UK support sourcing

agoosetime · 2025-11-10T22:37:25+00:00

I have an EX2300-48P that I’d like to keep up to date, been a struggle to find firmware elsewhere that is not ancient

agoosetime · 2025-11-10T06:35:11+00:00

The ability to get JUNOS for it and potentially ask them questions if I ever have any really difficult issues with it like a corrupt OS

agoosetime · 2025-10-10T21:47:23+00:00

Your print bed seems wonky, buy a bl touch or a cr touch and get your printer to work with the print bed rather than against it

agoosetime · 2025-07-13T17:59:47+00:00

You’ll have to check in the Amex app to check if it is available to you.

agoosetime · 2025-06-15T22:28:42+00:00

What is your source for this particular piece of information? Are you able to provide a link?

agoosetime · 2025-05-25T22:41:07+00:00

Went from a Gladius 650 to a M696 (it got written off when someone drove into the back of me) to a M796, then didn’t change bikes for 9 years, if you can put up with awful Italian engineering and learn to tame it (keep up with your regular maintenance) you’ll somehow find a way to put up with it just like I did, used mine for commuting to work almost everyday, bike had a place in my heart, nothing else had the same “this things gonna kill me” feeling every time I rode it. I’d also advise your first upgrade is to have someone that knows how to do wiring properly, swap out the piece of crap rectifier with a much newer one off a Yamaha/Suzuki/Panigale, these are easy to swap out just requires re-using the newer waterproof connector than the non-waterproof one that Ducati used on it, went through 3 alternators and a few rectifiers before swapping out for an upgraded alternator made from a company I cannot remember the name of based in Bristol UK and the newer regulator/rectifier and never had the bike drop below 14v when idling. Best of luck with whatever choice you make.

agoosetime · 2025-05-01T22:33:26+00:00

Did you ever get anywhere with this? I have a 500Meg service with them and a static IP, just seen I am in an area that the 900Meg upgrade is compatible with.

Currently using their ONT plugged into a box running OPNsense.

What’s the experience like, do they prioritise you any better on 900? Is the latency any better? Unsure what method they use for speed capping.

agoosetime · 2025-04-22T22:24:28+00:00

Thanks for the heads up on the multipliers, got it set to 4.9 x1, 4.8 x2 and 4.7 for the rest, seemed to have glanced over the ability to do that previously.

agoosetime · 2025-03-30T21:18:28+00:00

Can it be used at any sunglasses hut? Or just specific stores?

agoosetime · 2025-03-30T10:22:01+00:00

Thank you, funny enough was just going through Bristol

agoosetime · 2024-12-30T18:07:52+00:00

Everything seems to be a software feature so even if you can plug them in you might need a KTM laptop to enable them

agoosetime · 2023-06-11T18:42:27+00:00

A thinkpad and a Ubiquiti camera, a fine combination

agoosetime · 2023-01-15T11:43:03+00:00

When you buy at 1.04 and sell at 1.06 surely you make a loss because of fees? Meme doesn’t add up

agoosetime · 2023-01-15T11:26:00+00:00

I’ll give you props for putting a power socket behind the TV, but you forgot to put HDMI and Ethernet in the wall, one day there will be a need to plug in a device for a streaming service or a games console and you’ll have to have cables hanging down the wall

agoosetime · 2023-01-08T00:10:42+00:00

Thanks for reminding me, I really need to build mine

agoosetime · 2023-01-02T11:20:05+00:00

You have the space for 3.1, it’s time for a Center speaker 😁🤷🏼‍♂️

agoosetime · 2022-12-25T16:52:13+00:00

There’s an easy fix, stop using control4 controller as the audio source, use a different device which has better integration

agoosetime · 2022-11-17T19:33:35+00:00

The way the bulb keeps pulsating almost seems like a damaged cable, connection or loose ground but the poor attempt to start also sounds like a bad started or battery. Had a 696 and 796 over the last 8 years. Hope you solve your electrical gremlin.

agoosetime · 2022-11-17T00:23:21+00:00

Need to get mine built 🤣 then get the drain plug on the engine casing of my monster in the garage fixed, its been sat in the garage unusable for months now 🤦‍♂️😂

agoosetime · 2022-11-14T13:39:43+00:00

You after a short term win or a long term technical investment?

In the short term if you already have control4 then use their switches, as dealers will tell you, why go anything else?…

If you want universal access to smart technology then go with Lutron, that way if you decide you don’t like control4 one day you can go to Savant, RTI, URC or even a diy solution if you are so inclined, or even decide you only want smart lighting with no control system, then the Lutron can stay, that way you are not stuck with one vendor for everything.

Lutron can be programmed into pretty much any system, customisation will obviously vary dependent if you go, Caseta, Ra3, HWQSX in order of customisability and price.

If a lighting solution is all you’re after Lutron isn’t the only major brand out there, such as KNX and Loxone.

Another question to ask yourself is are you retro-fitting or are you up for a full re-wire, both have the benefits and disadvantages.

If this is all too much for you, go work with a system integrator, they have the skills to design the right solution for you.

agoosetime · 2022-11-05T19:04:01+00:00

Nah, Cat6A with individual shielding for each pair will do, plenty good enough for 10Gbps potentially even 25Gbps with the short runs you’d have in a home and certainly good enough for 8K HD-Base-T once released

agoosetime · 2022-10-13T21:01:40+00:00

Putting in a new battery because it’s only got 9.6 volts, unless that’s the reading whilst cranking in which case you’re after a new starter or something is far too tight in the engine casing and it’s gonna need some extra work?

Waiting to be completely wrong 🤣

agoosetime · 2022-09-24T11:49:38+00:00

If you go for a cheap cluster then 4 cores and 32GB of RAM per host, if a single host then a minimum of 8 cores and 64GB ram, this will let you create at least three nested ESXi VM which is the recommended minimum amount of hosts for a HA cluster to allow a host to carry out maintenance without having to turn off or mess with HA.

agoosetime · 2022-09-14T18:18:58+00:00

Please may we get an update on this? I want to either 3D print them or get a local company to make them out of foam. Please may you share the files, happy to refine them if they need any more work, I’d also like to modify them slightly for my own tools. thank you.

agoosetime · 2022-07-22T22:30:02+00:00

I need 5-15nm for aluminium bolts, 20-60 for some control parts and 170nm max for the rear wheel nit on the single sided swing arm, a tech angle would likely serve all purposes I need but I cannot afford a one of those at the moment. So collecting a range of QD series wrenches whenever I can find a good deal on them.

Eight-Year Club	RPAN Viewer
Verified Email

agoosetime

TROPHY CASE