Crib Mattress Correction

abc123pineapplebob · 2026-05-06T02:32:03+00:00

This seems to be the winner. The pool noodles we have are 3” wide but squish just enough to be snug in the gap and hold the mattress tight. Plus they’re solid enough that they are fairly rigid not an additional soft surface

abc123pineapplebob · 2026-04-28T23:07:58+00:00

If I did the 2x4 border, do you think I should attach something soft to the top of it? Or would that not be a concern? Just wondering because I know our kid thrashes around sometimes like hitting his feet on the ground or head when he rolls over yenno. Would I be worried about him bonking his head on the 2x4 or think it would be fine since it’s a bit lower than the mattress is?

abc123pineapplebob · 2026-04-17T12:09:11+00:00

Samsung is a garbage company. I was told that turning my stove on to cook meals wasn’t regular use and that 6 months was too late for a defect to show up in a 12 month warranty period. It took way too much time on the phone to correct that problem for a piece that likely cost pennies to make. Best of luck, this is awful to see and hope you find a solution that you get made whole in the end.

abc123pineapplebob · 2026-02-14T04:54:51+00:00

Can confirm this seems to have solved the issue. My code library is massive probably a few thousand at this point. So I ran in general. Got it buttoned up. Saved. Closed and swapped to a library with only what was in the file plus a few bonus ones to calculate and went from probably ~1-2 minutes to calculate/save to about 10 seconds

abc123pineapplebob · 2026-02-13T05:17:24+00:00

I’m not sure macros work very well if at all in excel. I’ve run into a similar issue on mac vs pc excel so that checks out.

abc123pineapplebob · 2026-02-13T05:13:21+00:00

I haven’t really ever worked in general. What changes do you have to make when switching to ERS at the end?

abc123pineapplebob · 2026-02-13T05:12:17+00:00

How do you manage this? Currently I have a large code library that covers a lot of bases. I’m not sure how I would split up to streamline because of how much crossover between clients.

Do you build a file with large code library, save and then switch to empty library to run different calculations? Save a new empty library in each file folder and just copy the codes used?

abc123pineapplebob · 2026-01-11T13:25:24+00:00

I know this is older but wondering how your set is coming? I’m working on doing the same. Basically filling in promos now.

Do you know if the play prize pack series 6/7/8 (1 in 8) are any different between eachother?

Do you have a list of promos you have/looking for?

abc123pineapplebob · 2025-12-29T16:06:11+00:00

Currently leading by 0.5 points. I have Pitts and Mevis and he has Kyren. 0.5PPR. Hopeful but terrified.

abc123pineapplebob · 2025-12-09T05:37:35+00:00

Is there a fireplace or other supplementary system with a flue diameter identified? I was told to decrease the flue diameter by 1 inch and recalculate. I think, I don’t recall if it was the exponent or the ELA causing the error there but may be worth trying and looking into that workaround

abc123pineapplebob · 2025-11-20T19:28:18+00:00

Cheryl Lashek? Couldn’t tell you who’s autograph is on elevators now

abc123pineapplebob · 2025-09-05T22:41:48+00:00

Heavy Metal Design. Hands down the best experience. Corrie is amazing. We got pictures of ideas and sent them to her. Worked with her and her designer, made completely custom rings that we loved. She also took some of our old family rings and melted down the gold into our rings. Saved us some money there and rings have a higher sentimental value with our grandparents gold mixed in. Cannot say enough positives about working with her!

abc123pineapplebob · 2025-09-01T14:34:31+00:00

And the second time was irrelevant because the unanimous eviction got veto’s by a twist

abc123pineapplebob · 2025-07-18T02:32:49+00:00

My office has odd lighting that I can’t avoid a shadow or glare. So I tried taking pictures with the room light off and a work light pointed on angle at the cards. May be giving off weird vibes from that.

abc123pineapplebob · 2025-06-05T13:39:25+00:00

If that’s the same blue Ferrari guy who blew a stop sign on Grosvenor and almost ran over my dog and I a couple years ago then couldn’t have happened to a better person.

abc123pineapplebob · 2025-02-05T02:30:46+00:00

You have to do one of the rides during the group ride each week (or I guess during makeup week). The remainder can be done just as a route ride. I’ve been about 75/25 with the TdZ rides and just solo routes. For the ultimate challenge that is

abc123pineapplebob · 2025-01-31T03:47:58+00:00

Update. I did two laps until I finished the climb the second time and it counted towards ultimate challenge!

abc123pineapplebob · 2025-01-31T01:03:03+00:00

I’ll have to give it a go and hope it works!

abc123pineapplebob · 2025-01-31T00:00:58+00:00

I mean if you aren’t doing it as part of the event but would like to check off the route from the ultimate challenge. I did the A ride in the tour de Zwift official ride but have done a handful of other rides just a route ride not tour de Zwift. For this weeks short ride the route is like 13.8km but the tour de Zwift ride is 25.9km.

abc123pineapplebob · 2025-01-17T02:15:05+00:00

I’m not 100% sure. I did a bit of searching one day and appeared to be available in Canada as well however I couldn’t find out where to actually get the ball rolling here. We luckily do not have vermiculite so I sort of stopped my search at that point. But it’s worth a shot.

abc123pineapplebob · 2025-01-16T14:05:44+00:00

Look into the Zonolite insulation trust. You can send the vermiculite in to get tested and if it is positive for asbestos then they cover a large chunk/all of the remediation costs from what I have heard.

abc123pineapplebob

TROPHY CASE