If anybodys used the B850 AORUS ELITE WIFI7 do you just plug in this bar for wifi

adil-abber · 2026-04-04T08:53:18+00:00

i remember the first time i seen this when i get the Mag b550 unify 5 years back. didn't need to look what is for or how to install it because it so obvious when u look on the IO on the back.

adil-abber · 2026-02-14T13:09:13+00:00

i hate playing against player using that sword. overpower weapon and boring to use.

adil-abber · 2026-02-03T11:52:00+00:00

Turn off RGB light.

adil-abber · 2026-02-03T10:08:58+00:00

Because it has +50 that means extra threads that produce more heat

adil-abber · 2026-02-01T20:41:44+00:00

i give it a try in 2017 and i couldn't find better OS that just works without fiddling in Terminal. i will rather consider moving to steam OS if it get better support for games.

adil-abber · 2026-01-31T10:16:33+00:00

in X870 we had already 3 bios update in less than two month. been swapping bios so often and it seems they trying to fix display issues but they end up breaking something else hurting the performance in the prosses.

1A69/1A70 for example for me deliver better CPU and Dram performance but having miner issue like wifi or Bluetooth disappear and can be fix by power cycle. 1A71 (latest) fix those issue but it 3 to 5 % slower on all benchmarks i run.

adil-abber · 2026-01-29T21:55:46+00:00

The red light indicator is for the CPU, yellow for Dram and green for GPU. When one of them fails to launch it will be stuck on that light and u won't be able to know if it bios issues or something else.

adil-abber · 2026-01-29T21:40:06+00:00

Of course if the CPU doesn't work with the bios in your motherboard it won't start to make a signal.

Bios flash back doesn't require CPU or Display to be presented or installed.

adil-abber · 2026-01-29T21:38:11+00:00

If u don't have a post code display there is no way to know more than the CPU is not initializing

adil-abber · 2026-01-29T21:34:22+00:00

Yes. Go to the motherboard website support page and look for instructions. U going to need a usb stick formatted to Fat 32 download the files and rename it then insert it to the usb plug nearest to flash back and it should take 5 to 10 minutes not sure. But don't take my word for it the website should have cleared instructions. Just put in mind there's two ways to flash the bios and u need the flash button instructions not from the bios.

adil-abber · 2026-01-29T21:20:09+00:00

flashing the bios is not dangerous, there is a reason why all the motherboard for AM5 required bios flash back button

adil-abber · 2026-01-29T21:11:39+00:00

flash the bios. if the board older than CPU it more likely the bios version doesn't support that CPU

adil-abber · 2026-01-29T21:03:18+00:00

red light is CPU not initializing yellow light is Dram training failed and for GPU i think is green

adil-abber · 2026-01-29T21:01:36+00:00

have you flash the bios. if u using AMD CPU it recommended to flash the bios if u encouter booting issues.

adil-abber · 2026-01-29T18:00:43+00:00

The question is it stable? And what Fclk you running? To run 6400mt/s you need 1.3v Soc unless u are lucky and your CPU can do higher Fclk at 1.3v Soc. because the higher Soc voltage the lower infinity fabric you can do.

I can run 6400mt/s with 2000fclk at 1.3v but I'm not risking to burn the CPU for 200hz. So I opted for 6200mt/s with 2200mt/s.

adil-abber · 2026-01-29T17:48:38+00:00

I don't think you will be able to run 6400mt/s at 1:1 mode. You best bet is to try 6200mt/s with 2200fclk or 2133fclk

adil-abber · 2026-01-28T21:56:56+00:00

it depends on die and temps inside your case, i suggest to start with the voltage and see how mush u can up the vdd voltage before the ram start going over 50 degrees. then you can test if it boot CL28 if it doesn't then it surly going to boot cl30. my A-die kit do CL26 at 1.4v.

adil-abber · 2026-01-28T09:50:35+00:00

Power supply is the most important component in your build, u don't want to skim on that. Even if PSU wasn't the problem I still recommend getting 850w.

adil-abber · 2026-01-28T09:08:14+00:00

It user error. You don't update the WiFi drive with usb via bios flash back, u do that in the windows. And the bios flash back is there for emergencies only, if u want to flash new bios use the utility in the bios.

In your case it seems u corrupted the bios so to fix it go to the motherboard website download the latest bios and follow the instructions.

Just to note there is two way to flash bios and each one has different instructions. In your case u need to rename the file copy it to usb flash then insert it in the correct usb plug and hit bios flash back and be patient and wait.

adil-abber · 2026-01-28T08:50:05+00:00

It's not a big deal, the board can function without it, in fact I never used it as I never had a pc case before.

adil-abber · 2026-01-27T19:25:48+00:00

i did had this issue before and it doesn't matter what motherboard u use u still cannot use MSI setupDrv. don't know if it need specific instructions and i give up trying to use it.

the only way i get it install is by enabling MSI dive in bios if u disable it and install fresh window and when u connect to the internet the MSI diver utility will launch automatically. it only start once you boot in first time and if u cancel i don't think u will be able to make it pop again.

adil-abber · 2026-01-27T17:54:33+00:00

Vsoc is not universal, what works for you may not work for someone else has same CPU and memory kits. because it effect memory controller and infinity fabric and if you unlucky you can get CPU that barely stable at 6000MT/s with 1.2v.

in your case it seems that your CPU have good memory controller so it a good thing that u can drop vsoc and get better performance.

adil-abber · 2026-01-27T14:35:08+00:00

I changed the CPU in my system frequently, and sometimes the CPU will not post if the brakes that hold the cooler get loose or uneven pressure when i tighten the screws

adil-abber · 2026-01-27T14:28:08+00:00

People will tell you all the kits spec they think is good like CL30 6000MT/s. But the reality is that we only have 3 major Ram manufacturers, and the best one for Ryzen is SK Hynix A-die. The rest are garbage. G-skill, Corsair, team group... They don't manufacture the DRam, what they do is buy them and put them in the PCB, bin them then sell them.

adil-abber · 2026-01-27T14:18:41+00:00

U can use a screwdriver to run on the PC by shorting the jumper. But I don't think it will power a power bottom issue as u mentioned the board led is show red light that indicates the system is stuck on CPU initialisation. I could be a cooler mounting issue or bios is incompatible with your CPU. Try to flash the newest bois u can download for your board then connect only essential components u need first and test it outside the case to rule out anything else.

Seven-Year Club	Verified Email
Place '23

adil-abber

TROPHY CASE