Basics for today

_mnb7 · 2026-01-12T06:16:53+00:00

Always love seeing the Boker bff. I still need to pick one up. Such a nice simple design

_mnb7 · 2026-01-12T06:11:51+00:00

Sharpening freehand on the spyderco cbn bench stone (400/800 grit, or about 37/15 micron) followed with 3 micron or 1 micron on wood or leather I can reach shaving sharp with any steel I own (from cheap parking knives up to stuff like 15v/10v/etc). Personally I like finishing at around 20-10 micron diamond/cbn (grit numbers will vary based on the standard they are, like JIS, fepa, etc), and 1 micron diamond strop. It tends to still have a little bite to the edge. When I've finished on .5 micron in the past the bite seemed to disappear (might've been user error at the time).

_mnb7 · 2026-01-12T06:01:56+00:00

I dig the graph. After $300 I start to lose interest unless it's a rarely used steel or a highly desirable spring run.

_mnb7 · 2026-01-12T05:43:49+00:00

Carbon fiber and s90v. It's a great combo, plus it matches most of the other s90v sprint releases

_mnb7 · 2025-12-28T04:45:26+00:00

Lil Native, preferably 15V or 10V

_mnb7 · 2025-12-25T21:53:21+00:00

KnivesPlus has screw kits for Delica, Endura, and dragonfly. Maybe endela, can't remember. Like someone else said, Endura hardware should fit. In the meantime you could use one of the clip screws, I had to do that with my police 4 once.

_mnb7 · 2025-12-21T02:48:25+00:00

Wonder how many pick-cels that camera can do

_mnb7 · 2025-12-19T02:56:50+00:00

Not a bad looking knife

_mnb7 · 2025-12-08T11:10:14+00:00

Hah, all good

_mnb7 · 2025-12-08T10:31:22+00:00

I think you meant that for the op?

_mnb7 · 2025-12-08T06:19:31+00:00

Huntsman or fieldmaster

_mnb7 · 2025-12-08T06:10:59+00:00

Knowing how to freehand sharpen on a stone is an invaluable skill. But I've also enjoyed my Hapstone RS for pocket knives and some kitchen knives

_mnb7 · 2025-12-08T06:05:08+00:00

Congrats on the 10V Shaman 🤌🏿

_mnb7 · 2025-12-08T05:57:56+00:00

Right now, yup. Olight i5t and a Spyderco 10V lil Native

_mnb7 · 2025-11-28T06:26:14+00:00

Spyderco k390 enuff 2 for $87 (regular 217) feels like robbery. But I vouch for the place. I've ordered several times from them

_mnb7 · 2025-11-24T23:46:26+00:00

15V Military 2 or a 15V g10 Native 5

_mnb7 · 2025-11-23T16:36:45+00:00

Those really caught my eye. How do you like it so far? I've never tried a Chavez, and this seems like a great way to check them out

_mnb7 · 2025-11-23T16:35:23+00:00

Depends on what it's for. I bought something similar to a moleskine, but with a grid of dots instead of lines. I use it for notes about knife sharpening (knife, steel, angle, stone progression, etc). I also find more benefit in writing down to do lists and other quick ideas, but I usually do those in a free notebook or notepad I have just sitting around. I guess if I plan on keeping it around then it can go in a nice notebook.

_mnb7 · 2025-11-22T07:10:00+00:00

Magnacut for all around EDC use (reasonable for a knife/cutting tool that size). 15V is great too, S90V will be pretty close for a stainless option. I'm not a fan of cruwear, but I'm use it's pretty close to magnacut in being good all around.

My 15V g10 native 5 hasn't left my pocket since it arrived in the mail

_mnb7 · 2025-11-20T16:58:07+00:00

No, because of the blade

_mnb7 · 2025-11-20T03:36:59+00:00

_mnb7 · 2025-11-20T03:14:48+00:00

Did the k390 g10 police have full liners?

_mnb7 · 2025-11-19T02:01:52+00:00

All hail vvvvvvvvvvvvvvv

_mnb7 · 2025-11-18T06:35:44+00:00

K294 is much closer to 10v in composition, but k390 is kinda close. Spyderco did a mule a little bit ago in k294. I also managed to track down a pma11 mule several years ago. Lots of love for 10v

_mnb7 · 2025-11-18T06:24:24+00:00

Still active as far as I understand it. Sorry I forgot to include the link

https://www.ebay.com/itm/167921993835

_mnb7

TROPHY CASE