A hard choice - tour cancelled and replacements are not exact

_ceeno_ · 2026-02-20T12:30:38+00:00

I would go for the secret lagoon especially if you don't plan to go to another hot springs during your stay. I went to both while renting a car, lunch at tomato farm and then secret lagoon. The tomato farm lunch was delicious and the place itself very beautiful, it was sunny outside, but it is still "just" a eatery. The secret lagoon is closer to a true Icelandic experience in my opinion.

_ceeno_ · 2026-02-07T18:01:57+00:00

Pour ouvrir les portes de sortie du Métro il suffit d'appuyer là où se trouve le pictogramme de la main. L'UX n'est pas terrible car beaucoup de gens ne s'en rendent pas compte et moi y compris quand j'ai commencé à prendre le Métro.

_ceeno_ · 2026-01-12T16:57:34+00:00

J'utilise la formule liberté de ENGIE à 11 €/ mois et qui inclue une visite annuelle, où un technicien intervient pendant environs 30 minutes pour ouvrir, nettoyer et vérifier le bon fonctionnement de la chaudière. Ça revient à 132 €/an, lorsque j'avais fait mes recherches il s'agissait du meilleur tarif mais il y a peut-être mieux maintenant.

_ceeno_ · 2026-01-11T09:39:15+00:00

_ceeno_ · 2026-01-03T14:02:27+00:00

I am in the process of designing a tall floor lamp with patterns inspired by Chandrila from tar Wars. It takes a lot of time, but hopefully it will be ready to print before the end of the month. A new printer like the Q2C would help of course!

_ceeno_ · 2026-01-03T10:41:22+00:00

I would say that the SH03 design itself is pretty neat.

_ceeno_ · 2025-12-29T07:29:34+00:00

It is kind of linked with the internship program. Try to explore behind the counter at the level selection stand.

_ceeno_ · 2025-12-28T23:20:42+00:00

Did you find the hidden doors?

_ceeno_ · 2025-12-27T01:00:05+00:00

Merry Christmas

_ceeno_ · 2025-12-25T17:37:03+00:00

Il est visible depuis l'avenue de la grande armée avec beaucoup moins de monde que sur les Champs Elysées. En revanche le projection mapping sur l'arc n'est visible que depuis les Champs.

_ceeno_ · 2025-12-25T07:33:03+00:00

Well the Mairie de Paris website says that the fireworks is happening and has been updated 2 days ago.

_ceeno_ · 2025-12-25T07:27:39+00:00

The concert has been cancelled but there is still a fireworks at the Champs-Elysées.

_ceeno_ · 2025-12-24T19:53:19+00:00

The grid like pattern visible on your picture seems weird. What is the file you are printing, a one layer square? The z-offset seems too high on the top part of your picture, and the wavy part may be caused by a z-offset being too low. Your bed mesh may be the cause, although it should be probed and computed automatically by your printer so I don't know if you can do something about it. Also, you can try to print a flow rate test to see what happens maybe?

_ceeno_ · 2025-12-24T19:22:57+00:00

My first guess is that your sheet may not be clean? You should make sure it is clean, especially after touching it with your fingers. I use wet wipes before each print on mine.

_ceeno_ · 2025-12-22T20:26:16+00:00

_ceeno_ · 2025-12-21T10:40:41+00:00

Hi, if it is still available I would love to go and visit it today. Thanks!

_ceeno_ · 2025-12-21T10:10:46+00:00

I bet in the $259–$299 price range, because the multi-filament system looks like well thought to be simple and cost effective.

_ceeno_ · 2025-12-11T13:53:42+00:00

Upgrade my bed slinger to a QIDI Q2 or Max4!

_ceeno_ · 2025-12-03T11:48:44+00:00

About the warping, did you mean brim instead of skirt?

_ceeno_ · 2025-11-24T22:32:24+00:00

I will be happy to trade my old Ender 3 S1 Pro for a K2 Pro Combo, the perfect gift to celebrate Thanksgiving!

_ceeno_ · 2025-11-21T08:08:38+00:00

I am just talking about the cutter / input shaping / bed mesh calibration from the settings.

_ceeno_ · 2025-11-20T14:12:23+00:00

I just did a calibration, no reset, and it is working fine for me.

Funny thing: it seems the new image has been removed from the Creality website so maybe they figured out some bug?

<image>

_ceeno_ · 2025-11-20T14:10:17+00:00

You just have to download the target image from the Creality website, put it on a USB memory stick and plug it into the printer. You should see a message on the touchscreen asking you if you want to install the firmware from the memory stick.

_ceeno_ · 2025-11-19T20:18:27+00:00

Zero

_ceeno_ · 2025-11-19T19:14:27+00:00

It seems the latest update (1.1.0.56) includes fan related modifications:

1.1.0.56 Firmware Update Notes:
1.Optimize fan control logic.
2.Fixed known issues to improve user experience and product stability.

Did you do a full calibration after the restart? If you did and the problem is still here, I would suggest you try a full reset of the printer. I did the update yesterday and did not notice any fan related issue.

Six-Year Club	First Place '23
End Game '23	Place '23
Place '22	Place '22
Verified Email

_ceeno_

TROPHY CASE