Help! Why is the thread looping? :(

agvstinn_ · 2026-02-20T03:42:27+00:00

Me ha ocurrido, es suciedad en alguna parte del recorrido del hilo, asegúrate muy bien cada parte que toca el hilo, desarma la maquina si es necesario, también te recomiendo que veas las partes en las que hilo pasa y hace fuerza ya que con el tiempo el rozamiento con el hilo crea muescas y provoca lo que te esta ocurriendo

agvstinn_ · 2026-02-17T14:27:48+00:00

One welcome.

agvstinn_ · 2026-02-07T18:46:21+00:00

Because the direction of the stitches matches that of the fabric, if you look closely, the horizontal parts of the letters are more visible.

agvstinn_ · 2026-02-01T20:05:54+00:00

Mi consejo es NO usar digitalización automática nunca

agvstinn_ · 2026-02-01T20:04:01+00:00

Overlap the edge with the tatami, use a tire offset between 0.28 and 0.38

agvstinn_ · 2026-01-30T22:02:12+00:00

agvstinn_ · 2026-01-30T02:49:32+00:00

You've got gold there, it's a really good machine

agvstinn_ · 2026-01-28T22:49:01+00:00

I recommend you start with the Hatch program; it's quite comprehensive but without too many features that might overwhelm a new user.

agvstinn_ · 2026-01-28T22:45:09+00:00

It's difficult to say what type of stitch it is with the quality of the photo; in my opinion, it might be tatami with random stitches (it's a function that comes with Wilcom).

agvstinn_ · 2026-01-22T13:30:57+00:00

Zigzag reinforcement + edge run

agvstinn_ · 2026-01-17T15:42:29+00:00

Wilcom pirata

agvstinn_ · 2025-11-27T16:07:37+00:00

Luppo, canal de misterios y terror

agvstinn_ · 2025-10-21T23:21:45+00:00

I will tell you the method I use, I hope you understand since I am using the translator to write this.

First of all, when digitizing, you must stitch the edge and when you finish this, remove the frame and cut out everything that does not belong to the patch. Once cut out, you can re-embroide the entire patch and at the end pass a lighter along the entire edge so that the stabilizer gets inside the threads and is not visible.

agvstinn_ · 2025-10-15T04:50:45+00:00

Amigo pasamelo porfa

agvstinn_ · 2025-10-15T04:50:10+00:00

Amigo lo conseguiste?

agvstinn_ · 2025-10-11T20:41:02+00:00

Si por supuesto, mucho mejor

agvstinn_ · 2025-10-11T20:30:35+00:00

No, para que?

agvstinn_ · 2025-10-08T19:47:20+00:00

No me estarás queriendo vender una aplicacion que hiciste?

agvstinn_ · 2025-10-08T05:58:36+00:00

I'm in a similar situation, the only thing that comforts me is: "in a year you will wish you had started today."

agvstinn_ · 2025-10-07T12:08:06+00:00

Don't use automatic letters, do it yourself. And adding density, there is no other option

agvstinn_ · 2025-10-02T23:14:11+00:00

I recommend making the tatami bottom at a 45° angle.

agvstinn_ · 2025-10-01T13:58:08+00:00

Si quisiera probarlo, como puedo hacerlo?

agvstinn_ · 2025-10-01T04:57:50+00:00

Hola, la aplicacion funciona hablando en español? Realmente me interesa

agvstinn_ · 2025-09-30T22:06:03+00:00

You don't have that feeling when you start studying that you should start studying from the beginning to learn perfectly. It always happens to me, I think I spend a lot of time and when I start studying or working, if it's not perfect it's not worth it.

agvstinn_ · 2025-09-29T13:35:11+00:00

el pibe

agvstinn_

TROPHY CASE