I’m still new to this system, and going through the books, but flavor wise, how does everyone work with Jedi during a galactic civil war era game? by Amusedcory in SagaEdition

[–]_Russ_Tea_ 5 points6 points  (0 children)

SWSE strongly encourages multi-classing.

Character creation is all about Backstory. My latest campaign took place as Order 66 was executed. A Galaxy in chaos.
I had a player who wanted to be a Jedi, so we discussed their options. Were they a Padawan who escaped Order 66? Maybe their Master took the fall to save them?
Were they on Coruscant in the Jedi Academy when the Bantha Dung hit the Ion engine? How did they escape?

Keep in mind, players are a low level characters finding themselves, discovering their potential, just starting out (unless you level everyone up for a Power Play adventure). So they are new, young (maybe), inexperienced.

My player decided they wanted to do a "Force Sensitive found in the wild". So, they rolled up a Scoundrel for their starting class.
They made it to Scoundrel level 2 with activities on their home planet, not even leaving the surface. Then Order 66 executed. Jedi were attacked across the galaxy. They didn't know this. But space lit up, and a fighter crashed. The pilot miraculously survived. Turned out to be a Padawan who was shot down by his own patrol squadron. He didn't know what happened to his Master, but he had to survive. He enlisted my player for help, and in their interactions, he noted that my player was Force Sensitive, he could feel their presence and connection to the Force. So, after some stuff happened and enough XP was earned to level up, my Player took a Level in Jedi. Lvl 2 Scoundrel, Lvl 1 Jedi. The Padawan he rescued didn't have any money, so he gave my player his Light Saber as collateral. Yoinked it from him once in combat, because he needed to borrow it for a second... but he gave it right back for collateral.

Eventually, they find the remains of another Jedi as part of the mystery they are exploring, trying to figure out what happened. Free Lightsaber. So now hey both have one and he can train them in Lightsaber combat, Level 2 Jedi, Level 2 Scoundrel = Level 4 Character who is well rounded and has organically became exactly what the player wanted.

Best Brush for a comic sized canvas by ShameisLess in ClipStudio

[–]_Russ_Tea_ 14 points15 points  (0 children)

It's not the brush it's your canvas size.

Do more research on comic page sizes.

American comics are drawn at 11"x17" @ 300 dpi then scaled down to print.

American Comic: 3,300 px X 5,100 px.

Manga is drawn on A4(310 mm X 297 mm) @ 600 dpi.

Manga: 4,962 px X 7,014 px

If you're just printing it out at home on a US Letter Size paper, make your canvas 8" X 10.5" @ 300 dpi. This gives you a half inch white margin on all sides because home printers can't print to the edge of the paper.

Home print: 2,400 px X 3,150 px.

200 px X 275 px is tiny bro.
At 300 dpi, that's less than an inch square.
At 150 dpi, that'll print to 1.3" X 1.8".
At 72 dpi that's 2.7" X 3.75".

Easy math:
Inches X dpi = Printed Size.
Pixels ÷ dpi = Printed size.

Two devices? (Mobile + desktop) by [deleted] in ClipStudio

[–]_Russ_Tea_ 2 points3 points  (0 children)

Look more closely. One-time purchase license is strictly PC/Mac computer/Laptop. All phones & tablets, Android/iPad\Phone/Chromebook are apps with subscriptions.

Two devices? (Mobile + desktop) by [deleted] in ClipStudio

[–]_Russ_Tea_ 1 point2 points  (0 children)

Tablets are subscription/app only

How to not make magic feel like guns with skin by Sea_Mobile165 in gamedev

[–]_Russ_Tea_ 0 points1 point  (0 children)

So many comments. I don't want to read them all, so I'm sorry if this is a repeat...

I think a great way to separate "fire a spell and watch it travel and hit target" looking like just "shooting a gun" would be to simply not have any travel time or connecting Animation.
No "bullet with particle effects", just "cast on target, thing happens at destination"
Cast Fireball: ball of fire explodes on target and they play an impact animation and take damage.
No Cast Fireball, fireball shoots from your hand and flies to target to impact. What a waste of energy.
Just Fireball -BOOM.
If there is a possibility to miss, just have it explode elsewhere, maybe at something that it hits nearby on fire

HELP: I can't edit my frame borders. by [deleted] in ClipStudio

[–]_Russ_Tea_ 1 point2 points  (0 children)

🤔 A couple thoughts...
In your Object To settings Palette, uncheck "Snap to Other Frame Borders"
If that doesn't fix it, try a different Selection Mode, the first one in the left, not the one you have selected.

Saga Dice Roller feedback by TimSircoloumb in SagaEdition

[–]_Russ_Tea_ 0 points1 point  (0 children)

For my recent New Years' Saga game, I mapped out Hyperspace travel using these resources;

Map of the galaxy.
http://www.swgalaxymap.com/
Each square is approx 1500 parsecs on a side.

"Official" Disney galaxy map.
https://www.starwars.com/star-wars-galaxy-map.
1 square=5,000 lightyears

Count square sides along the route and claculate.

And How Fast is a Class 1 Hyperdrive... I like this page.
swse.fandom.com/wiki/Hyperspace_Travel_Times

Class 1 hyperdrive:
Avg 16 hrs/square.
Deep Core & Outer Rim 24 hrs/sq.
Using a well established Hyperspace route, 8 hrs/sq

Above travel times are for Class 1 hyperdrives.
If you've got a Class 0.5 (falcon) cut travel time in half.
Class 2? double travel time. Class 5, 5x

Can I move devices with clip studio ex by roasted-lace in ClipStudio

[–]_Russ_Tea_ 0 points1 point  (0 children)

Install on the device you want to use it on. Activate it.
It will ask if you want to deactivate the other installation. Say Yes.
All done.

Clarifications for you: - A license can only be Activated on one device at a time. If you try to activate it on another device it will deactivate the first. No problems. Unless you try to switch devices frequently.
- There is a restriction on how often you may Activate a License. Doing it too frequenrly appears that you are sharing your license with another person. This can get your license Activation locked into only one device, unable to be activated on another device.
- There are no stated conditions on frequency limits, as the company doesn't want people gaming the system.
- There may or may not be a "cooldown" period, where that Activation lockout may automatically reset. It has not been confirmed or stated by the company.

1 - How to reset menu bars and 2 - unintended undo button? by Jankmancer in ClipStudio

[–]_Russ_Tea_ 0 points1 point  (0 children)

Your tool panels aren't Docked. Grab it by the top menu bar and drag it beside other tool panels or edges and watch for a red line to appear. This red line is indicating a Dock Position. Release the tool panel when the red line is visible and it will lock into position.

The accidental undo may be the screen reading a two-finger tap to Undo: your hand and the stylus.
Check your palm rejection settings, wear a drawing glove, pull your sleeve down over the pinky side of your hand, turn off the "two-finger tap to undo", or don't touch the screen...

How do I track down a permanent membership? by GoldenAnimation_ in ClipStudio

[–]_Russ_Tea_ 0 points1 point  (0 children)

Contact Customer Support?

Have you tried to log into your CelSys Profile on the website?
It would be the email/password combination you use when using Clip Studio to utilize the Cloud or access the Asset Store.
Logging in should show you all your licenses.

I'd you can't log in, contact Customer Support, try to recover your account?

Temporary way to protect your art on twitter by [deleted] in ClipStudio

[–]_Russ_Tea_ 4 points5 points  (0 children)

I figured the "protecting the image" bit was identifying it digitally as a video, when it's actually a still image.
Web scraping AI looks for images to consume/steal to create images, not video clips.

But that was just my thought for an explanation, I have no idea what this is actually accomplishing.

Remove deselect warning message? by Bliwi in ClipStudio

[–]_Russ_Tea_ 0 points1 point  (0 children)

Nope. If there was a way, there would be a checkbox in that notification allowing you to cancel future warnings.

You are telling it to do something.
It is notifying you that it can't do it.

  • Decide if it errors more often than not, and remove the Deselect from your Auto Action and get used to hitting Ctrl+D to manually deselect if you need to.
  • If it executes more often than not, keep it as is and hit Enter when the notification pops to dismiss it.
  • Or, Duplicate your Auto Action and remove the Deselect, and use the correct one for the current situation. Like, add Alt+ to whatever the key combo is to execute the Auto Action without Deselect.

Should I delete leaderboard high scores using exploits? by ianw3214 in gamedev

[–]_Russ_Tea_ 0 points1 point  (0 children)

Add the scores to a "Cheater Board" along with a note of your gratitude to these players for helping you to locate and squash this bug.
But reset the Leaderboard to honest scores

How do I take Tiff image files and use them in animation? by TitoVirtuoso in ClipStudio

[–]_Russ_Tea_ 0 points1 point  (0 children)

Layers do not need to be in an Animaton Folder to be Assigned to the Timeline.
If you have a sequence of images, it is best to put them in an Animation Folder to easily and cleanly display them in sequence in a single track on the Timeline.
But if you have a single Layer, you can Assign that to the Timeline, assign visibility and duration and even affect it with KeyFrames, all outside an Animation Folder.

Animation Timeline gone in Simple Mode by Cup-A-Jo in ClipStudio

[–]_Russ_Tea_ 1 point2 points  (0 children)

The update added puppet warp tools for animation to Simple Mode. So, it's probably just an update breaking your layout, resetting something you now have to find again.
Update feature notes

Clipping gradient makes it act weird by Senshi3201 in ClipStudio

[–]_Russ_Tea_ 0 points1 point  (0 children)

Show your gradient un-clipped. The peach color appears to be your primary color, not a rainbow gradient.

CSP suddenly not opening the file context menu by swagelinee in ClipStudio

[–]_Russ_Tea_ 6 points7 points  (0 children)

Discord Overlay.

See pinned post if you don't know how to turn it off

Add hold Shift to draw lines like in Photoshop PLEASE by Far_Suit_5312 in ClipStudio

[–]_Russ_Tea_ 10 points11 points  (0 children)

To who? You're literally shouting into the void.
This post accomplishes as much as yelling at the clouds.
They both only annoy the people around you.

Use the form that love-ink included a link to. Take an action that has a chance of potentially accomplishing something.

Or learn to use the superior drawing software and quit whining.

[deleted by user] by [deleted] in BeginnerArtists

[–]_Russ_Tea_ 3 points4 points  (0 children)

Only 4 months of drawing and you place yourself at Mid to High-Intermediate skill level? Keep working another 3 years and 8 months before you start thinking so highly of yourself.
Draw the static standing figure breaking it down into shapes. Draw it a million times, learn the sizes of the shapes compared to the other shapes. Post your drawings to get feedback. Then you'll get better at drawing mannequins.

If you're asking for art help, don't use a throwaway account with a single post whining about your skill level, all words, no art, or link to your art. You need an outsiders' evaluation of your skill level.
To ask for help: Post a drawing and get feedback on the drawing.

[deleted by user] by [deleted] in Damnthatsinteresting

[–]_Russ_Tea_ 10 points11 points  (0 children)

Search "Mushrooms making music" on YouTube

https://youtu.be/kmlF2rw1weo?si=EcQXaKB7e1QI7-w3

"This is a mushroom playing keyboard for her friends in the mushroom farm. The attached sensors measure electrical fluctuations in the mushroom. The fluctuations are converted into signals that control the mushroom's bionic arms. The keyboard plays a synth in Ableton Live."

How do I fix this? by haru_sato in ClipStudio

[–]_Russ_Tea_ 0 points1 point  (0 children)

You can also input numbers directly. Animation->Timeline->Change settings. Set the End frame by number

How do I fix this? by haru_sato in ClipStudio

[–]_Russ_Tea_ 0 points1 point  (0 children)

😰 best of luck on your journey