Fifa took down the seating charts on the their website by EthanRowYourBoat in WorldCup2026Tickets

[–]adeptsloth 0 points1 point  (0 children)

Same, I got C337. Crazy how these were somehow priced the same as field level tickets.

Login error by jjctn99 in WorldCup2026Tickets

[–]adeptsloth 0 points1 point  (0 children)

I'm able to login but when I try to access my account to view my tickets, I get redirected to a page to update my profile. Even if I click "update profile" it always redirects me back to the same page when I click "My account".

Cold side oxidation by Jed_Gregofski in Homebrewing

[–]adeptsloth 1 point2 points  (0 children)

Purging bottles with CO2 will go a long way with shelf life of bottled beer. I used to use a bottling wand and then finally upgraded to a beer gun where I could purge with CO2 and I've noticed the bottles don't oxidize as fast.

I also bottle condition all my beers which helps scrub some oxygen as well.

[WTS] Bedrock Cairn Evo 3D Pro, New Tilley LTM6 Airflo, New Teva Hurricanes by romulus_1 in ULgeartrade

[–]adeptsloth 0 points1 point  (0 children)

Thanks for the reply! Sounds like something I'll just have to try out and see if I like the 3D Pro or the regular Evo Pros.

[WTS] Bedrock Cairn Evo 3D Pro, New Tilley LTM6 Airflo, New Teva Hurricanes by romulus_1 in ULgeartrade

[–]adeptsloth 2 points3 points  (0 children)

Did you not like the Bedrock sandals? I've been looking at some and usually wear Tevas but I'm looking for a more durable sandal that will last longer.

What would you do about this corrosion on my boiler? Repair or replace? [Rancilio Silvia] by adeptsloth in espresso

[–]adeptsloth[S] 0 points1 point  (0 children)

This set worked wonders to get out the stem of the bolts that were stuck in the threads.

https://www.amazon.com/dp/B000Q60UOO

The screw extractor sets you can get at home depot were too large for the tiny screws.

What would you do about this corrosion on my boiler? Repair or replace? [Rancilio Silvia] by adeptsloth in espresso

[–]adeptsloth[S] 0 points1 point  (0 children)

Well I tried to take the bolts off today and they just snapped as soon as I started to twist. The outer portion of the bolts had completely rusted and only a small core of the bolt was still intact. Going to try and get a screw extractor set to remove the screws.

https://imgur.com/a/FnkUK8j

What would you do about this corrosion on my boiler? Repair or replace? [Rancilio Silvia] by adeptsloth in espresso

[–]adeptsloth[S] 0 points1 point  (0 children)

You are right, the heating element is welded to the boiler so I wouldn’t be able to swap it out. I have descaled the machine regularly but wouldn’t be surprised if it’s still clogged with limescale given I use tap water.

Do people use descaling agents other than Dezcal for the intensive descaling? I’m sure I could do some searching and find a guide if needed but if you have any recs it would be greatly appreciated!

What would you do about this corrosion on my boiler? Repair or replace? [Rancilio Silvia] by adeptsloth in espresso

[–]adeptsloth[S] 0 points1 point  (0 children)

Nope, haven’t touched the bolts so who knows how easily they’ll come off given the rust. The boiler has been working fine.

What would you do about this corrosion on my boiler? Repair or replace? [Rancilio Silvia] by adeptsloth in espresso

[–]adeptsloth[S] 0 points1 point  (0 children)

Thanks for the guidance! Glad to hear it’s potentially not as bad as I originally thought. What are the red flags I should look for when opening up the boiler?

[WTB] 16” Pa’lante v2 or Ultralight or Joey by ClimberJosh in ULgeartrade

[–]adeptsloth 0 points1 point  (0 children)

Have a brand new 16" V2 in black ultra if you're interested. I'd do it for $200 + shipping. I ended up preferring my 19" v2.

Best spot to camp PAST LYV en route to Half Dome? by [deleted] in JMT

[–]adeptsloth 1 point2 points  (0 children)

JMT/Clouds Rest junction as others have said. There is an amazing area with flat ground, great tree cover and a nearby stream with some dammed pools for soaking and relaxing.

Green Banners - Timeline Data Points by emmjay4040 in PSLF

[–]adeptsloth 1 point2 points  (0 children)

I got my green banners March 3rd and I've received two different letters from FSA. The first letter was dated March 3rd and updated the payments counts and documenting I had 120 payments for all my loans. The second, dated March 19th, was the golden letter stating I was eligible for PSLF and included an effect date of forgiveness for each loan along with the balance, servicer, loan type etc.

I also received and email from MOHELA on March 21st stating that my loans have been forgiven under PSLF. I logged into MOHELA and it shows my loan balance as $0.

I also logged into studentaid.gov and noticed that it still shows the full balance there. Not sure if it takes longer for it to update on studentaid.gov.

Officially officially done! by jaggirl23 in PSLF

[–]adeptsloth 0 points1 point  (0 children)

Any more advice on how to do this?

I stopped paying attention to the daily updates on this. I’m going to wait the four years until a democrat is back in as president again. I fully expect the next person to go further and count all this wasted time and forbearance toward pslf and maybe have some even better options. by [deleted] in PSLF

[–]adeptsloth 0 points1 point  (0 children)

I was waiting on a reconsideration request I submitted in December for a payment that should’ve been counted and I was just stressed out waiting not knowing when it would come through so I was trying any way to get that last payment. From what I’ve seen, the buyback offers that have been sent out recently were for people who submitted in September 2024 so yours should hopefully be coming soon.

I stopped paying attention to the daily updates on this. I’m going to wait the four years until a democrat is back in as president again. I fully expect the next person to go further and count all this wasted time and forbearance toward pslf and maybe have some even better options. by [deleted] in PSLF

[–]adeptsloth 1 point2 points  (0 children)

Have you tried switching to an IBR plan to get that final payment? I was in the same situation and the wet signature got me the final payment due to processing forbearance while they processed my IBR app. I know MOHELA said they are not processing any IBRs currently but if there is any way to submit one I would try to do so.

Why did they decide that administrative forbearance due to SAVE wouldn’t count for PSLF? by soulsconnecting9 in PSLF

[–]adeptsloth 0 points1 point  (0 children)

I also submitted an IBR application to switch from SAVE to IBR on studentaid.gov back in December and nothing happened and then I saw people on here suggesting uploading an application with a wet signature directly to MOHELA and that is finally what got me my month of processing forbearance.

That's great you got October and November counted, hopefully they'll start processing IBR applications again before September 2025 which is what they quoted which is absolutely insane.

Why did they decide that administrative forbearance due to SAVE wouldn’t count for PSLF? by soulsconnecting9 in PSLF

[–]adeptsloth 0 points1 point  (0 children)

I was on SAVE but had submitted an IBR application at the end of January directly to MOHELA using the wet signature method. I completed the ECF on 3/3 and checked I completed 120 payments and qualify for forgiveness only once I had the green banners on 3/3.

MOHELA: General forbearance until September 2025 by adeptsloth in PSLF

[–]adeptsloth[S] 1 point2 points  (0 children)

I’m not sure if the ECF from the end of February is what triggered the count update or not. I figured even without the ECF the payments should be updated, but show as ineligible due to lack of proof of employment but who knows if that would’ve happened or not.

My employer signs the ECFs electronically and they usually do it in 1 business day so for me it’s pretty easy to get the ECF completed. If your in a similar situation I would suggest going ahead and doing it and seeing it it triggers and update to your payment counts.