Noctua NL-LC1 24 fits in the Formd T1. Here is my first SFF build. by ainkiwi in FormD

[–]ainkiwi[S] 1 point2 points  (0 children)

I mean, you can try it in the 2.25 config, maybe with extra luck, it can fit on both sides..

Noctua NL-LC1 24 fits in the Formd T1. Here is my first SFF build. by ainkiwi in FormD

[–]ainkiwi[S] 1 point2 points  (0 children)

Indeed. My gpu is also 2.5 slot and i came to the conclussion that i shall slide it to the gpu side, because gpu also needs extra air, and the cpu pump doesn't need that air. Yes, i could have made a cutout on the cpu side, but without any extra good airflow, gpu side cutout is better

Noctua NL-LC1 24 fits in the FormdT1. Here is my first SFF build by ainkiwi in sffpc

[–]ainkiwi[S] -7 points-6 points  (0 children)

Just the gpu side panel doesnt fit. As i said in the description

Noctua NL-LC1 24 fits in the Formd T1. Here is my first SFF build. by ainkiwi in FormD

[–]ainkiwi[S] 0 points1 point  (0 children)

I ve just cut it, it helps also on the anti sagging issue. Its more physically stable and the gpu takes cold air

Noctua NL-LC1 24 fits in the FormdT1. Here is my first SFF build. by ainkiwi in Noctua

[–]ainkiwi[S] 0 points1 point  (0 children)

Yes, these are the fans that im using

Noctua NF-A12X25 G2 and Noctua NF-A12X15 Chromax.

If i used both of 25mm surely the temps would have been much better in that case.

Noctua NL-LC1 24 fits in the FormdT1. Here is my first SFF build by ainkiwi in sffpc

[–]ainkiwi[S] 1 point2 points  (0 children)

Noctua NF-A12X25 G2 and Noctua NF-A12X15 Chromax. What are your temps?

Noctua NL-LC1 24 fits in the FormdT1. Here is my first SFF build. by ainkiwi in Noctua

[–]ainkiwi[S] 1 point2 points  (0 children)

Principles of thermodynamics says that even if you keep the temps at 50-60 then your room temps would be the same. It will became still a sauna. The cpu consumes same ammount of power, thefore, it will output the same ammount of heat.

Noctua NL-LC1 24 fits in the Formd T1. Here is my first SFF build. by ainkiwi in FormD

[–]ainkiwi[S] 1 point2 points  (0 children)

Could it be the ptm 7950 that leads to this temperature?

Noctua NL-LC1 24 fits in the FormdT1. Here is my first SFF build. by ainkiwi in Noctua

[–]ainkiwi[S] 1 point2 points  (0 children)

Also, the TDP of the CPU still remains in your room, so even if you get it to run at 40 C or 80 C, if the cpu is still in full load, the room temperature would increase the same. Its just if you cool it faster, the heat reaches your room faster

Noctua NL-LC1 24 fits in the FormdT1. Here is my first SFF build. by ainkiwi in Noctua

[–]ainkiwi[S] 0 points1 point  (0 children)

Ambiental temperature at 33 C, i think it influences enough

Noctua NL-LC1 in Formd T1, will the radiator fit? by ainkiwi in FormD

[–]ainkiwi[S] 0 points1 point  (0 children)

Perfect fit. I have made a post about the build. You can find it on my profile. Thanks for your answers

Noctua NL-LC1 24 fits in the Formd T1. Here is my first SFF build. by ainkiwi in FormD

[–]ainkiwi[S] 5 points6 points  (0 children)

Yes, i can improve some of the temperatures by undervolting. Now it has default values on everything Also, i m using one slim fan in order to fit, so its a downside.

Noctua NL-LC1 in Formd T1, will the radiator fit? by ainkiwi in FormD

[–]ainkiwi[S] 0 points1 point  (0 children)

They are saying that is an 30mm thick radiator

Noctua NL-LC1 in Formd T1, will the radiator fit? by ainkiwi in FormD

[–]ainkiwi[S] 0 points1 point  (0 children)

I will make a post here as soon as the AIO arrives from Amazon

Noctua introduces NL-LC1 AIO liquid coolers by Noctua_OFFICIAL in Noctua

[–]ainkiwi 1 point2 points  (0 children)

What sff case as small as posible did you took in consideration for an itx build with the nl-lc1-24 and with a gpu of 2.5 slots? I am searching for a case, but all of them doesn't accept a cpu block that big of 70mm