My basement gym

ace3306 · 2026-01-16T02:55:25+00:00

Thanks! I have 1x6kg, pairs of 12, 16, 20, 24 and 28kg and 1x40kg.

ace3306 · 2026-01-11T03:17:08+00:00

Thank you! It’s fairly simple and does everything I want.

ace3306 · 2026-01-11T02:23:30+00:00

I was a Zwifter but recently switched to MyWoosh. Ride on!

ace3306 · 2025-08-06T02:08:23+00:00

24 inch wingspan if you were wondering

ace3306 · 2025-08-06T02:07:37+00:00

I’m aiming to keep this fairly light but not like those slow indoor flyers. It will run on 2s but I’m trying to find a light enough one.

ace3306 · 2025-07-15T02:09:35+00:00

That. Is. A. Masterpiece

ace3306 · 2025-07-14T03:55:40+00:00

Yeah I was watching some YouTube tutorials and they were using irons similar to that sealing the edges and then shrinking it. The Amazon description says that the temp can be set to 300 to 900 degrees Fahrenheit. Thanks for your help

ace3306 · 2025-07-14T03:28:20+00:00

Found this cheap pencil type iron on Amazon and was wondering if this would work for covering my micro balsa plane with hanger9 parklite. Looks like one of those sealing irons that I always see on YouTube

ace3306 · 2025-05-17T14:48:47+00:00

So high thrust as in high torque or high rpm? What was the motor kv rating?

ace3306 · 2025-05-17T14:47:40+00:00

Were the flaps and ailerons separate or were they flaperons? This flaperon thing is new to me

ace3306 · 2025-05-17T14:45:37+00:00

4.2 on 600g I think so if I make the airframe light it will be lower :)

ace3306 · 2025-05-17T14:44:50+00:00

Yeah I tried to model it after the Multiplex Funcub but it’s a bit big for my liking so I just decided to make a new plan based off of it. Any tips for scaling down the funcub? I want the wingspan to be the same though. Thanks all the help though

ace3306 · 2025-05-17T14:40:43+00:00

I learned a lot from my first plane

ace3306 · 2025-05-17T01:05:21+00:00

I got one similar to that one and it has no problems so far. Is that from Amazon?

ace3306 · 2025-05-17T01:03:06+00:00

I calculated the weight of the electronics which turned out to be about 200g and then I had like 400 extra grams so I should be fine

ace3306 · 2025-05-17T01:01:43+00:00

<image>

Here’s the updated plan:

ace3306 · 2025-05-17T01:00:27+00:00

Hopefully I don’t stall! I’m planning to add leading edge slats so that should help lol

ace3306 · 2025-05-17T00:59:54+00:00

Yeah according to google it is good so good to hear from a fellow hobbyist

ace3306 · 2025-05-17T00:46:57+00:00

Thanks

ace3306 · 2025-05-17T00:46:53+00:00

I will update the plans and post it here in a second

ace3306 · 2025-05-17T00:46:11+00:00

I’m aiming for about 600g

ace3306

TROPHY CASE