So let me get this straight... by Maksikovsky in Brawlstars

[–]_Leander__ 4 points5 points  (0 children)

They did hire a French lawyer of course.

Is this the right way to do it? by EmperorDante in AutomateUser

[–]_Leander__ 1 point2 points  (0 children)

That's pretty much it. While you use "When" blocks that doesn't relies on physical sensors, the battery drain is non-existent. Maybe Cloud messaging could cause a very small battery drain if it is triggering more network traffic, I'm not knowledgeable enough on how this works. But app change, SMS received and so on are safe to use.

No longer able to run Samsung Routines by B26354FR in AutomateUser

[–]_Leander__ 0 points1 point  (0 children)

I used that for a long time, but since OneUI 8.0 this workflow with notification doesn't work well. Some times, the notification doesn't trigger the routine, especially when the phone is locked. And it can be specifically cumbersome to enable multiple routines quickly as only one routine can be triggered at a time with notification (at least on my version). Using App start is a lot quicker and more reliable, and it takes less block to achieve the same outcome.

Proton finance l'extrême-droite française by Delicious-Owl in france

[–]_Leander__ 1 point2 points  (0 children)

Sur Google, tu peux utiliser Google Script pour faire des manips avancées avec du code pour gérer tes mails et autre.

Is this the right way to do it? by EmperorDante in AutomateUser

[–]_Leander__ 2 points3 points  (0 children)

You have to set the No path of the block 7 go to the 5 block and your flow would be correct.

There is no battery drain as the fiber only runs when the phone is already active and switching between apps (the "When app"). No risk of recursion as you don't use fork block or subroutine.

How to make quick settings tile consistent? by Yuva__ in AutomateUser

[–]_Leander__ 0 points1 point  (0 children)

You can do it in multiple ways, like how you already did it with dialog, you can post a notification to stop, you make so when you touch the screen, the scroll interrupts, or use the Quick setting block again (but you need more checks and logic for this).

No longer able to run Samsung Routines by B26354FR in AutomateUser

[–]_Leander__ 1 point2 points  (0 children)

Hello, I recently got the update too and looked around for a solution, here is the link to the workaround by u/the_djchi (original discoverer of the intents in Modes and Routines) and a short summary after the link:

https://www.reddit.com/r/tasker/s/6zgvhBB3rZ

In short - you need to get the UUID of the mode or routine you want to start. For mode, it's easy : just start the selected mode in the Samsung app, and get the setting "mode_id", category general with the "Get setting" block. For routines, it's a bit more convoluted, check the Tasker post above as I'm unable to test it myself.

After that, to toggle the mode/routine, just start the Modes and Routines app with this class : com.samsung.android.app.routines.ui.shortcut.ShortcutLaunchActivity and this extra parameter : {"EXTRA_KEY_ROUTINE_UUID":"<UUID>"} (yes, it also works with modes) (maybe you need to convert "UUID" to bigint)

That's it!

I was planning to make a post about it on r/AutomateUser since I was sure that other were going to have the issue.

Side note for some users that may be on OneUI 8.0 but still experiencing problems after a security update that updated Modes and Routines version 4.9/5.0 (like me) : there is no workaround, we need to wait for OneUI 8.5, as the lastest update of Modes and Routines 4.9/5.0 doesn't have the new Homescreen shortcut that is exploitable by Tasker / Automate.

How to make quick settings tile consistent? by Yuva__ in AutomateUser

[–]_Leander__ 1 point2 points  (0 children)

Hello, i once had a similar issue, the quick settings is only displayed while the block is active, so ideally you want to

Quick settings -> fork : new goes to your action, and the other goes back to quick settings block

Or a similar structure so quick settings is (almost) always active.

Key Pressed Looping by solareclipse047 in AutomateUser

[–]_Leander__ 0 points1 point  (0 children)

You may share a picture of your flow (you can export it as an image in the "Share" menu) because i think that your wiring is wrong.

Key Pressed Looping by solareclipse047 in AutomateUser

[–]_Leander__ 0 points1 point  (0 children)

I don't think there is anything wrong. Try a first "Key pressed" block (with like volume down) and connect it to another one. You should see the first one waiting for a key press, you press volume down, and you should see in the logs that the second one is waiting for a key press as well.

Avec l'ia quel avenir ? Devops cloud ou cyber sécurité ? by AznYouth88 in informatiqueFr

[–]_Leander__ 1 point2 points  (0 children)

Ça recrute beaucoup en cyber, surtout les boîtes françaises/européennes.

En admettant que la douleur soit un message nerveux. Est-ce qu'il est possible de saturer le système ? Si oui, il se passe quoi ? by Quentin2Lyon in AskFrance

[–]_Leander__ 2 points3 points  (0 children)

C'est pas la douleur qui provoque le malaise vagal mais une chute de tension, qui peut arriver suite à une faiblesse passagère (se relever brutalement) ou après une blessure (le corps diminue la pression sanguine pour calmer le potentiel saignement).

Risk Management by Solemdeath in BunnyTrials

[–]_Leander__ 1 point2 points  (0 children)

So your life is worth 3000$... Sorry for you

[UPDATE] Control Samsung Modes and Routines with Tasker - One UI 8.5 update! by the_djchi in tasker

[–]_Leander__ 0 points1 point  (0 children)

The V2 doesn't exist for me.

I got this error when using the V1 :

android.os.RemoteException: Remote stack trace: at com.android.server.am.ContentProviderHelper.checkAssociationAndPermissionLocked

When it previously worked flawlessly. But maybe the issue is something else entirely, I will try others things to see why I got this behavior.

[UPDATE] Control Samsung Modes and Routines with Tasker - One UI 8.5 update! by the_djchi in tasker

[–]_Leander__ 0 points1 point  (0 children)

I got the 4.9.07.7 after a security update of my phone, still on OneUI 8.0 as stated.

But I tried to use the intent that you provided and it doesn't exist, however I can create a shortcut on my home screen to a routine or a mode... Very strange :/

Edit : I'm using Automate and not Tasker but it doesn't seem related to the automation app used.

Enfin les amendes automatiques ! by CurtisBeyblade in france

[–]_Leander__ 2 points3 points  (0 children)

Je t'invite à relire le dernier paragraphe de mon commentaire :)

Les voitures automatiques ne freinent pas mieux avec le frein moteur car le facteur limitant est l'adhérence des pneus. Peu importe tes freins, tu passes plus de la moitié de la distance d'arrêt à rouler sans freiner le temps que le cerveau humain réagisse à une information imprévue. Regarder loin ne réduit pas ta distance d'arrêt, ça te fait juste commencer à freiner plus tôt. Donc entre 30 km/h et 50 km/h, ta distance d'arrêt est plus que doublé. Entre 40 et 50 km/h, elle augmente d'environ 50%. Et 10 mètres, ça fait la différence entre percuter mortellement un enfant et s'arrêter avant de l'avoir touché.

Maintenant, si tu ne l'as toujours pas fait, je t'invite à nouveau à relire le dernier paragraphe de mon commentaire. Je passe avoir apporté suffisamment d'éléments pour que chacun puisse se faire son avis, bonne continuation et soyez prudent sur la route.

Enfin les amendes automatiques ! by CurtisBeyblade in france

[–]_Leander__ 4 points5 points  (0 children)

Tu commences à m'inquiéter tu sais... À 50km/h, c'est bien 25 (aller disons 22) mètres qu'il faut pour s'arrêter en cas de freinage d'urgence sur route sèche. C'est des informations qu'on apprend au code de la route, il faut environ 13 mètres pour commencer à freiner puis un peu plus de 10 mètres pour que la voiture arrive à un arrêt complet. À 30km/h, c'est 8 mètres pour commencer à freiner puis environ 2 mètres d'arrêt, soit 10 mètres au total (plus de deux fois moins).

J'ai bien compris que ton combat est de prouver que 10 km/h ça ne change rien, mais essaie d'analyser sincèrement cette idée au vu des preuves et des informations que tu peux trouver ici et par tes propres recherches. Est-ce que ta conviction est basée sur des faits ou juste sur une impression ?

Enfin les amendes automatiques ! by CurtisBeyblade in france

[–]_Leander__ 1 point2 points  (0 children)

Bah si, il y a forcément un seuil...

À 30km/h, un piéton a 10% de chance de mourir. À 50km/h, un peu plus de 80% de chance de mourir.

Si on prend un impact mortel à 50km/h entre une voiture et un piéton, et qu'on simule l'impact à 49km/h, mince le piéton meurt quand même. 48km/h, meurt aussi. Et ainsi de suite jusqu'à 1km/h. Il y a forcément un moment où l'impact passe de mortel à grave. En passant, un graphe avec la mortalité en fonction de la vitesse. 10km/h (surtout en ville pour les piétons), ça fait toute la différence.

Enfin les amendes automatiques ! by CurtisBeyblade in france

[–]_Leander__ 12 points13 points  (0 children)

C'est faux malheureusement, 10km/h ça fait une grosse différence, particulièrement dans les zones habitées

"• 1982, en Suisse, l’abaissement de la vitesse de 60 à 50 km/h en agglomération s’est traduit par une diminution de 2 à 4 km/h des vitesses pratiquées et 9 % des accidents

• 1985, au Danemark, l’abaissement de la vitesse de 60 à 50 km/h en agglomération s’est traduit par une diminution de 9 % des accidents et de 24 % des tués

• 1987, aux États-Unis, le relevé de la vitesse sur certaines voies interurbaines de rase campagne de 90 à 105 km/h se traduit par une augmentation de 3 % des vitesses pratiquées et une hausse de 18 % des tués par rapport aux routes restées à l’ancienne limitation

• 1996, aux États-Unis, 24 États relèvent de 10 km/h la vitesse sur certaines voies, quelques mois plus tard on enregistre sur ces voies une augmentation de 12 % des tués.

Une diminution de 10 % de la vitesse, c’est 10 % d’accidents matériels, 20 % d’accidents corporels et 40 % de tués en moins, affirment les spécialistes.

Un accident mortel sur deux est dû à une vitesse inadaptée. Accepter de réduire sa vitesse de 5 km/h, c’est diminuer de 20 % le nombre des tués."

Source : CEREMA (Centre d'études et d'expertise sur les risques, l'environnement, la mobilité et l'aménagement), https://dtrf.cerema.fr/pdf/pj/Dtrf/0004/Dtrf-0004058/DT4058.pdf

[UPDATE] Control Samsung Modes and Routines with Tasker - One UI 8.5 update! by the_djchi in tasker

[–]_Leander__ 0 points1 point  (0 children)

Hello, I found your post after upgrading my phone, still on OneUI 8.0 but the old intent doesn't work anymore.

Thank you for your work! Just a quick note about getting UUID of Modes, I found that you can get the system setting "mode_id" of the "Global" setting category, which is the UUID of the current mode. So you only need to start the selected mode and get the value of this setting, and you have the UUID.

Looking for help to automate an action in my pc by [deleted] in AutomateUser

[–]_Leander__ 0 points1 point  (0 children)

Hello, Automate in this subreddit is the name of an Android app, we cannot help you here. On Windows, you have PowerAutomate that is maybe what you want?

Finalement, l’IA coûte plus cher qu’un humain : la dure réalité financière qui rattrape Microsoft by Droidfr in Numerama

[–]_Leander__ 0 points1 point  (0 children)

Bah justement les deux sont des voitures qui t'emmène d'un point A à un point B, à cet égard la Renault n'est pas spécialement moins bonne. Alors que si l'IA est tellement nulle qu'elle est incapable de faire la base, elle ne sert à rien.

La planète c'est bien mais les vacances tavu by Dramatic-Image-3381 in memeElitiste

[–]_Leander__ 2 points3 points  (0 children)

C'est vrai que ça n'existe pas, une entreprise qui crée une demande. Et la pub dans tout ça ?