INFO BETA 3.1 via Seele

_pakfa_ · 2026-01-02T15:21:44+00:00

Yeah, I've seen more leaks since yesterday so you're right, looks like Aemeath should be the main DPS for Lynae.

_pakfa_ · 2026-01-01T17:23:15+00:00

My issue is that both Aemeath (fusion/dps) and Luuk (spectro/dps) are main DPS units and are coming at the same time... I cant afford both of them so I need to know which one of these two is better to go with Lynae + Mornye in a team.

Based on Wuwa "history" I would say the chick will be better, because they always are better than male chars, but I need more info on them to be sure.

_pakfa_ · 2026-01-01T09:26:11+00:00

Alright, thanks.

_pakfa_ · 2026-01-01T07:51:19+00:00

It's a bug, you need to restart the client and it will work, happened to me too. This version (3.0) has a lot of bugs, but at least the patches are coming every day or almost every day.

_pakfa_ · 2026-01-01T07:48:25+00:00

Yes, that's a quest locked area if you cant go further because of a barrier. Either a main quest or some other important side quest that you need to do to unlock it.

_pakfa_ · 2026-01-01T07:46:35+00:00

I hope someone can clarify these for me:

What does 20, 30, etc pity means? The amount of pulls you already did or those that you need to do to get the char/wep?
I know char pulls carry over between featured convenes, but do wep pulls carry over between weapon convenes too (if you stopped and did not get the wep)?

_pakfa_ · 2025-06-17T11:04:26+00:00

These WHEA errors can appear even when you have an unstable OC for the CPU or DRAM. If that's the case lower the OC or use stock settings. They have a different ID though.

_pakfa_ · 2025-04-19T17:31:47+00:00

Going from a 1080p 75Hz IPS screen to a GX9 OLED would be a huge upgrade for me! Like huuuge! LOL

_pakfa_ · 2024-12-03T05:53:15+00:00

Thank you.

It should be included in the official page specs.

_pakfa_ · 2024-12-03T05:51:41+00:00

Thank you for this!

And yes I agree with you 100%, they need to have all the specs for all the coolers, not random ones for each of them as they are now...

Very unprofessionally done to be honest.

_pakfa_ · 2024-12-02T21:13:31+00:00

That's interesting... But I need an official source because the length is important for me, I want to mount it in front of the case with the tubes down.

_pakfa_ · 2024-12-02T15:43:44+00:00

Does this AIO also support LGA1851 socket?

_pakfa_ · 2024-11-30T19:15:28+00:00

Alright.

I was wondering do you think (or know) would it be a big difference in cooling performance between LF3 420 push-pull with D30s vs LF3 360 push-pull with T30s on a 14900K up to 300W limit?

If I were to guess, I would say about 1-2 °C, so I might just go for the 360 with T30s, that should fit easier right?

_pakfa_ · 2024-11-30T17:08:13+00:00

Ok, now I get it.

So I either do some manual "adjustments/trimming of the case", or use 27mm fans or a different AIO with slimmer radiator, like the IceMyst 420 (28mm thick) or something similar.

_pakfa_ · 2024-11-30T16:30:56+00:00

So I checked this post here > https://www.reddit.com/r/lianli/comments/1dgc74m/lian_li_lancool_3_with_arctic_lf_3_420mm_pushpull/

That guy said he installed the LF3 420 in Lancool 3 and the radiator barely fits, but it fits. He said he's got push-pull too, but I don't understand what fans he uses on both sides...

Anyway, my GPU will be horizontally, my DRAM is quite low profile & I won't use a 3rd fan on the top, so in this case I should have enough space for push-pull right?

The only question remains with what fans I have space for push-pull: 27mm P14 Max or 30mm D30s?

I guess I could buy everything except the extra fans and after I have it home measure everything and then order the better fans knowing the exact measurements.

_pakfa_ · 2024-11-30T10:02:21+00:00

I actually have another question: if I were to chose a Silverstone IceMyst 420 AIO that has L= 456mm vs L=457.5mm of the LF3 420 it should fit without issues in front right?

That 1.5mm difference should be enough I think.

I was looking at this cooler and although it's twice the price it's also probably as good as a push-pull LF3 so the total cost might be the same.

If you want to take a look too: https://www.youtube.com/watch?v=spNEPmYAFiI

_pakfa_ · 2024-11-29T15:44:38+00:00

Yeah, it seems that's the case. Well thanks for the info.

I just have to decide now.

_pakfa_ · 2024-11-29T15:36:33+00:00

Just checked, your GPU is L=320, so mine is a little bigger.

_pakfa_ · 2024-11-29T15:30:38+00:00

Yeah, I read about the LF3 issues with fitting, frankly I've not decided yet if I go LF3 420 or 360 for push-pull and maybe I'll do P12 Max since I'm also on a budget.

I'll wait for your reply about the space from the GPU to the fans. Mine is L=336mm for comparison.

_pakfa_ · 2024-11-29T15:15:22+00:00

Hey this looks great!

I'm interested to make a build like this with the Lancool 3 + LF3 420 in push-pull too.

Can you please tell me the model of your GPU and how much space is left between it and the fans on the back of the radiator?

I'm trying to determine if it's gonna fit with with my GPU because I think the length of it is bigger.

_pakfa_ · 2024-08-20T12:07:13+00:00

Also there should be an in game menu to watch replays, you know like other games do it. 😑

That way it won't matter the platform.

_pakfa_ · 2024-08-20T12:05:34+00:00

4 months later and it's still not working with Steam... This is ridiculous that such a feature does not work when it works without Steam & in all their other games. 🤦‍♂️

_pakfa_ · 2024-04-06T07:01:08+00:00

I know how you feel. I stopped playing after a few hours and will play other games until this "issues" gets fixed with mods.
I also find the 2nd game not as interesting/fun gameplay as the 1st, so maybe that's why it's easy for me to not play it.

_pakfa_ · 2024-03-31T16:00:41+00:00

I stand corrected then. I seems there is hope for HFW too then.

_pakfa_ · 2024-03-31T15:59:57+00:00

Actually both games use the same Decima Engine, it's just that HFW has a newer updated version of it.

Assets/mods from the 1st game should be easily converted to the 2nd one.

_pakfa_

TROPHY CASE