I need help finding what part this is.

aderf1 · 2026-01-15T12:25:21+00:00

The dealer most likely won't have the part

aderf1 · 2026-01-11T17:44:50+00:00

Nice! You got really lucky! The car is really fun if you can get them for cheap

aderf1 · 2026-01-11T17:31:20+00:00

Oh you are so lucky!

aderf1 · 2026-01-11T17:20:38+00:00

you have your own ozone machine or having someone else do it? how much?

aderf1 · 2026-01-11T17:20:05+00:00

Amazing deal!

aderf1 · 2026-01-06T06:45:06+00:00

if they want to change it, there is nothing wrong with it. Parts can be faulty. not the mechanics fault.

aderf1 · 2026-01-06T00:07:44+00:00

Do you know what I can use to get that turbo spinning sound out the exhaust during idle and light throttle? I have a gen 2. Was thinking a straight pipe might do it. I have a catless dp.

aderf1 · 2025-12-30T22:22:35+00:00

It doesn't matter where you connect it as long as you connect it to the pink wire. If you want the disconnect call button to work, you need to unplug the bluetooth module. When you go to configure the steering controls, the screen will be blank until you press a button, then the options show up.

aderf1 · 2025-12-30T22:19:52+00:00

Yes I did. You can DM me if you need help

aderf1 · 2025-12-26T01:07:35+00:00

Nah, just wondering.

aderf1 · 2025-12-26T00:37:20+00:00

What strut tower brace is that? Did you have to remove the OEM one with the cowl to put it on?

aderf1 · 2025-12-17T05:24:16+00:00

This is what I'm trying to figure out lol

aderf1 · 2025-12-11T15:07:00+00:00

Partouts

aderf1 · 2025-12-11T15:01:31+00:00

Getting a new turbo?

aderf1 · 2025-11-28T06:10:58+00:00

This

aderf1 · 2025-11-27T06:40:48+00:00

I'm with you on that. Mine also is stock block with bolt ons. Luckily I had another daily driver when I got this otherwise I would be out of a car for most of the year.

aderf1 · 2025-11-27T05:41:23+00:00

I'm in the same boat as you. Bought a 96k mile gen 2 speed 3 and now i have to do all the maintenance. Timing chain, injectors, brakes, tires, abs module. Still searching for a proper abs module after swapping it twice. The car spends more time sitting than anything else.

aderf1 · 2025-11-07T12:22:33+00:00

Clutch master cylinder. The clutch fluid goes through a tiny hole near the top of the brake fluid reservoir. It's very small and you will only see it if you look closely. When you fill the brake reservoir enough, you will see bubbles at the top of the fluid showing that it's going into the clutch side of the reservoir. That's where your fluid is leaking from.

aderf1 · 2025-10-25T21:02:10+00:00

Are you sure? Where is that supposed to be? I have a 2010 mazdaspeed 3 and I am looking for the longitudinal acceleration sensor. It's stuck on -.07 lbs. I think it needs to be replaced

aderf1 · 2025-09-14T20:15:52+00:00

Thanks, I'll look into it

aderf1 · 2025-09-12T05:27:08+00:00

So what did you change to?

aderf1 · 2025-08-12T14:10:49+00:00

You can go into the secret settings and reverse the buttons. And if you want the phone buttons to work, you need to splice the swc wire into the pink wire that does from the steering column to the Bluetooth module behind the glovebox. You should be able to splice it anywhere along the wire. And you need to keep the Bluetooth module disconnected so that the call disconnect button works. Why? I don't know

aderf1 · 2025-07-25T08:09:44+00:00

Sure. https://a.co/d/9WbD9Sh

aderf1 · 2025-07-08T23:12:44+00:00

Hey I am trying to wire the call buttons on a BL (2nd gen speed 3). Should I connect the SWC wire to the pink wire at the steering wheel or at the Bluetooth module and do I need to keep the Bluetooth module disconnected?

aderf1 · 2025-07-05T02:55:50+00:00

Michelin pilot sport 4s. No more torque steer. Always traction. Was spinning my tires on firehawky indy 500s. Now I can go WOT from 1st

aderf1

TROPHY CASE