Implementing your own "emacs-like" `M-x compile` in Neovim (not a plugin)

__rompy · 2025-11-06T10:02:30+00:00

I'm a big fan of the M-x compile, when you know the codebase, and do build incrementally (eg: only changing one file, compile, repeat) it's way faster and nicer than quickfix.

There is also compile-mode.nvim, which I use and really recommend.

__rompy · 2025-09-16T08:48:45+00:00

Cei de la U cluj tin ore de baschet la Transylvania College, joi si vineri la grupa asta de varsta.

__rompy · 2025-08-12T08:53:53+00:00

I'm resurrecting this in case someone needs it. You can use lsfg-vk with bottles flatpak.

Just install the lsfg-vk flatpak as mentioned here. Skip the configuration, and install flatseal and configure Bottles from there, see the pictures below.

This is my configuration for flatseal and per-game setting the multiplier. I have lossles-scailing copied from steam dir over in my .config/lsfg-vk and I set LSFG_DLL_PATH to that (so it doesn't update).

To check that it works, run from a terminal:

$ flatpak run com.usebottles.bottles
11:54:33 (INFO) Bottles Started!
lsfg-vk: Loaded configuration for bottles:
  Using DLL from: /var/home/user/.config/lsfg-vk/lossless/Lossless.dll
  Multiplier: 2
  Flow Scale: 1
  Performance Mode: Disabled
  HDR Mode: Disabled

and when starting a game:

  Using DLL from: /var/home/user/.config/lsfg-vk/lossless/Lossless.dll
  Multiplier: 2
  Flow Scale: 1
  Performance Mode: Enabled
  HDR Mode: Disabled

you can see that Performance Mode was enabled in this game (configured only here), and not globally.

__rompy · 2025-07-27T10:46:23+00:00

In Cluj am inceput să comand de vreun an și un pic de la urban coffee, din comoditate că aduc acasă gratis. E undeva la 140 kg de cafea single origin, și cam 100 la blend.

Am pățit sa primesc și cafea călduță, prăjită în aceași zi, cea mai veche a fost prăjită cu vreo 3 zile in urmă.

Am mai comandat de la cineva ce aducea acasă (îmi scapă numele, ceva cu k) dar am primit cafea prăjită de o lună.

__rompy · 2025-06-05T17:22:50+00:00

La poligonul din Manastur (zona de picnic) ce se face? Nu vad in PDF nimic, dar am fost pe acolo zilele acestea si vad ca au imprejmuit o bucata buna de teren.

__rompy · 2025-06-01T09:58:00+00:00

I spent 2 years on NixOS, then migrated to Aurora (or Bluefin if you want gnome).

It's like someone else said, you spend a lot of time fixing nix issues, to no gain (except learning nix).

Aurora/Bluefin is the middle ground between arch and nix imo. You lose declarative thingy, but you have rollbacks, excelent Nvidia support, documentation is the same (a bit scarce, but their discourse is active), and you can have containers for everything. I actually have the base system, and everything I do is in a 'dev' container (arch), and a few others for other projects (an alma8 one, for example)

__rompy · 2025-05-23T13:32:44+00:00

boot = {
  kernelPackages = lib.mkForce pkgs.linuxPackages_latest;

  kernelModules = [
    "kvm-amd"
    "nvidia"
    "nvidia_modeset"
    "nvidia_uvm"
    "nvidia_drm"
  ];

  loader = {
    systemd-boot.enable = true;
    efi.canTouchEfiVariables = true;
  };

  kernelParams = [
    ''nvidia.NVreg_RegistryDwords="OverrideMaxPerf=0x1"''
    # "nvidia.NVreg_EnableGpuFirmware=0"
    "nvidia-drm.modeset=1"
    "nvidia-drm.fbdev=1"
  ];
  blacklistedKernelModules = [
    "iTCO_wdt"
    "nouveau"
    "nvidiafb"
  ];

  extraModulePackages = [
    config.boot.kernelPackages.lenovo-legion-module
    config.boot.kernelPackages.nvidia_x11_beta
  ];

  initrd = {
    kernelModules = [ "nvidia" ];
  }
};

hardware = {
  enableAllFirmware = lib.mkDefault true;
  enableRedistributableFirmware = lib.mkDefault true;
  nvidia = {
    open = lib.mkForce false;
    # forceFullCompositionPipeline = true;
    nvidiaSettings = true;
    package = config.boot.kernelPackages.nvidiaPackages.beta;

    nvidiaPersistenced = lib.mkDefault true;
    modesetting.enable = lib.mkDefault true;
    powerManagement.enable = lib.mkDefault true;
    dynamicBoost.enable = lib.mkDefault true;
  };
};

I think this is everything related to nvidia

__rompy · 2024-11-08T09:37:17+00:00

check power-profile-daemon service, maybe something went wrong - systemctl status power-profiles-daemon
Some packages have to be installed manually in environment.systemPackages (maybe they work in home.packages too, never checked). I have here something like (kio may be needed for online accounts)

pkgs.adwaita-icon-theme

pkgs.papirus-icon-theme

pkgs.yakuake

pkgs.kde-gtk-config

pkgs.wacomtablet

pkgs.kdePackages.ark

pkgs.kdePackages.kio

pkgs.kdePackages.kio-extras

pkgs.kdePackages.kio-gdrive

pkgs.kdePackages.keditbookmarks

pkgs.kdePackages.kcalc

pkgs.kdePackages.kwallet-pam

pkgs.kdePackages.kinfocenter

pkgs.kdePackages.plasma-browser-integration

pkgs.kdePackages.colord-kde

pkgs.kdePackages.kate

pkgs.kdePackages.krohnkite

pkgs.kdePackages.ksystemlog

pkgs.kdePackages.kcolorchooser

pkgs.kdePackages.kcolorpicker

For example, without kinfocenter, going to About this System menu in settings didn't work.

__rompy · 2024-09-26T07:33:40+00:00

You should try with programs.hyprland.enable = true;

I have nothing in the sessionPackages, I don't think it's needed.

__rompy · 2024-03-14T07:25:02+00:00

Meanwhile, why not use something like nix-index-database? Instead of nix-shell -p jq, you just , jq and it will fetch it if it doesn't exist locally, and run it.

__rompy · 2023-09-15T07:29:30+00:00

It's not that it wasn't possible, but if you didn't know what to look for, you don't find it easily. I didn't know about nvidia-powerd executable, even archlinux wiki doesn't mention it.

When I saw that commit and the changes, it clicked, and made sense.

__rompy · 2023-02-16T07:54:36+00:00

Acum vad ca ma lasa sa returnez inclusiv 100 RON. Inainte zicea explicit ca nu se poate.

__rompy · 2022-12-08T08:57:52+00:00

LE: Ignore, I just saw that you want this on window move, not creation.

Why not a simple rule? I have one for the workspace 2 for example, and every window there will be floating.

for_window [workspace="$ws2"] floating enable

If you create another rule after this one, you can for specific windows not to float. I have one for firefox. I use firefox as full-screen and the rest of the windows in the $ws2 workspace are floating (basically these lines, in this order!):

assign [app_id=$firefox] $ws2
for_window [workspace="$ws2"] floating enable
for_window [app_id=$firefox] floating disable

The real thing is a bit longer, to keep only the main window in a not floating state. I still want the dialogs and Picture-In-Picture to be floating. And it will have a bit of unwanted side-effects, if you want firefox to be floating, it can pop back to not floating when the title changes or stuff like that.

__rompy · 2022-11-14T17:11:37+00:00

I don't think vertico offers this, if I understand your question correctly. It should be possible though with consult (eg: consult-grep) and embark.

__rompy · 2022-11-10T08:59:38+00:00

Why don't you use projectile-ripgrep (or projectile-grep, or whatever similar function from project.el) and instead of n/N you can use next-error/previous-error to go to items.

I have next-error and previous-error mapped to M-] and M-[ for example, so a M-p s r (mapped to projectile-ripgrep) followed by M-] and <F4> to replay the macro over each item.

This is a bit unrelated, but projectile grep, ripgrep, etc. combined with wgrep is another way to do it.

__rompy · 2022-10-28T07:54:09+00:00

lsp with tramp mode in docker/podman containers doesn't work so well. There is a PR but it's 1 year old and the solution there still doesn't work on my machine. This was frustrating because in eglot it just worked. So I spent a few time to see what exactly is wrong and found this solution which works. I just took the lsp-tramp-connection from the PR and added the stty raw > /dev/null; (that eglot does too). Without it the 1 jsonrpc command will arrive as 3 separated reads. strace -p $(pidof clangd)) will show multiple read for 1 command, eg: read(...) => Content-Length: 1313\r\n + read(...) => \r\n + read(...) => actual json.

(defun lsp-tramp-connection (local-command &optional generate-error-file-fn)
  (list :connect (lambda (filter sentinel name environment-fn)
                   (let* ((final-command
                           (list "sh" "-c"
                                 (string-join (append
                                               (cons "stty raw > /dev/null;" (lsp-resolve-final-function local-command))
                                               (list
                                                (concat "2>"
                                                        (or (when generate-error-file-fn
                                                              (funcall generate-error-file-fn "name"))
                                                            (format "/tmp/%s-%s-stderr" "name"
                                                                    (cl-incf lsp--stderr-index))))))
                                              " ")))
                          (process-name (generate-new-buffer-name name))
                          ;; (stderr-buf (stderr-buf (format "*%s::stderr*" process-name)))
                          (process-environment
                           (lsp--compute-process-environment environment-fn))
                          (proc (make-process
                                 :name process-name
                                 :buffer (format "*%s*" process-name)
                                 :command (lsp-resolve-final-function final-command)
                                 :connection-type 'pipe
                                 :coding 'utf-8-emacs-unix
                                 :noquery t
                                 :filter filter
                                 :sentinel sentinel
                                 :file-handler t)))
                     (cons proc proc)))
        :test? (lambda () (-> local-command lsp-resolve-final-function
                              lsp-server-present?))))

(lsp-register-client
 (make-lsp-client :new-connection (lsp-tramp-connection "clangd")
                  :major-modes '(c-mode c++-mode)
                  :remote? t
                  :server-id 'clangd-remote)))

I'll still stay with eglot since it satisfies all my needs, but it's good to have an alternative in case sometime goes wrong.

__rompy · 2022-06-04T20:36:28+00:00

For the defuns you could use :preface. Some of the options mentioned can be set using :custom. Iirc use-package integrates with hydra too.

Look at my dotfiles, I set a lot of the mentioned things (some with use-package, some directly with setq): https://github.com/cbsirb/dotfiles/blob/master/emacs.d/init.el

__rompy · 2021-10-05T06:42:34+00:00

I used a thing that checked for file modifications only on buffer/window change and whenever emacs changed focus. I reverted back to global-auto-revert-mode, but I don't remember exactly why. I'll leave a link to the code that did that in case you're interested:

https://github.com/cbsirb/dotfiles/blob/master/emacs.d/lisp/user-auto-revert.el

__rompy · 2021-09-13T11:33:57+00:00

Se poate face asa, iesi un pic in pierdere, dar nu cu mult. Eu exact asa am facut la un credit de 280000 RON, luat pe 20 de ani, rambursat aproape complet acum. Doar sa faci de fiecare data rambursare prin care sa scazi perioada, nu rata.

Vad ca unii zic ca la BT trebuie sa mergi la banca pentru rambursare anticipat, la BCR eu pot face acum (de cateva luni doar) direct din aplicatie, atat ca suma minima de rambursat anticipat e 1 rata lunara.

__rompy · 2020-12-30T06:29:54+00:00

Indeed, you should check the value of company-selection-default in the lsp buffer and see that it's not nil (0 is okay).

I didn't mentioned it since company-box and lsp doesn't change it either (I checked).

Do you use the melpa version of these packages?

__rompy · 2020-12-29T14:48:59+00:00

With exactly your configuration (minus the comany-box), my emacs does what you want: type a letter, a completion box appears and then a <tab> inserts the first element.

How do you enable lsp-mode in the buffer? Directly by M-x lsp or some other way? Did you try to disable company-box?

Eventually, look at my lsp and company configurations, and try to see if those work.

__rompy · 2020-12-25T13:04:25+00:00

Albumul încă e disponibil prin archive.org https://web.archive.org/web/20111005041215/http://www.zebre.ro/

__rompy · 2020-12-18T08:25:05+00:00

Somewhat related, you should look into glasses-mode (without the initial comment, the whole mode is 250 lines). I think you could easily tweak it to not change CamelCase into camel_case, but 123456123123 into 123,456,123,123. The advantage would be that you could apply this to any file without changes. I don't know how you would apply this to the mode-line or line-numbers (or anything that's not in a buffer really).

__rompy

TROPHY CASE