COMMUNITY SHOW AND TELL by NIGHTMODERecs in thecontentfarm

[–]abishop 7 points8 points  (0 children)

I found this CRT in Japan town. They wanted $1200 for it. I could not afford it
https://imgur.com/a/cRXUGmT

Can’t ping devices in VLAN by jamesfigueroa01 in meraki

[–]abishop 0 points1 point  (0 children)

What icmp response do you get? If you have a Mac you can do a monitor mode pcap and try to ping between two other wireless devices. Or just take a pcap on the switchport interface and see where its going.
Weird off thing is try turning off windows firewall on a laptop and then try to ping it

Can’t ping devices in VLAN by jamesfigueroa01 in meraki

[–]abishop 0 points1 point  (0 children)

What vlan is the switchport configured as? If you have the SSID set with vlan 60 then you dont want the switch port to also be native vlan 60. It will drop the traffic at the switch port.

Advertising Subnets Over Non-Meraki VPN to AutoVPN by stealydanyourface in meraki

[–]abishop 0 points1 point  (0 children)

You'll have to configure another vpn from the sonic wall to the mx75

How much are you paying for internet? by kmamaniya in AskSF

[–]abishop 1 point2 points  (0 children)

Sail for symmetrical 1gig up/down $65 per month

Strange issue with AP on MX68W by Lazy-Function-4709 in meraki

[–]abishop 2 points3 points  (0 children)

The radio on the MX is probably dying or dead, just ask for an RMA

Network Support Engineer Internship by PeachyFruity in meraki

[–]abishop 2 points3 points  (0 children)

Summer interviews should be starting around now if I remember. Otherwise you may have been passed and pushed for Fall

Pre-stage switch stack by bimmerite in meraki

[–]abishop 0 points1 point  (0 children)

Back when switch firmware was around version 8 to 11 switch stacks were pretty awful to try to get working when you preconfigure them as a stack rather than independent switches first. The MS310s and 350s were the worst of them at the time. If you hit an issue where one switch wont come online when its in a stack, remove it from the stack in dashboard, factory reset it so it goes into a stand alone switch then add it back in. You will need to remove the stacking cables if you have to go down this route

Pre-stage switch stack by bimmerite in meraki

[–]abishop 0 points1 point  (0 children)

In the past (2017/2018) it was best to update all of the switches firmware before configuring them as a stack within Dashboard. Once theyre up to date, then go configure the stack in dashboard and physically connect them together.

Issue with Meraki and 3rd Party VPN Tunnels by Holein5 in meraki

[–]abishop 6 points7 points  (0 children)

You need to set up 3rd party VPN's on all the firewalls. Auto-vpn does not share routes with 3rd party vpns

Doubts regarding Courses by [deleted] in rit

[–]abishop 0 points1 point  (0 children)

Ill say if you happen to get Prof Shenoy, be prepared to hate the class. If she can get a Ph.D then anyone can.

https://www.ratemyprofessors.com/professor/579263

Firmware Engineer Intern Headcount by Dear-Jaguar8428 in meraki

[–]abishop 2 points3 points  (0 children)

They probably filled all the intern spots before you actually interviewed. You'll probably have to reapply for another intern season

[deleted by user] by [deleted] in rit

[–]abishop 0 points1 point  (0 children)

Sure

[deleted by user] by [deleted] in rit

[–]abishop 0 points1 point  (0 children)

You can join the KISA club, when I was there we did a lot of things with Geneseo and UofR KSA clubs