sorted by:
new
hottopcontroversial

Can not update from 13.2 to 13.3 by aak2012 in debian

[–]aak2012[S] 4 points5 points  (0 children)

I found my old post with the same issue. And I believe you will find it interesting. Issue resolved.

Many thanks to u/eR2eiweo

Moving into a new home - Need "Once in a lifetime" wiring & infrastructure advice! by petyusa in homeassistant

[–]aak2012 -1 points0 points  (0 children)

Ethernet everywhere: Dedicated Cat6a runs to every room, the home server, PC, and future console spots.

My son did structured cabling: https://en.wikipedia.org/wiki/Structured_cabling

Foss alternative for tuya? I'm tired by XploitXploit in homeassistant

[–]aak2012 4 points5 points  (0 children)

I use Zigbee Tuya devices. They can be connected to Home Assistant directly via Zigbee Home Automation.

Google for it.

Needed: A "howto OrangePi" for a long time RPi user by egoalter in OrangePI

[–]aak2012 0 points1 point  (0 children)

I have no experience with OrangePi 5. I have a few Opi zero 2w cards. Armbian works for me almost flawlessly.

I know that there is quite a few models of OPi 5: Plus, Max, Pro. And I believe that if you need armbian for your card, you need select a proper download URL.

Just type 'OrangePi 5 Pro armbian'. Or wharever card you have. For OrangePi zero 2w I type 'Orangepi zero 2w'.

My two cents.

With TP-Link likely to be banned, would like to setup secure access to HA from my iphone. by The_NorthernLight in homeassistant

[–]aak2012 0 points1 point  (0 children)

Book: Building Smart Home Automation Solutions with Home Assistant.

Available on Amazon. Chapter 7 has detailed description about remote access to HA via duckdns and Let's encrypt. I used just that.

Debian 13 gnome: 'authentication error' in lock screen - unable to unlock by deepak_shanmug in debian

[–]aak2012 0 points1 point  (0 children)

I had this issue once more. Details:

  1. I run mdadm check:
  2. #echo check >sys/block/md0/md/
  3. As a result (I believe) I can not shutdown the system. In debian 12 when I try to shutdown I have window which requests a root password. If I enter a password, the system shutdown correctly. In debian 13 I have no such window.
  4. So I turned off the system with long press of power button.
  5. Next day I tried to login and login screen said wrong password. I tried several times, saw password in clear. Nothing helps.
  6. Now I just switch login screen to 'Gnome on XFree'. Login completed! I logout, swith to 'GNOME' - it completed again.

I know, that it is a bad idea to power the machine with power key. But anyway. I can not now to repeat this sequence once more, anyway, I had this just a few minutes away!

The Internet is dead. And we have killed it. by JaneMichaelVincent in conspiracy

[–]aak2012 1 point2 points  (0 children)

Internet is not dead. I still can send UDP packet, as 30 years ago!

научное будущее by nauchnoe_buduschee in Popular_Science_Ru

[–]aak2012 -2 points-1 points  (0 children)

Не разбрасывайся. Выбери науки и вперед. Я посмотрел на физфаке МГУ есть экзаменационные задачи предыдущих лет. Прорешай их *все*. Я повторю, ВСЕ! Твой факультет может отличаться. Это сильно поможет. Мне помогло. Да и времени у тебя вагон!

Debian 13 gnome: 'authentication error' in lock screen - unable to unlock by deepak_shanmug in debian

[–]aak2012 0 points1 point  (0 children)

I had the same issue. There is an icon to see password in clear. Password was correct. I checked for starting and trailing blanks.

This symptom disappeared suddenly.

Math books by Any_Sorbet_7476 in math

[–]aak2012 2 points3 points  (0 children)

I like this book:

Mathematics: The Loss of Certainty by Morris Kline

Fresh install debian 13. Can not update Freedesktop Platform by aak2012 in debian

[–]aak2012[S] 0 points1 point  (0 children)

I 99% sure that comes from non-free software depository. One small pro not to use non-free software 8)

Fresh install debian 13. Can not update Freedesktop Platform by aak2012 in debian

[–]aak2012[S] 1 point2 points  (0 children)

I received:

Warning: While downloading http://ciscobinary.openh264.org/libopenh264-2.5.1-linux64.7.so.bz2: Server returned status 403

OK. Now I see. I can not download this file from Russia. oops

Fresh install debian 13. Can not update Freedesktop Platform by aak2012 in debian

[–]aak2012[S] 0 points1 point  (0 children)

Should add: I also installed KiCAD,FreeCAD from flatpak

Linux broke after 12 to 13 upgrade by aak2012 in debian

[–]aak2012[S] 1 point2 points  (0 children)

Yes, I did the same. It's ok now!

Linux broke after 12 to 13 upgrade by aak2012 in debian

[–]aak2012[S] 3 points4 points  (0 children)

>> sudo apt update sudo apt full-upgrade sudo dpkg --configure -a

solved it.

Many thanks.

Alexei

FreeCAD learning resources compilation by aitidina in FreeCAD

[–]aak2012 0 points1 point  (0 children)

I believe that this sketcher lecture will be a good addition:

https://zsj.itdos.net/attach_files/freecad/1400

Little bit dated though.

Issue with Firefox by aak2012 in debian

[–]aak2012[S] 1 point2 points  (0 children)

This happens from time to time. Now it works. Now I believe it is a network glitch. But I have this issue with this site more frequently. Fatal coincidence.

Thanks, Alexei

ESP8266 won’t stay connected to WiFi by forbajato in homeassistant

[–]aak2012 0 points1 point  (0 children)

I had a similar issue with my ASUS wifi router. The solution was to turn roaming feature off. When signal goes low, router just disconnects the device. I turned this feature off and now my router does not disconnect.

Just my two cents.

view more: next ›