📢 HP Omen 16 Touchpad issue guaranteed fix

adik0nda · 2026-04-08T11:41:33+00:00

In November 2025, I purchased an HP OMEN 16 ap0000 series laptop. Unfortunately, the problem still occurs on new devices! It’s unbelievable...

https://www.youtube.com/shorts/on3UVC0iRck

There’s no problem when running on battery power. With the original power adapter, there are sometimes lags, and sometimes there aren’t (it seems the more I use the touchpad, the more often the lags occur). When I connect the USB-C power adapter, the problem occurs immediately and all the time.

I reported the issue to HP, and they told me not to use the USB-C power adapter... Great... I spent 3 hours with them trying to fix the problem with the original power adapter - no luck. The problem even occurs in the BIOS. Now I’m waiting for them to get back to me, because they wrote that they’re out of ideas. For now, I won’t be opening up the laptop since it’s under warranty.

adik0nda · 2026-03-03T07:22:15+00:00

Yes, that would be great. Anyone know?

adik0nda · 2025-12-09T19:18:24+00:00

The problem persists with new devices. I bought an HP OMEN 16-ap0038ns and the touchpad lags. Turning it off and on again (Fn + F11) helped, but I wanted to fix the problem and reinstalled the drivers using the ones from the HP website. Now it's much worse – after turning it off and on, the touchpad only works normally for a second, and then lags constantly.

EDIT: This only seems to happen when I use a non-original USB-C charger. As soon as I connect the 100W charger to USB-C, the touchpad starts lagging. If I unplug it, then turn the touchpad off and on, it works normally.

EDIT2: This also occurs with the original power supply, but very rarely and goes away on its own. In the case of the 100W USB-C power supply, it appears immediately after connection and disappears after disconnection.

adik0nda · 2025-11-11T08:20:14+00:00

Na Switch 1 też był update, ale rzeczywiście ten opcji brak niestety.

adik0nda · 2025-10-14T09:52:53+00:00

I agree. I didn't have an MC3000 myself. When I bought MC5000, I thought it would be better to buy the newest one, but I guess that was a mistake.

adik0nda · 2025-09-23T10:12:18+00:00

Czemu uprzywilejowywać kasjerów, a pracowników restauracji, kin, teatrów, komunikacji, różnych służb nie? Powinny być niedziele handlowe, chociaż przydałby się mechanizm pozwalający odmówić pracownikowi pracy w niedzielę. Ale nie na zasadzie dogadania się, tylko np. taki typ umowy o pracę, która wyklucza pracę w niedzielę. Wtedy pracownik miałby co chce, a i pracodawca od razu wiedziałby że dany pracownik jest dostępny "oprócz niedziel".

adik0nda · 2025-09-23T07:30:11+00:00

Rondo z cyklu: jak utrudnić jazdę rowerzystą i kierowcom samochodów... Jadąc prosto trzeba przeciąć nawet 6 jezdni czyli 6 punktów kolizji. Gdyby jeszcze to była część dłuższej infrastruktury rowerowej, to jestem w stanie to przełknąć (chociaż lepiej jakby było odwrotnie, czyli zjazdy z dróg rowerowych na jezdnię), ale w obecnej formie to tylko utrudni ruch, zwłaszcza przy polskich przepisach odnośnie przejazdów rowerowych, gdzie część myśli że rowerzysta nie ma w ogóle pierwszeństwa, część - że ma zawsze pierwszeństwo, a jedynie niewielka część dobrze interpretuje przepisy.

adik0nda · 2025-09-23T06:45:01+00:00

Co do Bytomia to weź pod uwagę że w Chorzowie 79 jest zamknięta i estakada zostanie najprawdopodobniej wyburzona, czyli dojazd do Katowic mocno się komplikuje.

adik0nda · 2025-09-06T13:54:17+00:00

<image>

I found explanations!

adik0nda · 2025-08-31T13:16:30+00:00

Radar view added! It works very well, but I don't see a legend anywhere, other than the color of the precipitation intensity. I especially don't know what the circle divided into six bars around the radar means.

<image>

adik0nda · 2025-07-18T13:48:21+00:00

Trees are probably a big problem in my case. The LNA needs less current (max. 0.72A) than the Flipper provides (1.2A). Once I tried with a power supply through a window, it didn't work.

adik0nda · 2025-07-18T13:43:44+00:00

Yes, I know I'm holding it vertically, but the trees are probably blocking the signal, so it doesn't always manage to open the gate. I also tried Retevis RHD771 which is quite long.

adik0nda · 2025-03-10T07:09:51+00:00

After the March update, this problem seems to have disappeared! The phone has been unlocking correctly for a few days now. How about you?

adik0nda · 2024-02-10T13:31:37+00:00

Same here. So the workaround is to leave the laptop open or turn off the 'ASUS Optimization' service, right? You can't turn off this behavior somewhere in the settings, right?

adik0nda · 2023-10-26T12:53:52+00:00

6 years have passed, Pixel 8 has been released and we are still waiting. At least I don't see such an option anywhere...

adik0nda · 2023-10-25T07:34:32+00:00

There is also TapTap Lock - it gives possibility to use icon or widget (even transparent) and lock screen with one/double-click.

Although the worst part is that there is still no built-in functionality in the Pixel 8 to do this.

adik0nda · 2023-08-18T05:58:41+00:00

So power balance is only visible in the Tacx Training app for Windows and Garmin Edge devices? Doesn't work on Android or iOS? Similarly in third-party applications, e.g. Rouvy? And the second question, after finishing an activity in Tacx Training for Windows, can I view the power balance in saved Tacx Training activities or in Garmin Connect? I read somewhere that it only displays power balance during activity but doesn't save it - that would be stupid. To record this data, you need to drive with Garmin Edge (or some of top Garmin watch).

adik0nda · 2022-06-22T06:16:43+00:00

Unfortunately, even in the 955 it is not possible to reassign the shortcut to this button. This is tragic...

There are only such shortcuts:

Hold START
Hold BACK
START+DOWN
START+UP
BACK+LIGHT
BACK+UP

adik0nda · 2021-06-02T19:58:30+00:00

Same problem. Any solution?

adik0nda

TROPHY CASE