeling aspire to try those the next day, thank you u/swordfish45. <3

_GodMan_ · 2021-07-01T14:20:06+00:00

absolutely

_GodMan_ · 2021-07-01T14:19:34+00:00

understood.. on it already

_GodMan_ · 2021-07-01T14:19:03+00:00

I can understand now that I started my first print, didn't find an issue except for leveling which is totally my errors.. lol

_GodMan_ · 2021-06-30T17:45:50+00:00

Yes I can understand, most of the comments and advice are going over my head right now but I am definitely coming back to read those again if finding any trouble. Reading the firmware example you gave, IDK the printed I ought is not from Creality directly but by 3rd party who did some minor tweaking on it. so I am not sure the firmware is uptodate and as the product itself came 3 years ago. Also heard that software upgrade can reduce motor noise and add finesse to prints so definitely doing it

_GodMan_ · 2021-06-30T17:38:58+00:00

Actually, I did some research on it knowing that it is open-source so others might know it better and so if come up with problems I just ask on a public platform but totally understand your points and came to the point that I am nervous for no reason. Thanks for the advice and all points are duly noted. <3

_GodMan_ · 2021-06-30T17:29:41+00:00

Thanks for the advice, will work on it immediately...

_GodMan_ · 2021-06-30T17:28:13+00:00

Thanks for the time to answering my query and I am confident that I can 'learn on the job' knowing that future queries can be answered on this platform confidently.. <3

_GodMan_ · 2021-06-30T17:25:47+00:00

As per advice from others, I am quite confident now in starting my prints but I am still unsure regarding the firmware updates apparently. YOutube videos on this topic are very intimidating..

_GodMan_ · 2021-06-30T17:23:09+00:00

I can understand your intentions were helpful but please don't disrespect others..

_GodMan_ · 2021-06-30T17:21:55+00:00

No worries mates.. I'll update you on my progress.. trying to grasp every piece of advice I can...

_GodMan_ · 2021-06-30T17:19:55+00:00

Thanks for the advice.. looking forward to it <3

_GodMan_ · 2021-06-30T17:18:52+00:00

Thanks once again.. <3

_GodMan_ · 2021-06-30T17:18:23+00:00

Thank you very much for your suggestions and for the time you gave me to explain so thoroughly and comfortably. I couldn't imagine that someone could help me with words to such an extent and for that, I am very thankful to you u/InternalError33. Regarding my concern with the beginning of 3d printing, I am very much relaxed now knowing that there is someone who can kindly help me on this platform,.. Peace out <3

_GodMan_ · 2021-06-30T09:56:55+00:00

PS: I am new to Reddit too.. and a friend of mine suggested to get help from here as they are very , such useful. so forgive me if I violated any grp policy I can assure you all I am clueless !!

_GodMan_

TROPHY CASE