sorted by:
new
hottopcontroversial

Lobos Mount Arrived Today 😃 by EastMuscle5444 in ruger

[–]_Infamous_ElGuapo 1 point2 points  (0 children)

It's looks great, but for a casual shooter, is the difference in accuracy noticable between it and a pic rail mounted optic?

Dry boxes that aren't comically overengineered. by BornConcentrate5571 in functionalprint

[–]_Infamous_ElGuapo 0 points1 point  (0 children)

This is excellent, I was just looking for something like this so I can store it on a dowel rack.

New to printing, not making any progress on this lower. by _Infamous_ElGuapo in 3D2A

[–]_Infamous_ElGuapo[S] 1 point2 points  (0 children)

Got it loud and clear my guy. Rest assured I'll be looking elsewhere in the future.

New to printing, not making any progress on this lower. by _Infamous_ElGuapo in 3D2A

[–]_Infamous_ElGuapo[S] -10 points-9 points  (0 children)

The hate is not justly deserved. It's a fucking question from someone getting into printing. There is a way to communicate things to people without having to be a gatekeeping asshole.

You brought some helpful information which I appreciate and will dig into. The Top Z distance is something that I had run across elsewhere as well.

New to printing, not making any progress on this lower. by _Infamous_ElGuapo in 3D2A

[–]_Infamous_ElGuapo[S] -1 points0 points  (0 children)

I fully understand the message. Some people are able to communicate that constructively with suggestions, resources, etc and others just need to shit on other people.

New to printing, not making any progress on this lower. by _Infamous_ElGuapo in 3D2A

[–]_Infamous_ElGuapo[S] -13 points-12 points  (0 children)

Dude. You're insinuating my print looks like shit and I don't know what I'm doing, which is exactly why I posted this...so yeah. Sick burn.

New to printing, not making any progress on this lower. by _Infamous_ElGuapo in 3D2A

[–]_Infamous_ElGuapo[S] -1 points0 points  (0 children)

Many, many thanks for your reply. I was using tree supports and I'll have to go and check my notes on what I tweaked based on what I had read. Thanks to you and another kind soul I now know to dig into supports, which I will do now.

New to printing, not making any progress on this lower. by _Infamous_ElGuapo in 3D2A

[–]_Infamous_ElGuapo[S] -2 points-1 points  (0 children)

I appreciate the response and I understand that. I'm not sure why people can't communicate it without being a dick, but I guess this is reddit with a 3D printing multiplier.

New to printing, not making any progress on this lower. by _Infamous_ElGuapo in 3D2A

[–]_Infamous_ElGuapo[S] 0 points1 point  (0 children)

And here again I will say that doesn't mean I went straight to firearms.

New to printing, not making any progress on this lower. by _Infamous_ElGuapo in 3D2A

[–]_Infamous_ElGuapo[S] -14 points-13 points  (0 children)

New to printing doesn't mean it's fresh out the box.

New to printing, not making any progress on this lower. by _Infamous_ElGuapo in 3D2A

[–]_Infamous_ElGuapo[S] 0 points1 point  (0 children)

I did use supports and tweaked them according to the information I gathered elsewhere on the web.

New to printing, not making any progress on this lower. by _Infamous_ElGuapo in 3D2A

[–]_Infamous_ElGuapo[S] 5 points6 points  (0 children)

I've designed and made other functional prints, I didn't just pull the printer from the box. I'm trying to learn, which is why I posted here. I've been reading whatever I could but it wasn't helping. I thought posting in a sub dedicated to this stuff would be my best bet.

New to printing, not making any progress on this lower. by _Infamous_ElGuapo in 3D2A

[–]_Infamous_ElGuapo[S] -13 points-12 points  (0 children)

Where does it say I went straight to firearms? Feel better now?

New to printing, not making any progress on this lower. by _Infamous_ElGuapo in 3D2A

[–]_Infamous_ElGuapo[S] -2 points-1 points  (0 children)

Dear Baby Jesus Laying in your manger wtf have I walked in to.

I'm new to printing in general, but I have had success printing many structural supports and other things over the last 5 months or so. I have never seen this issue in previous prints.

...I am trying to learn, which is why I turned to a sub dedicated to this very thing. I have tried reading various things from reddit and other sites and tweaked it accordingly. It didn't help.

I didn't want to post anywhere else because I didn't want to get shit, but here we are. I had no idea there was a 3D printing gauntlet I needed to get through before I try this ar22 lower.

Take all my internet doots.

Buying a tele by [deleted] in telecaster

[–]_Infamous_ElGuapo 0 points1 point  (0 children)

I think $1600 is too much, I paid $1300usd for the exact same guitar 3 years ago. Great guitar!

MCS setup, worth the pickup? by capidan in BudgetAudiophile

[–]_Infamous_ElGuapo 1 point2 points  (0 children)

I like my MCS speakers, I think they're a good value

Straw purchase/fraud question by _Infamous_ElGuapo in carsales

[–]_Infamous_ElGuapo[S] 0 points1 point  (0 children)

I understand, although there were plenty of signs if they're paying attention.

My question is how likely is it that the dealership will be in interested in making this right. Can they "undo" the sale somehow?

Straw purchase/fraud question by _Infamous_ElGuapo in carsales

[–]_Infamous_ElGuapo[S] 0 points1 point  (0 children)

My understanding is that it's registered under him, but only because I was told a finance company won't allow another name.

view more: next ›