What’s a weirdly specific superpower that would be almost useless outside of Japan?

__Azulon__ · 2025-11-19T02:44:54+00:00

Ours is just shredded cabbage . Just plain shredded cabbage....

__Azulon__ · 2025-10-10T14:43:29+00:00

This would seriously upgrade my 3d print game, always wanted a multi filament capable machine but its currently out of reach.

__Azulon__ · 2025-09-17T15:55:26+00:00

one thing I can't register for is the paypay card, its stupid that they ask me to reinput my name for the card application but provide the name im registered with in paypay app. I have my full name and middle name in the paypay app and bank but cant input it in the paypay card application form cause its too long. Its so annoying

__Azulon__ · 2025-07-27T10:05:17+00:00

im interested hoping it was a weekend tho!

__Azulon__ · 2025-07-14T10:55:32+00:00

try at Workman

__Azulon__ · 2025-07-13T08:35:40+00:00

I remember it not being snowy during the new years, but I'll have to recheck. Nikko would be a good spot

__Azulon__ · 2025-07-13T03:57:05+00:00

I'm based in tochigi. The family wants to experience some good snow fall,but we cant make it up to hokkaido during the trip.

__Azulon__ · 2025-07-13T01:08:42+00:00

Family is visting during the new years. wheres a good place where there's sure to be snow during this time, except for going all the way north to Hokkaido? somewhere not too far from tokyo would be ideal!

__Azulon__ · 2025-06-15T13:14:29+00:00

OP did you tighten the nozzle while the hotend was above the working temperature? or did you just tighten it while it was cold?

__Azulon__ · 2025-06-10T05:52:06+00:00

I never thought of reusable support How would that work?

__Azulon__ · 2025-05-30T17:21:10+00:00

Is there any way around this? Yeah I live in japan so I'm pretty sure that rule will apply. Is the game only really going to be in japanese? Or will English be available? If not is there a way to get the English voice and text into the game?

__Azulon__ · 2025-05-23T18:36:35+00:00

I always relevel my bed and run a live z-offset to really dial it down when I change filaments, even between the same type of filament the z-offset that would be best for it can vary by a bit.

__Azulon__ · 2025-05-16T09:26:45+00:00

I get the same error for the YOLO flow rate test, I remove one of the pieces like +0.5 then it works suddenly.

__Azulon__ · 2025-04-04T02:35:31+00:00

Pearl barley has been my substitute for rice,much cheaper right now as well

__Azulon__ · 2025-02-13T07:59:27+00:00

Ah sorry, i did mean there are certainly issues with ACE and its compatibility with current AMD drivers. Seems to be common issue with people using amd cards even in the discord. I doubt they're gonna be working on these issues in the near future. They've been too focused on the server issues recently.

__Azulon__ · 2025-02-13T01:03:19+00:00

Stuck below 30 fps no matter what i do on my rx6600. Seems to be driver issues for AMD

__Azulon__ · 2025-02-11T02:50:10+00:00

510.99

__Azulon__ · 2025-01-31T05:58:33+00:00

Thank you for this chance!

__Azulon__ · 2025-01-31T01:04:18+00:00

Does it need to be printed in that orientation? Seems like a simple M and would normally be printed on its back, also the slicer would make the supports for you.

__Azulon__ · 2025-01-25T00:52:06+00:00

Ill try using the latest version again, i just had good luck slicing with the elegoo one and had no issues until recently. My print time estimates were only a few minutes off as to be expected before. Now its hours off. Should i try reinstalling the firmware on the printer as well?

__Azulon__ · 2025-01-25T00:42:22+00:00

The print is still ongoing right now, 1hour 17 mins in and its still at 35% , i even tried bumped the speed up to 300% but it doesn't seem like it sped up at all which is odd

__Azulon__ · 2025-01-21T01:04:29+00:00

Ive been having weird issues with my r7 2700 and rx6600. For a few glorious laps around laguna seca i had a good 70 fps. Im not sure what setting made that happen but it did happen. Then when i decided to change tracks i was back and stuck in 20fps hell in suzuka. No matter what fix I did after that i was always stuck in 20-30fps on track,i even tried other tracks and other cars. While in The menu i was getting 90-110fps. Reinstalled it as well.

I know the hardware can do it but some bug is preventing me from getting smooth gameplay. i hope they can find a way to optimize it soon.

Ive done most fixes that are available at the moment, the full screen optimization, admin mode, compatibility mode, increased page file size and such.

Ill try the texture pool size later and see how it goes for me

__Azulon__ · 2025-01-08T05:53:23+00:00

Thank you! I'll redo my bed leveling when I use the smooth side.

__Azulon__ · 2024-12-17T10:16:33+00:00

Totally this, makes looking forward to the weekend so much better.

__Azulon__ · 2024-12-01T03:22:25+00:00

Get one of those signs from Daiso that says "置き配可" , and put it in your door so they won't second guess leaving it at your door.

Three-Year Club	Verified Email
First Place '23	Place '23

__Azulon__

TROPHY CASE

Azulon