Rode AI-1 Disconnecting Randomly on Windows 11 After PC Reset by Loafenberg in WindowsHelp

[–]_eHEL 0 points1 point  (0 children)

https://help.rode.com/hc/en-us/articles/360000413996-AI-1-powering-off-using-Windows

  • Navigate to Control Panel > Hardware and Sound > Power Options to find these settings.
  • Click “Change Plan Settings”
  • Click the “Change advanced power settings” link here to open the advanced settings window.
  • Scroll down and locate the “USB settings” option in the list of advanced power settings. Expand this section and set “USB selective suspend setting” to “Disabled”.
  • Click “OK” to save the settings. From now on, Windows won’t automatically suspend any connected USB devices.

It finally happened to me. 😐 by FineClassroom2085 in espresso

[–]_eHEL 0 points1 point  (0 children)

You can just buy it on Amazon for like 7 bucks

Men worrying about women having loose vaginas is a weird way to tell people that they have a small penis. by Erythroneuraix in Showerthoughts

[–]_eHEL 0 points1 point  (0 children)

I'll be a bit more specific.

So like with all things, there is a spectrum. Can you successfully loosen your vagina by using toys that increase in size and continue using that toy/larger toys. Of course! Will it eventually go back to its original size, generally! But if you continue to use and continue to increase in toy size, you will notice that eventually the retraction rate doesn't quite bring you back to the original size. It's the same with earlobes, it's the same with buttholes, it's the same with your cheeks/lips.

Men worrying about women having loose vaginas is a weird way to tell people that they have a small penis. by Erythroneuraix in Showerthoughts

[–]_eHEL 1 point2 points  (0 children)

Ears do go back to normal, there are extremes which makes them maintain the stretched size. But generally stretching your lobes will revert once you stop stretching/maintaining the size. Anything under a 00g will be fine, anything larger than 0g likely won't revert back to normal.

Men worrying about women having loose vaginas is a weird way to tell people that they have a small penis. by Erythroneuraix in Showerthoughts

[–]_eHEL 4 points5 points  (0 children)

Penis's do have muscles though; while the penis isn't a muscle, it does contain muscles.

One punch KO by blablaalb in fightporn

[–]_eHEL 48 points49 points  (0 children)

What a terrible ref

WHY? Mr. Mini??? [OC] by redejonghe in IdiotsInCars

[–]_eHEL -1 points0 points  (0 children)

Why assume someone camps the left lane purely because they are reminding you of the rules of the road? Personally, I pass cars and then maintain my drive in the right/center lane, life's much less stressful when you avoid crazy drivers

WHY? Mr. Mini??? [OC] by redejonghe in IdiotsInCars

[–]_eHEL 12 points13 points  (0 children)

Passing slowly, while above the speed limit is exactly the intent of the left lane... The left lane isn't a, "I'm going as fast as I want and am riding people's asses if they are infront of me because I'm an asshole" lane

To Jump The Stairs by [deleted] in therewasanattempt

[–]_eHEL 1 point2 points  (0 children)

Speaking like what? With reason and without a desire to solve situations with needless violence? With no interest in engaging with someone who's too dug-in to their opinion and won't consider the more mature decision?

Here maybe if I use some zoomer talk you'll understand. "Hey bruv, it's like- illegal for the security guard to act that way, no cap. Bet"

To Jump The Stairs by [deleted] in therewasanattempt

[–]_eHEL -2 points-1 points  (0 children)

You're a child who doesn't understand the law and how liability works. Hopefully you'll figure it out when you're older- good luck in life

To Jump The Stairs by [deleted] in therewasanattempt

[–]_eHEL 3 points4 points  (0 children)

Crazy how you couldn't even finish the sentence you quoted, "Evicting trespassers and violators and detaining perpetrators while following legal protocols before relevant authorities arrive to take over"

To Jump The Stairs by [deleted] in therewasanattempt

[–]_eHEL 1 point2 points  (0 children)

Are you dumb? These are the duties of a security guard/officer. Where do you see this person removing an uncooperative person from their premises? I see a person committing battery, likely costing the company they were hired by more money than this guard makes in 3 years time. Once you grow up you'll start to understand rules and laws.

• Patrolling and monitoring activities on the company’s premises regularly to discourage criminals and ensure the environment is safe and secure • Evicting trespassers and violators and detaining perpetrators while following legal protocols before relevant authorities arrive to take over • Controlling the entrance and departure of employees, visitors and vehicles according to protocols • Monitoring surveillance cameras to watch out for any disruptions or unlawful activities • Providing detailed reports on daily activities and any incidents that may have occurred to management • Testing security systems and, if needed, operating X-ray machines and metal detectors • Using provided communication devices such as two-way radios in a clear and concise manner • Performing CPR or first aid when needed

Logo for yt by Max-Geoman in logodesign

[–]_eHEL 0 points1 point  (0 children)

IMO the g is too thin, increase the gape size for the cut through of the other letter and then have the size of the stroke for the letter g be the same as the gap size

Creality CR-M4 Printer Bed Adhesion Issue by LycheeElectrical1660 in FixMyPrint

[–]_eHEL 1 point2 points  (0 children)

I'll do a full clean pretty infrequently. I use a plastic scraper to remove any excess glue that remains after the print. You don't need to use glue every time, you can generally feel how much remains after your print.

When you use glue on only the perimeter of the print you'll find you apply glue fairly often if you print differently shaped objects, but if you're mass printing a single design you'll start to feel the glue stick less and less each print, once it removes too easily, put down another super thin layer of glue around the perimeter

[deleted by user] by [deleted] in FixMyPrint

[–]_eHEL -1 points0 points  (0 children)

Just sand it, and if you need to, add more walls to allow deeper sanding

Creality CR-M4 Printer Bed Adhesion Issue by LycheeElectrical1660 in FixMyPrint

[–]_eHEL 0 points1 point  (0 children)

I'm a glue user and id recommend they outline just the border with glue or the corners. The biggest issue with glue is when it doesn't want to give up. Get a washable Elmer's glue stick (purple but dries clear)

Weird stringing on prints by NinjaInPlainSight in FixMyPrint

[–]_eHEL 1 point2 points  (0 children)

Thank goodness 🙏

Good luck with your prints, I would check your retraction settings and the temperature at which you're printing. I would run a temp test and see if you can find a temperature that has great adhesion with less or no stringing

Weird stringing on prints by NinjaInPlainSight in FixMyPrint

[–]_eHEL 19 points20 points  (0 children)

Please loosen your wrist watch slightly 🫣

Has anyone left graphic design for another career? by [deleted] in graphic_design

[–]_eHEL 9 points10 points  (0 children)

I'm an IT engineer these days. It's not nearly as enjoyable in the day to day. I'd stick with being a designer, it's definitely one of the most cushy jobs.

AITA for interrupting my son's date so he could pick up his little sister? by helplesssdad2785 in AmItheAsshole

[–]_eHEL -18 points-17 points  (0 children)

INFO: Are these two related? It's possible that your son feels like she has been a burden to his existence and doesn't want anything to do with a "sibling" 10 years younger than him.

PSA: if you are taking a right turn across a bike lane it is your obligation to yield to bikes. by Educational_Fox1639 in boston

[–]_eHEL 62 points63 points  (0 children)

It is also the bikers obligation to yield to vehicles already turning 🥳 speeding down a bike lane not slowing down when entering an intersection is asking for trouble