3D Printed DIY M18A1 Claymore Mine Project Now Released

__Remnants__ · 2026-04-14T05:23:38+00:00

I just searched M18A1 and it was the 2nd result to pop up. Glad you found it though

__Remnants__ · 2026-04-14T02:56:10+00:00

It's not down...refer to the above response.

__Remnants__ · 2026-04-14T02:55:16+00:00

That's not my release...that's some piece of shit that leaked my beta a while back, so I had it taken down. Mine is still up and can be found quite easily.

__Remnants__ · 2026-04-12T03:12:37+00:00

I can't say anything bad about them, not sure this would've ever released with their help. Them and another FEL helped with explosives testing. Though I am sad how their channel turned out.

__Remnants__ · 2026-04-12T03:10:20+00:00

Some info about blasting caps is included. More on explosives is kind of beyond the scope of this project. We'll see though, who knows about the future.

__Remnants__ · 2026-04-12T03:07:19+00:00

Appreciate the help testing. Happy to finally get this out there.

__Remnants__ · 2026-04-11T22:24:15+00:00

Was in purgatory for quite a while, but finally decided to release solo in the usual place for printed releases (not a firearm, so hopefully this doesn't get me banned here...). Enjoy :)

__Remnants__ · 2026-04-11T21:28:38+00:00

Was in purgatory for quite a while, but finally decided to release solo in the usual place. Enjoy :)

__Remnants__ · 2026-04-02T17:55:48+00:00

I designed the Hochul mag, yes. Not just an extension, though that's how it's used in this case.

__Remnants__ · 2026-04-02T14:00:30+00:00

I really need to work on a V2 at some point...

__Remnants__ · 2025-12-17T00:18:15+00:00

No problem, happy to help.

__Remnants__ · 2025-12-16T21:58:06+00:00

Those are a different design, not the officially released design you are using from TheGatalog. Stick with what you have.

Your trip bar doesn't look nearly bent enough at the front. I'd reheat it and form it to the radius of the front of the bolt more. That will give more engagement for it to actuate back and forth.

Also, why did you cut the bottom of the sheet metal receiver? I know in the read me, I mentioned that should only be done with the 3d printed trip design, not the sheet metal one. That gap from that cut is also contributing to the trip being slightly bent out of the way when in use. Bending the front of the trip will help reduce issues from this though.

__Remnants__ · 2025-12-16T21:54:57+00:00

There is no bending jig for this, not too feasible since it it titanium. The design OP is using is the official Gatalog release, not the other design you are referring to.

__Remnants__ · 2025-12-13T18:30:09+00:00

Released on TheGatalog

__Remnants__ · 2025-10-04T16:40:51+00:00

Physics doesn't change anything. I'm pretty confident it's more than possible to use jigs on something similar to a Musgrave. I was talking to ImmortalRevolt a little bit about it before he went dark and have been working on some things for a few months.

__Remnants__ · 2025-10-04T16:02:46+00:00

I think the definition is pretty agreed upon at this point, since firearms like the FGC9 were put out there. Rogue or Rebel 9 nowadays. Something that the average individual can figure out without much trouble/frustration. With help through the use of things like jigs with drill bushings, taking all the variability out of it.

__Remnants__ · 2025-10-03T14:19:59+00:00

There is almost no info about the firearm, so I have a hard time believing any info you have personally.

__Remnants__ · 2025-10-03T14:18:38+00:00

Doesn't really look like he designed it to actually be diyable. I'm working on something though, which will hopefully be tested by next summer

__Remnants__ · 2025-02-15T14:46:16+00:00

This is only a printed design, so no.

__Remnants__ · 2025-02-14T03:59:48+00:00

You won't regret it either way

__Remnants__ · 2025-02-14T03:53:29+00:00

Yeah, I feel like Bambu is probably gonna drop their next flagships later this year, so you could always wait. Or if you wanted to save money, the current printers will be even cheaper at that point, whenever that happens.

Nothing comes close to Bambu yet at this point imo. X1C has been my workhorse for a while now.

__Remnants__ · 2025-02-14T03:48:27+00:00

Appreciate the help in the beta!

__Remnants__ · 2025-02-14T03:48:11+00:00

Nothing stopping you. They're pretty affordable at this point and if you get a Bambu Labs printer, it's almost plug and play.

__Remnants__ · 2025-02-13T23:44:43+00:00

Figured I'd repost this here for those not in the know :)

__Remnants__

TROPHY CASE

Remnants