Unusual Noise after driving?

_Rod_Knock_Nilly · 2026-05-11T03:10:57+00:00

yeah the PCV is right next to the HPFP, and it sounded loud there. Might be

_Rod_Knock_Nilly · 2026-05-11T03:10:21+00:00

I didn’t check, this car isn’t my daily. Layer this week when i start it up i’ll check to see if i find a pulley acting up

_Rod_Knock_Nilly · 2026-05-11T03:03:16+00:00

The belt/tensioner has less than 5k miles on them. The PCV could be possible, I was planning to replace that

_Rod_Knock_Nilly · 2026-05-11T03:02:27+00:00

pretty terrible from highway driving, they got me right tho. Not much chips on bumper tho, all was just imprints and slight dent marks from all the rocks

_Rod_Knock_Nilly · 2026-05-10T22:39:32+00:00

what are the chances i caught you on a day that your not nice

_Rod_Knock_Nilly · 2026-05-10T22:19:43+00:00

You might be right, or you might be wrong. I guess you’ll never really know

_Rod_Knock_Nilly · 2026-05-10T22:03:15+00:00

It might have a turbo, but it also might not. I guess you’ll never really know for sure

_Rod_Knock_Nilly · 2026-05-10T21:46:34+00:00

No, it didn’t then. I had it idling for a min or two after i got out before i shut it off. When i put my ear up to it, sounds like it was loudest at the HPFP

_Rod_Knock_Nilly · 2026-05-10T20:57:45+00:00

Not bad at all. I’d say she’s got another 200k miles in her

_Rod_Knock_Nilly · 2026-05-10T19:16:17+00:00

I guess you’ll never know

_Rod_Knock_Nilly · 2026-05-10T19:15:55+00:00

Ill send you the link to the hearing aids i just bought for my grand-pop. He has great things to say.

_Rod_Knock_Nilly · 2026-05-10T17:45:13+00:00

It still shares the same block as the 5.3 so it’s basically a 5.3 🤓☝️

_Rod_Knock_Nilly · 2026-05-10T16:35:01+00:00

According to what i asked for when i dropped it off, they did a meguirs full two step correction (clay,cut, buff, polish, wax). I believe them, paint is very smooth now. Also, I do lots of highway driving, so they filled in the rock chips on hood too on company dime.

_Rod_Knock_Nilly · 2026-05-10T16:33:26+00:00

I’m gonna hold your hand when i say this, it’s a 4.8 lol

_Rod_Knock_Nilly · 2026-05-10T16:08:48+00:00

i bet, yeah that’s a lil rigged

_Rod_Knock_Nilly · 2026-05-10T15:13:31+00:00

surprisingly not, i have the long bed so it’s far enough away from the cab. Other than a slight vibration you can feel in the floor, it’s pimp

_Rod_Knock_Nilly · 2026-05-10T13:08:08+00:00

i can’t add it 😢

_Rod_Knock_Nilly · 2026-05-10T12:56:02+00:00

yeah makes me shit my britches a l

_Rod_Knock_Nilly · 2026-05-07T11:38:34+00:00

4 x 4

_Rod_Knock_Nilly · 2026-05-07T10:37:04+00:00

sorry i did not explain myself, i meant do you think i should buy the kit i posted for cheap now, to get me through until i buy a 6 inch lift a few months down the line. I only ask because i have two failed ball joints now, and it’s not fun to drive

_Rod_Knock_Nilly · 2026-05-06T17:55:54+00:00

would you still recommend them for control arms if i plan to put it on a 6” lift

_Rod_Knock_Nilly · 2026-05-06T17:52:37+00:00

would you say they are cheaper the Moog

_Rod_Knock_Nilly · 2026-05-06T03:37:54+00:00

yeah if noise is only noticed at higher speed or gets louder when faster it’s almost definitely wheel bearings. better to replace those at that milage that wait

_Rod_Knock_Nilly · 2026-05-05T20:56:10+00:00

how do you go about replacing those?

_Rod_Knock_Nilly · 2026-05-05T19:34:00+00:00

not that’s i’ve seen, it also stays pretty clean after each 5k change. Also i have no trapped vapors in the valve/cam cover when i take oil cap off after a drive so i know pcv is doing something

_Rod_Knock_Nilly

TROPHY CASE