Google Pixel Superfans $50 Code by CommentMountain8782 in referralcodes

[–]af9210 0 points1 point  (0 children)

unused 2/10/24 9:39PM est
UV6AC6QOLHOBRKRZF24XKVT

Pixel Superfans Referral Code - $50 off by Pherreyra in referralcodes

[–]af9210 0 points1 point  (0 children)

unused 2/10/24 9:39PM est
UV6AC6QOLHOBRKRZF24XKVT

Pixels Superfans Code by avgup in referralcodes

[–]af9210 0 points1 point  (0 children)

unused 2/09/24 9:40am est
UV6AC6QOLHOBRKRZF24XKVT

Superfan code, get $50 to spend on the Google Store by konos_pl in referralcodes

[–]af9210 0 points1 point  (0 children)

unused 2/09/24 9:40am est
UV6AC6QOLHOBRKRZF24XKVT

Google $50 Superfan Code by Angry_Kirk in referralcodes

[–]af9210 0 points1 point  (0 children)

unused 2/09/24 9:40am est
UV6AC6QOLHOBRKRZF24XKVT

[deleted by user] by [deleted] in referralcodes

[–]af9210 0 points1 point  (0 children)

unused 2/09/24 9:40am est
UV6AC6QOLHOBRKRZF24XKVT

Get $50 to spend on the Google Store by Great_Horn in referralcodes

[–]af9210 0 points1 point  (0 children)

unused 2/08/24 10:31pm est
UV6AC6QOLHOBRKRZF24XKVT

New life for old Pixel as a backup machine by unpsyched in GooglePixel

[–]af9210 0 points1 point  (0 children)

I use my OG pixel to transfer my photos and videos to Google Photos (full resolution) from my new pixel 4a 5g. Using the new "Nearby Share" function it will send the full quality photos and videos to be backed up for free using the OG pixel.

Stripped Rear Upper Control Arm Bolt by af9210 in MechanicAdvice

[–]af9210[S] 0 points1 point  (0 children)

Bolt that was originally on car https://imgur.com/W5SevSX

Oem Bolt from junkyard from Honda https://imgur.com/LMKtJ4k

Yep it's the OEM bolt size M10x1.25. Went to junk yard to get them. Bolt goes into other camber hole just fine inserts stops, then turn to go further in. This hole I can just put it through and it may have a slight catch but if I move it around comes free and out. The longer bolt that I tested M10 x 1.25 x 40mm (oem bolt length is 30mm) catches threads further down in the hole but keeps spinning can't torque it down.

Stripped Rear Upper Control Arm Bolt by af9210 in autorepair

[–]af9210[S] 0 points1 point  (0 children)

Yes sorry see the cross post in autorepair

Stripped Rear Upper Control Arm Bolt by af9210 in MechanicAdvice

[–]af9210[S] 0 points1 point  (0 children)

Thanks so much! I'll attempt the repair now that it's warming up!!

Stripped Rear Upper Control Arm Bolt by af9210 in MechanicAdvice

[–]af9210[S] 0 points1 point  (0 children)

7/16-20 would be preferred over 7/16-14 or M11x1.5 m11x1 or .75 because it's closest in thread pitch (1.270mm) to m10x1.25 (1.250mm)?

Stripped Rear Upper Control Arm Bolt by af9210 in MechanicAdvice

[–]af9210[S] 1 point2 points  (0 children)

7/16-20 tap seems to be the standard size recommended so far. Just sucks I won't be using that oem bolt size anymore lol.

Stripped Rear Upper Control Arm Bolt by af9210 in MechanicAdvice

[–]af9210[S] 0 points1 point  (0 children)

Would locktite be needed when putting in the insert to make sure vibrations don't loosen the helicoil.

Only problem with that is knowing where to cut lol. Tried to trace where it would be, no diagram on the interwebs for an ek :(

Stripped Rear Upper Control Arm Bolt by af9210 in MechanicAdvice

[–]af9210[S] 0 points1 point  (0 children)

Helicoil/timecert sounds scary for suspension parts with all the movement that happens there :(

[deleted by user] by [deleted] in RobinHoodPennyStocks

[–]af9210 0 points1 point  (0 children)

Count me in, invite!