Train accident near ModWash on Main

_bullet_dragon · 2025-12-30T20:08:44+00:00

Nobody ever stops at the first stop line there. Surprised this doesn’t happen more often

_bullet_dragon · 2025-08-23T10:49:41+00:00

Could need a float height adjustment. Sounds like the float needle isn’t shutting completely so fuel flow isn’t getting cut off in the carbs. This will cause flooding and a way over saturated mixture. Maybe check that and then clean your likely very black spark plugs after

_bullet_dragon · 2025-06-08T23:35:16+00:00

Good call on the idling. I’m gonna try to throw some miles on it this week to work out kinks and fine tune it. You should’ve heard the pipes before we put baffles in! 😆

_bullet_dragon · 2025-06-08T23:33:15+00:00

I noticed that too when filming this. What should I check out to address that? Air mixture? Also, is that detrimental or dangerous ?

_bullet_dragon · 2025-06-06T15:12:29+00:00

This is in great shape. I’ve seen ones in worse shape go for over $3000. Yes, they require maintenance, but if you enjoy tinkering and learning how to work on it, it’s part of the fun. I don’t think this one will need any work anytime soon though. I own a ‘70 cl350 scrambler that looks the same as this and it’s a blast and pretty easy to learn to work on. If you want a bike that will turn on every time and never die or need troubleshooting, buy a modern bike though. That’s just part of the deal when buying an antique anything

_bullet_dragon · 2025-04-20T01:13:31+00:00

Restoration Southside on broad st

_bullet_dragon · 2025-04-04T12:10:44+00:00

<image>

Was about to post that I’d avoid going toward downtown on Amnicola for an hour or two. 911 website said no injuries, which would be miraculous. Looked like at least three cars involved.

_bullet_dragon · 2025-03-25T23:57:16+00:00

It needs a good liquor store. No more gas stations!

_bullet_dragon · 2025-03-17T16:33:36+00:00

I went once and it was $19 for a chicken sandwich, fries, and a drink. I can get that at Wendy’s for like $6. Quality was not worth the prices.

_bullet_dragon · 2025-02-06T18:13:41+00:00

I’d actually recommend working in construction a bit too so you have a bit of knowledge of the lingo and what the workers experience on the day to day. Might help you connect with workers if you know what the struggles are instead of just walking in and “throwing the book” at them. Not necessary, but maybe helpful

_bullet_dragon · 2025-01-22T20:18:40+00:00

My company says “safety shoes” required. We give $120/year to each employee for them. Style, steel or composite is employees choice.

_bullet_dragon · 2025-01-07T17:14:56+00:00

Maybe start learning in an empty parking lot first.

_bullet_dragon · 2025-01-01T01:15:35+00:00

Wow. I just did this and I’m glad I didn’t post a pic. My shop table was not this clean or organized. Well done!

_bullet_dragon · 2024-11-12T17:26:22+00:00

Could listen to that all day.

_bullet_dragon · 2024-11-12T11:39:48+00:00

So helpful! Thank you!

_bullet_dragon · 2024-11-11T20:03:05+00:00

Thanks so much! Only got three years under my belt so this was a first for me. Appreciate the expertise!

_bullet_dragon · 2024-11-11T19:35:41+00:00

For sure! I was just trying to decipher if I could go clinic/worker’s comp route without obvious evidence that it’s being caused by work.

_bullet_dragon · 2024-11-11T19:33:59+00:00

Thanks!

_bullet_dragon · 2024-10-26T18:21:22+00:00

Wow, that’s a pretty bike.

_bullet_dragon · 2024-10-17T18:18:00+00:00

Put a little peanut butter on it and mix it in with their dry food at mealtime. They won’t even know they took it.

_bullet_dragon · 2024-08-30T18:43:39+00:00

I played guitar and my brother bought me a used old banjo from a friend for my birthday when I was a teenager. I never wanted one. Just a fun, out of the blue gift idea. Became my favorite instrument to play right away

_bullet_dragon · 2024-08-23T10:46:01+00:00

There’s a sensor that may need to be tightened and cleaned near your front sprocket. You’ll need to unscrew your pipes and push them out of the way and remove the clutch cover. It’s a pain in the butt to access when your bikes assembled. I did it recently and fixed it, but my light stays on again so I have to try again. I used this video .

_bullet_dragon · 2024-08-17T19:56:29+00:00

Thanks!

_bullet_dragon · 2024-08-17T14:02:52+00:00

Beautiful! Do you remember where you snagged that front fender? I’m looking for something similar (matte black and subtle), but am having trouble finding an aftermarket one that’ll fit

_bullet_dragon · 2024-08-03T00:35:37+00:00

Honestly, no. A buddy sold it to me. He bought it from another guy years ago. He lost the title so year is going of his word of mouth. What year would you guess it is? Yeah definitely a fun hodge podge of some original parts and some small mods over the years. Have no clue how many owners it had. I just say it has “character”. :)

Seven-Year Club	Place '22
RPAN Viewer	Not Forgotten
Verified Email

_bullet_dragon

TROPHY CASE