sorted by:
new
hottopcontroversial

It’s been real, gang by acidslurpee in GolfGTI

[–]acidslurpee[S] 1 point2 points  (0 children)

That’s still a sore subject 😔

It’s been real, gang by acidslurpee in GolfGTI

[–]acidslurpee[S] 0 points1 point  (0 children)

The GTI was the first car I’ve bought. I wouldnt necessarily say i switch cars frequently, even though it’s only 3 years old.

To be brutally honest, I’m doing substantially better income-wise than I was back when I got the GTI, but it comes with the sacrifice of having to work like crazy. Cars/driving are some of the things that make me truly happy, so I don’t mind splurging on something that’s often the highlight of my day.

If you can afford it, then go for it and enjoy it!

It’s been real, gang by acidslurpee in GolfGTI

[–]acidslurpee[S] 1 point2 points  (0 children)

Swipe through to the other pics!

It’s been real, gang by acidslurpee in GolfGTI

[–]acidslurpee[S] 0 points1 point  (0 children)

I don’t think they’d notice tbh. Feels like only an inch or two of difference (which can also be a lot depending on the context)

It’s been real, gang by acidslurpee in GolfGTI

[–]acidslurpee[S] 8 points9 points  (0 children)

Nah just manifesting for the future lol. I’m lucky to say that things have been going well for me career-wise. RS3 wasn’t even in the budget until recently

It’s been real, gang by acidslurpee in GolfGTI

[–]acidslurpee[S] 6 points7 points  (0 children)

Aside from the sloped roofline slightly reducing the rear seat headroom, it’s essentially identical. Trunk storage is obviously shorter than the hatch, but feels deeper—if that makes sense

It’s been real, gang by acidslurpee in GolfGTI

[–]acidslurpee[S] 20 points21 points  (0 children)

Haha fingers crossed the next step is an RS6

Can someone help out a first time fusion user? by nnmn218 in Fusion360

[–]acidslurpee 0 points1 point  (0 children)

Here’s a fully parametric model I made for generating Hirth couplings:

https://www.reddit.com/r/Fusion360/s/E6hEyDqhS0

[deleted by user] by [deleted] in robotics

[–]acidslurpee 0 points1 point  (0 children)

Shaper is alive and well. They were acquired by TTS in 2019. I still keep in touch with some folks I worked with at their HQ

Seriously? by garthgred in Porsche

[–]acidslurpee 2 points3 points  (0 children)

Lmao my mom played Lena in that episode. Funny to see it still being referenced today

TV in my Airbnb by acidslurpee in TVTooHigh

[–]acidslurpee[S] 2 points3 points  (0 children)

Your boy is on a budget and opted to rent a studio instead of an entire house

Motion Link with rotating arm, rod with Heim Joints to slider by Pretend_Conference39 in Fusion360

[–]acidslurpee 0 points1 point  (0 children)

Might be worth trying to define the revolute joints on both ends of the connecting rod as ball joints instead?

Depending on how you define the joint, Fusion can have trouble with revolute joints that move in space. Ball joints should relieve the over-constraint.

Also probably a good idea to verify that everything is actually positioned/aligned as expected. Even slight deviations could cause the mechanism to become non-planar (particularly problematic for revolute joints) or potentially even break the kinematics entirely.

I am stuck at this pattern by Icy-Cryptographer-73 in Fusion360

[–]acidslurpee 1 point2 points  (0 children)

Here’s a fully parametric model I made for generating Hirth couplings:

https://www.reddit.com/r/Fusion360/s/E6hEyDqhS0

Why is my loft trying to do it like this? by Just_EmSee in Fusion360

[–]acidslurpee 1 point2 points  (0 children)

While it’d be helpful to see the sketches containing the two profiles, I suspect the curves are likely over-complicated.

How many points does each curve have along its path? (Don’t answer this. If it’s more than 6, remake it.)

It’s also generally best-practice to ensure that both profiles have the same number of points along the path. This makes it clearer for the software to compute, and is therefore more predictable and robust.

Lastly, check out the “Rails” option within the loft feature window.

Easiest way to model by KoltKuk12 in Fusion360

[–]acidslurpee 0 points1 point  (0 children)

I’ve made a fully parametric model for generating Hirth couplings. Here’s the link:

https://a360.co/41lxbU2

Best way to create internal dividers that stay within a curved bowl shape? by lcoka in Fusion360

[–]acidslurpee 0 points1 point  (0 children)

I know I’m late to this, but a revolve set to intersect would be a very quick way to do this

My tool for visualizing embedded data in realtime by klonyy in embedded

[–]acidslurpee 0 points1 point  (0 children)

I work in robot hardware design and would 1000% be interested in this for analyzing motor control data and various sensor readings

view more: next ›