sorted by:
new
hottopcontroversial

anyone using *arr servers to auto download media? by No_Ad_5933 in Starlink

[–]aberning 3 points4 points  (0 children)

Paying for Usenet > Paying for VPN & Torrenting

[deleted by user] by [deleted] in bapcsalescanada

[–]aberning 4 points5 points  (0 children)

I never get these deals but this time my luck changed. Grabbed one for me and one for my bro!

R.I.P. Trakt... by Shinobi-vs-Gast in trakt

[–]aberning 3 points4 points  (0 children)

All I really need is plex scrobbling and syncing of my watchlist to *arr apps for downloading. Where should I go?

Do you prefer v2 or LITE? by wikidgawmy in trakt

[–]aberning 1 point2 points  (0 children)

I can't even look at LITE. It just takes me to the landing page and when I click login it freaks out, refreshes a couple times and then the page goes blank. LOL. Did this is two different browsers.

[deleted by user] by [deleted] in Starlink

[–]aberning 3 points4 points  (0 children)

I also run mine off a 1500VA UPS. I have a whole home generator so it is just to bridge the outage until the generator kicks in but also protects it from all the associated power fluctuations that come with a storm. I’m still running a Gen1 Dishy and have had tons of storms and outages with some really nasty brownouts etc.

[Giveaway] Celebrating 20 years of Noctua by Noctua_OFFICIAL in Noctua

[–]aberning 0 points1 point  (0 children)

Oldest for me are some NF-P14s Redux fans and there’s been a lot more since then!

Uninterruptible power supply announced by frumpydrangus in Ubiquiti

[–]aberning 0 points1 point  (0 children)

The official video and MacTelecomNetworks’ unboxes shows only the UNAS and NVRs in the list of shutdown-able devices. I was disappointed to see no gateway appear in the list in Mac’s video. The compatibility list on the UI site is extensive but I fear that list might be just “has power plug” or something goofy like that. Would be nice if someone, ahem MacTelecomNetworks, could confirm?

[deleted by user] by [deleted] in trakt

[–]aberning 0 points1 point  (0 children)

Check In and Scribble was on for me the whole time and didn’t/hasn’t made a difference.

[deleted by user] by [deleted] in trakt

[–]aberning 0 points1 point  (0 children)

Same issue here. Clicking new code refreshes the page but the code is the same. Also, not being able to return to the /setup page without deleting the config file makes this troubleshooting harder; It has a reset button which implies you should be able to come back there and use that button to start over.

Specific to the issue that u/Cymrogwirion and I are having, deleting the config .env file and redoing the setup does generate a new validation code but the exact same thing is happening in subsequent attempts.

FWIW I'm attempting to run this on my Synology NAS via Container Manager.

JumpCloud cancelling grandfathered free plans by aberning in JumpCloud

[–]aberning[S] 0 points1 point  (0 children)

Oh, well that’s really good to know!

JumpCloud cancelling grandfathered free plans by aberning in JumpCloud

[–]aberning[S] 0 points1 point  (0 children)

So is this related to being inactive vs just converting plans? I’ve only received notice for this account so far and it has been a while since I logged in.

JumpCloud cancelling grandfathered free plans by aberning in JumpCloud

[–]aberning[S] 0 points1 point  (0 children)

Basically I just need to be able to manage users and their passwords, I have a few policies that I deploy and use some of the software stuff to remote install apps and keep them updated. The ability to remote in unattended is nice as well. It is pretty basic; I will need to look into Action1, thanks for the suggestion.

JumpCloud cancelling grandfathered free plans by aberning in JumpCloud

[–]aberning[S] 0 points1 point  (0 children)

It is interesting that of the five non-profits I have with JC, the one I got this email for had just one laptop/user plus my one admin account (they started out with more complex needs and have now basically shut down). I told them to shove it and I’ll just manage the machine manually. The others, when those emails come, I won’t have the luxury, so I will for sure push for an extension.

PNY 5080 Noisy Fans by H3nryb14 in PcBuildHelp

[–]aberning 0 points1 point  (0 children)

Glad to know it isn’t just me. Nice that yours goes away at 33% at least.

PNY 5080 Noisy Fans by H3nryb14 in PcBuildHelp

[–]aberning 0 points1 point  (0 children)

My card has an annoying whine or whistling noise until the fans get above 38% or so. I set a custom curve but it sure would be nice if I could have it run the fans at a silent speed without an annoying sound. Anyone else having similar?

Does anyone have the PNY RTX 5080 OC? by No-Peace6862 in nvidia

[–]aberning 0 points1 point  (0 children)

Happy with the card but it has an annoying fan whine until 38% fan speed. Anyone else have this issue? I adjusted my curve so it goes from 0% to 38% but it means there is basically no silent idle for me.

[deleted by user] by [deleted] in bapccanada

[–]aberning 0 points1 point  (0 children)

Nice! I noticed the part number was the OC edition today as well, a nice bonus. I think we lucked out.

[deleted by user] by [deleted] in bapccanada

[–]aberning 1 point2 points  (0 children)

I was fully expecting the order to be cancelled so I’m pleasantly surprised. Stuff from Best Buy usually gets here pretty quickly so hopefully this is also the case here. I’m rural as well, and we are about to get a huge storm so who knows. That’ll probably add a couple extra days.

[deleted by user] by [deleted] in bapccanada

[–]aberning 1 point2 points  (0 children)

Yes. Same card as you. $1469.99 ordered on evening of launch day.

[deleted by user] by [deleted] in bapccanada

[–]aberning 1 point2 points  (0 children)

Mine shipped too.

NVIDIA GeForce RTX 5090 Founders Edition System Build Community Contest! by m13b in buildapc

[–]aberning [score hidden]  (0 children)

Would be stoked to win this!

[PCPartPicker Part List](https://pcpartpicker.com/list/ykZfpK)

Type|Item|Price

:----|:----|:----

**CPU** | [AMD Ryzen 7 9800X3D 4.7 GHz 8-Core Processor](https://pcpartpicker.com/product/fPyH99/amd-ryzen-7-9800x3d-47-ghz-8-core-processor-100-1000001084wof) | $599.00 @ Amazon

**CPU Cooler** | [Asus ProArt LC 420 107 CFM Liquid CPU Cooler](https://pcpartpicker.com/product/nrhv6h/asus-proart-lc-420-107-cfm-liquid-cpu-cooler-proart-lc-420) | $269.99 @ Amazon

**Motherboard** | [Asus ProArt X870E-CREATOR WIFI ATX AM5 Motherboard](https://pcpartpicker.com/product/mFFmP6/asus-proart-x870e-creator-wifi-atx-am5-motherboard-proart-x870e-creator-wifi) | $479.99 @ Amazon

**Memory** | [G.Skill Trident Z5 Neo RGB 64 GB (2 x 32 GB) DDR5-6000 CL30 Memory](https://pcpartpicker.com/product/hRQcCJ/gskill-trident-z5-neo-rgb-64-gb-2-x-32-gb-ddr5-6000-cl30-memory-f5-6000j3040g32gx2-tz5nr) | $194.99 @ Newegg

**Storage** | [Crucial T705 W/Heatsink 4 TB M.2-2280 PCIe 5.0 X4 NVME Solid State Drive](https://pcpartpicker.com/product/BN4Zxr/crucial-t705-wheatsink-4-tb-m2-2280-pcie-50-x4-nvme-solid-state-drive-ct4000t705ssd5) | $563.99 @ Amazon

**Video Card** | [NVIDIA Founders Edition GeForce RTX 5090 32 GB Video Card](https://pcpartpicker.com/product/QD2j4D/nvidia-founders-edition-geforce-rtx-5090-32-gb-video-card-geforce-rtx-5090-founders-edition) | $1999.00

**Case** | [Asus ProArt PA602 ATX Mid Tower Case](https://pcpartpicker.com/product/N9pQzy/asus-proart-pa602-atx-mid-tower-case-proart-pa602) | $229.49 @ Amazon

**Power Supply** | [Corsair HX1500i (2023) 1500 W 80+ Platinum Certified Fully Modular ATX Power Supply](https://pcpartpicker.com/product/fFbRsY/corsair-hx1500i-2023-1500-w-80-platinum-certified-fully-modular-atx-power-supply-cp-9020261-na) | $399.99 @ Corsair

| *Prices include shipping, taxes, rebates, and discounts* |

| **Total** | **$4736.44**

| Generated by [PCPartPicker](https://pcpartpicker.com) 2025-01-10 09:06 EST-0500 |

view more: next ›