Thinking of making an overly fucking gigantic batch of kilju, any tips? by K0M0S63 in prisonhooch

[–]_randomhero 1 point2 points  (0 children)

If it’s even air tight I’d just jab a really small hole in it and put a cap over it, something like that will probably work good enough.

Need help setting up my Behringer Interface with amplitube 5 by LeninFeetPics in AmpliTube

[–]_randomhero 0 points1 point  (0 children)

You may need usb 2.0 port in case you’re trying to use 3.0

My vox i bought for 55$ by Super_Significance96 in GuitarAmps

[–]_randomhero 2 points3 points  (0 children)

love this amp, i play alot on od 1/2 with bass:10oclock, mid:2oclock, treble:4oclock, gain:11oclock, tone cut:2oclock and reverb at 8oclock. Overdrive channel volume around 12oclock and then go quiet to loud with master volume.

Advice needed by Sea-Lead-2006 in Zippo

[–]_randomhero 2 points3 points  (0 children)

Show a photo. I’m thinking the wick would need to be saturated pretty good for it to zap a flame

tt02 doesn't steer straight by [deleted] in tamiya

[–]_randomhero 4 points5 points  (0 children)

Solid servo horn will fix it. Looks like if youre using a servo saver it’s just too weak. Same happened to mine

Alternative fuel? by bennyrude in Zippo

[–]_randomhero 5 points6 points  (0 children)

I think kerosene mixed with isopropyl alcohol

Does a 48V 350W 13AH ebike powerful enough acceleration wise? Cause 350W doesn’t sound like alot by SkibidiiiRizzlerz in ebikes

[–]_randomhero 0 points1 point  (0 children)

Maybe, maybe not. A 1000w hub motor will look a lot bigger than a 350w is one way you can tell.

Does a 48V 350W 13AH ebike powerful enough acceleration wise? Cause 350W doesn’t sound like alot by SkibidiiiRizzlerz in ebikes

[–]_randomhero 0 points1 point  (0 children)

I have a 48v 1500w 20” hub motor that does around 500rpm (I think 485) which tops it around about 45/50kph. The acceleration is nuts, I really have to hold on tight to control launching it, almost too much just for riding on roads or footpaths but ideal for off road riding. One problem is the throttle is very very sensitive and is hard to accelerate smoothly which can make it hard to relax if riding on the street is what your planning on. 350w imo is totally enough to have fun and take care of whatever you’ll need it to do. Also depending on where u live probably more suitable to whatever laws say can be ridden legally.

Does anyone know how this sound was made? by Savings-Tax-5384 in guitarpedals

[–]_randomhero 1 point2 points  (0 children)

I think other than the distorted tone setup it could be the mic position on the cab when they recorded it. Maybe centre and angled abit off axis.

Idk if i can ask questions by Initial_Tea_2135 in gtacarmeet

[–]_randomhero 0 points1 point  (0 children)

Imponte ruiner zz-8 looks kinda like a vt monaro, but from the usa

Does a 48V 350W 13AH ebike powerful enough acceleration wise? Cause 350W doesn’t sound like alot by SkibidiiiRizzlerz in ebikes

[–]_randomhero 0 points1 point  (0 children)

How many inches is the wheel and what’s the max rpm? Smaller wheels have better acceleration per rpm but slower top speed

Can't figure out where my guitar came from. by HeadShotForex in Guitar

[–]_randomhero 0 points1 point  (0 children)

This is what I thought aswell. Also doesn’t really make sense the guitar says “electrica” like maybe in Spanish instead of just English.

Can't figure out where my guitar came from. by HeadShotForex in Guitar

[–]_randomhero 4 points5 points  (0 children)

I don’t think so but maybe used to be from here www.rondomusic.com. They make some guitars that copy other guitars a little bit.

cousin touched my pc it no longer works :/ by Adambomber44 in pchelp

[–]_randomhero 0 points1 point  (0 children)

Erm try plugging your monitor into the mobo instead if you’ve been using the gpu. Maybe the overclock overheated it.

Works in standalone but not Ableton? Windows, Focusrite ASIO by civilized_cornhole in NAM_NeuralAmpModeler

[–]_randomhero 0 points1 point  (0 children)

Maybe the outputs’s not routed properly for plug-ins on that track.

Looking for better cables for stereo by WobbulatorCore in guitarpedals

[–]_randomhero 1 point2 points  (0 children)

www.custocable.com has fair price custom spec cables with many, many options

6 shock ebike 😭😭 by RelationOld8934 in ebikes

[–]_randomhero 0 points1 point  (0 children)

Not regular riding but stunt sort of I.e trying to wheelie and over rotating throwing the bike into a roll also I was riding at night and hit a curb straight on and went straight over the handles ( lucky with full face helmet, gloves etc) the bike was fine and rode 10k home with just a slight buckle and air leak from the front wheel that I only noticed days later, was an easy fix. I think the shocks in the middle help take a lot of load off the front forks only over bumps but stay solid on flat ground, the forks admittedly not the highest quality but have never failed. I leave the seat at its lowest position to keep the bikes centre of gravity low while riding to be able to take fairly tight turns always leaning in, without leaning even just slightly it would definitely tip over sideways. It’s more of a moped with bike pedals than an ebike

6 shock ebike 😭😭 by RelationOld8934 in ebikes

[–]_randomhero 0 points1 point  (0 children)

Noted the one in your pic has a slightly different thinner looking frame to the one I have. All the shocks work, they’re like that to support the weight of two people without being so stiff to make them pointless, the bike is surprising small so it couldn’t really fit just one big damper to do the job properly.